• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.312-317
• /
• 2005

Chemical composition, and mineral and heavy metal contents of Yeomsan and Baekso sun-dried salts (1-5-year-old) were determined. Moisture contents (Yeomsan, 6.07-17.02%; Baekso, 4.29-16.15%) and pH (Yeomsan, 5.92-6.31; Baekso, 5.52-6.23) decreased as age of salts increased, while NaCl contents (Yeomsan, 80.35-92.74%; Baekso, 81.06-94.58%) increased with increasing storage period of salts. Older salts had lower content of water-insoluble matters. Nitrate content was not affected by aging of salts, whereas nitrite content was lower in older salts. Sulfate content of sun-dried salt decreased with aging of salt. Average concentrations (ppm wet weight) of major minerals in Yeomsan and Baekso sun-dried salts were: Mg, Mg, 1002-119; K, 1062-3411; Ca, 1503-3437; Li, 25-101; Ge, 8.35-0.21; Si, 43.99-6.48; and Mn, 6.79-1.55. Mineral content generally decreased with salt aging. Among heavy metals, Hg was not detected in all salts, and Cd (0.02-0.04ppm) was not affected by storage period. Pb was not detected in 5-year-old salts. Older salts showed brighter color than younger ones.

• KSBB Journal
• /
• v.27 no.2
• /
• pp.97-102
• /
• 2012

In the present study, the biomass productivity of two green microalgae (Chlorella sp. and Dunaliella salina DCCBC2) were assessed in a 12 L tubular photobioreactor under optimum culture conditions. In the batch culture optimization process, the Chlorella sp. biomass was obtained as 1.2 g/L under atmospheric air as a sole $CO_2$ source and other culture conditions as follows: light intensity, temperature, pH, $NH_4Cl$ and $K_2HPO_4$ were 100 ${\mu}E/m^2/s$, $27^{\circ}C$, 7.0, 20.0 mM and 2.0 mM, respectively. On the other hand, 2.9 g/L of D. salina DCCBC2 biomass production was observed under the following conditions: light intensity, temperature, pH, $KNO_3$ and $K_2HPO_4$were 80 ${\mu}E/m^2/s$, $27^{\circ}C$, 8.0, 3.0 mM and 0.025 mM, respectively. At 1% $CO_2$ supply to the reactor, the Chlorella sp. production was reached 1.53 g/L with 25% increment under the same operating conditions. In addition, the maximum D. salina DCCBC2 biomass was observed as 3.40 g/L at 3% $CO_2$ concentration. Based on the aforementioned optimized conditions, the dilution rate and maximal biomass productivity of Chlorella sp. and D. salina DCCBC2 in the continuous cultivation were 0.4/d and 0.6 g/L/d and 0.6/d and 1.5 g/L/d, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.149-157
• /
• 1994

The conditions for formation of allophane in volcanic ash soils in Cheju Island were investigated. Soils of toposequence distributed along the sourthern slope of Mt. Halla, and the major soil groups such as dark brown soils, very dark brown soils, black soils, and brown forest soils were colleted and analyzed for Al, Fe and Si extracted with solutions of pyrophosphate and oxalate. Mean annual temperature decreased $0.8^{\circ}C$ and mean annual precipitation increased 110mm with increase elevation of 100m. Organic carbon content increased and soil pH decreased with elevation, and the formation of allophane in soils formed a climosequence. Dark brown soils widely distributed in the northern and western coastal areas, where the mean annual precipitation ranged 1,240~1,420mm and the evaporation ranged 1,290~1,320mm, contained only small amounts of allophane and Al-humus complexes. For other soils, organic carbon content, pyrophosphate extractable Al, and $Al_p/Al_o$ were inversely correlated with $pH(CaCl_2)$. Allophane content showed close relationships wlth $pH(CaCl_2)$, and inverse relationships with organic carbon content and $Al_p/Al_o$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.2
• /
• pp.123-131
• /
• 1999

To get the basic information for the improvement of the optimum levels of upland soil fertility and fertilizer application, the soil samples in two hundred fifteen site were collected from the major condiment vegetable cultivation areas such as red pepper, garlic and onion fields. Physico-chemical properties of the soil samples were investigated. Soil texture distribution of soil samples in red pepper, garlic and onion cultivation areas was in order of loam (L), sandy loam (SL), silt loam (SiL) and clay loam (CL) (35.4, 31.6, 14.9 and 7.0%, respectively). The average pH of soil in garlic and onion cultivation areas were over pH 6.0, whereas in red pepper was under pH 5.5. The frequency distribution of soil pH in total sampling sites were 58.7% in under pH 6.0 and 21.4% in below pH 5.0, in contrast to 10.3% in over pH 7.0. The organic matter contents were in the range of $20{\sim}30g\;kg^{-1}$, and the onion field soils was a little higher than those in red pepper or garlic. The available phosphate contents were in the range of $719{\sim}746mg\;kg^{-1}$ and were not different among in red pepper, garlic and onion. The frequency distribution of available phosphate in total sampling sites were found 62.8% of above $600mg\;kg^{-1}$, which was over the standard level for upland soil improvement, and then 22.3% was exceeded $1,000mg\;kg^{-1}$, especially. In the exchangeable cations, the K and Ca contents in garlic (1.27 and $9.11cmol\;kg^{-1}$) and onion (1.20 and $8.39cmol\;kg^{-1}$) were higher than in red pepper (0.96 and $5.87cmol\;kg^{-1}$), respectively. The Mg contents in garlic field soils ($2.17cmol\;kg^{-1}$) were higher than those in red pepper and onion (1.51 and $1.80cmol\;kg^{-1}$). This exchangeable K, Ca and Mg contents were higher than the standard level for upland soil improvement. The contents of microelement were ranged in $54.3{\sim}60.1mg\;kg^{-1}$ for Fe, $31.3{\sim}42.3mg\;kg^{-1}$ for Mn, $1.7{\sim}2.3mg\;kg^{-1}$ for Cu and $4.8{\sim}5.5mg\;kg^{-1}$ for Zn, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.4
• /
• pp.370-377
• /
• 1994

DC plasma torch which is a non-transferred type was constructed and silicon nitride powders were produced. Ar gas is used as a plasma gas and gas reactants with the carrier gas are introduced beneath the plasma ignition part. Two slits are attached and a reactive quenching gas is introduced through them. Using $SiCl_4 and NH_3$ as starting materials, silicon nitride powders were produced. As-produced powders were amorphous and crystalline silicon nitrides were obtained by heating at $1420^{\circ}C$ for two hours under nitrogen atmosphere. Silicon nitride phase was identified in the XRD patterns and IR spectrum, and the image of the powders before and after heating was observed from the TEM analysis.

• Journal of the Korean Ceramic Society
• /
• v.43 no.2 s.285
• /
• pp.114-120
• /
• 2006

Nano-size Au particle doped $TiO_2$ films were prepared with $Ti(OC_3H_7^i)_4$, polyvinylpyrrolidone(PVP), $HAuCl_4$ and $C_3H_7OH$ etc. by sol-gel method. $TiO_2$ gel films were obtained by the dip-coating method on the $SiO_2$ glass substrates, and then heat-treated at $700^{\circ}C$ for 10 min. The thickness of $TiO_2$ films were $0.7\~1.8\;{\mu}m$. It was found that the thickness of films prepared from PVP containing solution was about $2\~8$ times higher values than that of thin films without PVP. The size of Au particles doped in the films were about $350\~750\;nm$. Nano-size Au particle dispersed $TiO_2$ films showed high absorption peak at visible region 450nm, which made them good candidates for non-linear optical materials and photo-catalytic materials. The contact angle of $TiO_2$ film for water was $12.5^{\circ}$, and therefore it is clear that $TiO_2$ films have very high hydrophilic properties and the self-cleaning effects.

• Journal of Forest and Environmental Science
• /
• v.22 no.1
• /
• pp.13-17
• /
• 2006

Approximately each 5 kg dried Paulownia coreana leaves, seeds, outer barks, inner barks and wood were ground, extracted with acetone-$H_2O$ (7:3. v/v). concentrated under reduced pressure and successively fractionated using n-hexane. $CH_2Cl_2$, EtOAc and $H_2O$ on a separation funnel. Each fraction was then freeze dried and weighed. The extraction yield of each sample was investigated and the yield of inner barks was the highest, while the wood was the lowest. Antioxidative activities of crude extracts, precipitates and partitioned fractions were evaluated by DPPH radical scavenging method. The results indicated that all EtOAc soluble fractions, including some of $H_2O$ soluble fractions, showed significantly high antioxidative potential compared with ${\alpha}$-tocopherol and BHT used as controls.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.16-19
• /
• 2006

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR characteristic of self-assembled 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto $pre-treatment(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1 mM/1 solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a 0.1 ${\mu}M/l$ solution of 4.4'-di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2,$ and finally blown dry with N_2. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2 V to +2 V with 298 K temperature. The vacuum condition was $6{\time}10^{-8}$ Torr. As a result, we found the NDR voltage of the 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate were $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ V(positive region). respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.139-139
• /
• 2016

반도체 다마신배선용 도금용 구리도금첨가제는 대표적으로 accelerator, suppressor 및 leveler 첨가제를 사용하여 다마신 패턴을 채우고 평탄화를 시킬 수 있다. Si 반도체 공정기술에 기반한 정확한 구조분석을 통해 각각의 첨가제의 기능이 비교적 체계적으로 연구되었으며, 최근에는 유속영향을 많이 받는 것으로 알려진 leveler 첨가제에 대한 연구가 활발히 진행되고 있다. 본 연구는 대표적 leveler 첨가제의 하나인 Janus Green B(JGB, $C_{30}H_{31}ClN_6$)를 0 ~ 1 mM을 첨가하여 Si 기판위에 증착된 Cu 씨드층 상의 도금후 표면상태 및 불순물의 농도를 분석하고, 이 박막층들의 결정립 성장 경향성을 electron backscattered diffraction(EBSD) 분석을 통해 진행하였다. C, H, N 등의 불순물이 JGB 농도와 선형적 관계를 가지고 증가하는 것을 알 수 있었으며, S와 O의 불순물도 JGB 농도 증가에 따라 증가하는 것을 알 수 있었다. 또한 0.1 mM 첨가한 경우에 60% 정도 결정립 성장이 진행된 것을 알 수 있었으며, 0.2 mM을 넣은 경우에는 결정립 성장이 일어나지 않은 것을 알 수 있었다. 흥미로운 점은 4 point probe를 통한 면저항 측정을 통해 EBSD를 통한 결정립성장이 관찰되지 않은 0.2 mM JGB를 첨가한 경우에 대해서도 면저항의 감소가 관찰되며, 오히려 JGB 농도가 높을수록 이러한 면저항의 감소가 빠르게 시작되는 것을 관찰할 수 있었다. 이는 JGB 농도 증가에 따라 박막층의 불순물의 농도가 증가하고 막내에 존재하는 불순물의 농도가 증가하면 내부응력장이 커짐으로 인해 더욱 빠른 속도로 불순물의 재배치가 일어난 것으로 보인다. 이러한 불순물이 결정립계면에 편석되는 경우에 pinning을 통해 결정립계면의 이동을 저하시킬 수 있으므로 결정립의 성장 억제가 가능해진 것으로 판단된다.

• Journal of Korean Society for Quality Management
• /
• v.16 no.1
• /
• pp.43-48
• /
• 1988

Most of silicone used for water repellent finish is MHP (methyl hydrodiene polysiloxane), which is formed by hydrolysis and condensation polymerization of MHD (methyl hydrodiene dichlorosilane: Me H Si $Cl_2$). The cross-linking theory explains the water repellent mechanism of MHP. The silicone finish on fiber could improve in handle, softness, abrasion resistance, soil repellency, tear strength and crease resistance, as well as water repellency. According to using method silicone-water repellent finishing agents, could be devided into air dry type and curing type. MHP is the typical curing type of water repellent finishing agent, and this type requires the curing temperature above $150^{\circ}C$ at least. High curing temperature is the very drawback of this curing type. For this reason, there has been global interest in the lowering of its temperature. The objective of this study is to investigate merits of alkali treatment for silicone finishing by ANOVA and LSD (least significant difference).