• 한국재료학회지
• /
• 제24권7호
• /
• pp.351-356
• /
• 2014

A spherical $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor for use in white-light-emitting diodes was synthesized using a liquid-state reaction with two precipitation stages. For the formation of phosphor from a precursor, the calcination temperature was $1,100^{\circ}C$. The particle morphology of the phosphor was changed by controlling the processing conditions. The synthesized phosphor particles were spherical with a narrow size-distribution and had mono-dispersity. Upon excitation at 395 nm, the phosphor exhibited an emission band centered at 497 nm, corresponding to the $4f^65d{\rightarrow}4f^7$ electronic transitions of $Eu^{2+}$. The critical quenching-concentration of $Eu^{2+}$ in the synthesized $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor was 5 mol%. A phosphor-converted LED was fabricated by the combination of the optimized spherical phosphor and a near-UV 390 nm LED chip. When this pc-LED was operated under various forward-bias currents at room temperature, the pc-LED exhibited a bright blue-green emission band, and high color-stability against changes in input power. Accordingly, the prepared spherical phosphor appears to be an excellent candidate for white LED applications.

• 한국세라믹학회지
• /
• 제31권6호
• /
• pp.651-659
• /
• 1994

BaTiO3 ceramics were sintered on Al2O3, MgAl2O4, MgO and Mg-, Ca-, Y-stabilized zirconia setters. Then the influence of setters on the microstructure of BaTiO3 ceramics and the stability of setters were investigated by SEM, EDAX and XRD analyses. The microstructure of BaTiO3 ceramics sintered on Al2O3, MgAl2O4, MgO and Mg-PSZ showed large grain growth, but little grain growth on Ce-TZP(Tetragonal Zirconia Policrystal). Mg-PSZ(Partially Stabilized Zirconia), Ca-PSZ, Ce-TZP setters showed extensive phase transformation. Y-TZP and fused Y-SZ (Stabilized Zirconia) setters were stable. The liquid sintering aids of BaTiO3 ceramics accelerate mass transport. The reaction of SrTiO3 in BaTiO3 with ZrO2 resulted in the formation of SrZrO3.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.633-638
• /
• 2011

Mn이 치환된 헥사알루미네이트 촉매인 $LaMnAl_{11}O_{19}$, $BaMnAl_{11}O_{19}$, $SrMnAl_{11}O_{19}$을 $(NH_4)_2CO_3$ 공침법을 이용하여, $1,200^{\circ}C$ 5시간 소성을 통해 제조하였다. X-선 회절, 질소흡착을 통해 촉매의 결정구조와 비표면적을 분석한 결과, 결정 격자 내 거울면에 La이 존재하는 $LaMnAl_{11}O_{19}$이 $BaMnAl_{11}O_{19}$과 $SrMnAl_{11}O_{19}$보다 우수한 헥사알루미네이트 결정 구조를 가지는 동시에 13 $m^2/g$의 높은 비표면적을 가지고 있었다. 또한 SEM 분석을 통해 $LaMnAl_{11}O_{19}$이 특유의 판상구조가 잘 발달함을 확인하였다. 메탄 연소 활성은 다음과 같은 차례로 증가하였고: $LaMnAl_{11}O_{19}$ > $SrMnAl_{11}O_{19}$ > $BaMnAl_{11}O_{19}$. 메탄 연소 활성은 비표면적에 의존하였다. $LaMnAl_{11}O_{19}$에 60 wt%의 $CeO_2$를 첨가하고 $700^{\circ}C$의 저온에서 소성한 경우 $700^{\circ}C$의 저온에서 100% 전환율에 도달함으로써 ceria 첨가에 의한 메탄 연소 개선 효과를 확인할 수 있었으며, 이 촉매가 저온 및 중온 영역의 메탄 연소 촉매로 활용될 수 있음을 확인하였다. 그러나, 이 촉매의 경우 $1,200^{\circ}C$의 고온에서 5시간 소성한 후에는 ceria입자 크기의 증가로 인해 메탄의 연소 활성 개선 효과를 잃게됨으로 고온용 연소 촉매로서의 사용은 한계가 있음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.338-341
• /
• 2002

$(Ba_{1-x}Sr_{0.4}Ca_x)TiO_{3}$ (x=0.10, 0.15, 0.20) powders were prepared by the sol-gel method and BSCT thick films were fabricated by the screen-printing method. Their structural and dielectric properties were investigated with variation of composition ratio and $Al_{2}O_{3}$ doping contents. As results of the X-ray diffraction and microstructure analysis, the grain size of BSCT thick films was decreased with increasing $Al_{2}O_{3}$ amount. The thickness of BSCT thick films by 4-coating/drying is about $110{\sim}120{\mu}m$. The tunability increased with decreasing Ca content, and the BSCT(50/40/10) specimen doped with 1.0wt% $Al_{2}O_{3}$ showed the highest value of 12.94% at 5kV /cm.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2289-2294
• /
• 2021

In the present study, an original spark plasma sintering-reactive synthesis (SPS-RS) method for minerallike ceramic materials based on SrAl₂Si₂O₈ feldspar-like skeleton structure was used for the first time, promising solid-state matrices for reliable immobilization of high-energy ⁹⁰Sr. The method is based on the "in-situ" reaction of a mixture of SrO, Al₂O₃ and SiO₂ oxides when heated by a unipolar pulsed current under compacting pressure. The phase and elemental composition structure were studied. The dynamics of the consolidation of the reaction mixture of oxides was studied in the range of 900-1200 ℃. The study found the temperature of the high-speed (minutes) SPS-RS formation of single-phase SrAl₂Si₂O₈ composition ceramic in the absence of intermediate reaction products with a relative density of up to 99.2% and compressive strength up to 145 MPa and a strontium leaching rate of 10^-4g/cm²·day.

• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.235-240
• /
• 1994

The electric and magnetic properties of Mg1.9-2xMn0.05Fe4xO4+${\gamma}$+2wt% Al2O3, and its microstructure have been investigated as a function of ferrite composition (x=0.45, 0.5, 0.55). The microstructure turned out to be independent on the ferrite composition. The resistivity was decreased with increasing Fe contents, whereas the Curie temperature decreased. Saturation magnetization was varied from 1741 to 2022 G with composition, and squareness ratio (SR), coercive force (BHc) were decreased and increased with increasing Fe contents respectively, so the sample which SR and BHc were 0.97 Oe and 1.49 Oe can be attainable at x=0.45.

• Bulletin of the Korean Chemical Society
• /
• 제16권11호
• /
• pp.1084-1088
• /
• 1995

A complete solid solution (SrLaAl1-xNixO4) between insulating SrLaAlO4 and metallic SrLaNi(Ⅲ)O4 oxides were prepared under high oxygen pressure (1.5 kbar, 800 ℃). They have tetragonal K2NiF4-type structure in all the solid solution range. Compared with lattice parameters of the same solid solution prepared under normal condition (1 bar, 1200 ℃), large decrease in the c-parameter was induced by high pressure treatment while no noticeable variation of the a-parameter was observed. Although marked changes of structural parameters, magnetic susceptibilities, and electron paramagnetic resonance spectra were consistently occurred before and after x=0.5, overall behaviors were essentially the same with those of solid solution prepared under normal condition. Such a phenomenon is explained by assuming the formation of partially filled narrow σ*x2-y2 band for x>0.5. Lattice contraction along the c-axis by high pressure treatment seems not to broaden this band. Particularly, the continuous absorption characteristic of a high free carrier concentration for x>0.5 and the absence of Ni-O in-plane stretching mode in the infrared absorption spectra supports this picture. However, the conductivities increasing with temperature for all solid solution suggest that some localization character, of probably Anderson type, remains for x>0.5.

• 청정기술
• /
• 제18권1호
• /
• pp.95-101
• /
• 2012

수소생산을 위한 메탄의 부분산화용 촉매로 알루미나에 담지된 코발트와 니켈 촉매를 함침법으로 제조하였다. 이들 코발트와 니켈 촉매에 조촉매 성분 Mg, Ce, La와 Sr을 첨가하여 초촉매 효과를 조사하였다. 메탄의 부분산화반응을 위한 촉매의 활성은 상압, $CH_4/O_2$ = 2.0에서 450~$650^{\circ}C$의 온도영역으로 조사하였다. 촉매의 특성은 BET, XRD와 SEM/EDX를 이용하여 조사하였다. 0.2 wt%의 조촉매 성분의 첨가로 촉매성능의 상승효과를 얻을 수 있었다. $500^{\circ}C$ 이상의 온도에서는 $Co/Al_2O_3$에 Mg을 첨가한 촉매가 가장 우수한 메탄 전환율과 수소 선택성을 나타내었다. 낮은 온도 영역에서는 $Ni/Al_2O_3$에 Ce와 Sr을 첨가한 촉매가 Co계 촉매보다 우수한 반응특성을 나타내었다. $Co/Al_2O_3$와 $Ni/Al_2O_3$에 조촉매를 첨가한 경우 촉매의 표면적이 증가하는 것으로 나타났다.

• 마이크로전자및패키징학회지
• /
• 제19권2호
• /
• pp.41-45
• /
• 2012

백색 LED용 산질화물계 녹색발광 형광체를 합성하고, 광특성을 분석하였다. $SrSi_2O_{2-{\delta}}N_{2+2/3{\delta}}:Eu^{2+}$의 조성을 갖는 $SrSi_2O_2N_2:Eu^{2+}$ 경우 합성조건에 따라서 N/O비 ($\delta$)가 변하고 있었다. 수소 분위기로 $1700^{\circ}C $에서 합성된 시편이 Eu의 농도가 5 mol%일 때 $Eu^{2+}$의 $5d{\rightarrow}4f$ 전이에 의한 545 nm 근처에서의 가장 높은 녹색 발광강도를 얻을 수 있었다. $Ca_{0.5m-0.005}Yb_{0.005}Si_{12-(m+n)}Al_{m+n}O_nN_{16-n}$의 조성을 갖는 $Ca-{\alpha}-SiAlON:Yb^{2+}$는 m = 3 (n = 0.15)에서 잘 발달된 결정성과 균일한 크기를 갖는 입자를 얻을 수 있었고, 이 것이 550 nm 근처에서 가장 높은 녹색 발광을 하고 있었다.

• 한국세라믹학회지
• /
• 제41권4호
• /
• pp.340-343
• /
• 2004

SrA1$_2$O$_4$를 착체중합법으로 합성하는 과정에 있어서 결정의 성장 거동을 연구하였다. 전구체를 900∼100$0^{\circ}C$의 온도범위에서 0∼10시간동안 열처리하였으며, XRD와 TEM을 이용하여 분석하였다 Scherrer's equation을 이용하여 결정자의 크기를 측정하였으며, 그 변화양상을 관찰하였다. 결정자의 크기는 초기 급격한 증가이후 시간의 제곱근에 따라 증가하였으며, 900, 980,그리고 100$0^{\circ}C$의 온도에서 10시간 열처리 이후에 32, 45, 그리고 59nm로 성장하였다. 결정성장속도는 열처리 온도가 증가함에 따라 4.5, 9.4, 그리고 18.6nm/h$^{1}$2/이였다.