• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.117-123
• /
• 2004

A 30 nm $In_{0.7}GaAs$ High Electron Mobility Transistor (HEMT) with triple-gate has been successfully fabricated using the $SiO_2/SiN_x$ sidewall process and BCB planarization. The sidewall gate process was used to obtain finer lines, and the width of the initial line could be lessened to half by this process. To fill the Schottky metal effectively to a narrow gate line after applying the developed sidewall process, the sputtered tungsten (W) metal was utilized instead of conventional e-beam evaporated metal. To reduce the parasitic capacitance through dielectric layers and the gate metal resistance ($R_g$), the etchedback BCB with a low dielectric constant was used as the supporting layer of a wide gate head, which also offered extremely low Rg of 1.7 Ohm for a total gate width ($W_g$) of 2x100m. The fabricated 30nm $In_{0.7}GaAs$ HEMTs showed $V_{th}$of -0.4V, $G_{m,max}$ of 1.7S/mm, and $f_T$ of 421GHz. These results indicate that InGaAs nano-HEMT with excellent device performance could be successfully fabricated through a reproducible and damage-free sidewall process without the aid of state-of-the-art lithography equipment. We also believe that the developed process will be directly applicable to the fabrication of deep sub-50nm InGaAs HEMTs if the initial line length can be reduced to below 50nm order.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.37-42
• /
• 2024

This paper suggests polynomial time algorithm for cutwidth minimization problem that classified as NP-complete because the polynomial time algorithm to find the optimal solution has been unknown yet. To find the minimum cutwidth CW_f(G)=max_𝜈∈_VCW_f(𝜈)for given graph G=(V,E),m=｜V｜, n=｜E｜, the proposed algorithm divides neighborhood N_G[𝜈_i] of the maximum degree vertex 𝜈_i in graph G into left and right and decides the vertical cut plane with minimum number of edges pass through the vertex 𝜈_i firstly. Then, we split the left and right N_G[𝜈_i] into horizontal sections with minimum pass through edges. Secondly, the inner-section vertices are connected into line graph and the inter-section lines are connected by one line layout. Finally, we perform the optimization process in order to obtain the minimum cutwidth using vertex moving method. Though the proposed algorithm requires O(n²) time complexity, that can be obtains the optimal solutions for all of various experimental data

• The Journal of Korean Medicine
• /
• v.24 no.2
• /
• pp.159-165
• /
• 2003

Objectives : Coptidis rhizoma (CR) is an oriental medicine that has been used in many traditional prescriptions against diabetes mellitus in Korea for centuries. Our purpose was to determine the protective effect and its action mechanism of CR on the cytotoxicity of pancreatic -cell line (RINm5F cell). Methods : In this experiment, we used methods such as MTT assay for detection of cytotoxicity, DNA fragmentation assay for detection of apoptotic cell death, LDH activity assay for detection of necrotic cell death, and measurement of $DiOC_{6}$ (3) retention for detection of mitochondrial membrane potential (MMP). Background : Nitric oxide (NO) is believed to playa key role in the process of pancreatic -cell destruction leading to insulin-dependent diabetes mellitus (IDDM). Results : Exposure of RINm5F cells to chemical NO donor such as S-nitroso-N-acetylpenicillamine (SNAP) induced cytotoxic events such as DNA fragmentation and lactate dehydrogenase (LDH) release into medium. However, pretreatment of RINm5F cells with CR extract ($10~50{\mu\textrm{g}}/ml$) for 3 hours prevented SNAP-induced DNA fragmentation and LDH release into medium through the inhibition of MMP disruption. Conclusions : These results suggest that CR may be a candidate for a therapeutic or preventing agent against IDDM.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.3
• /
• pp.1-8
• /
• 2016

The printed circuit board (PCB) can be used only 2 layers of front and back. Therefore, the wiring line segments are located in 2 layers without crossing each other. In this case, the line segment can be appear in both layers and this line segment is to resolve the crossing problem go through the via. The via minimization problem (VMP) has minimum number of via in layout design problem. The VMP is classified by NP-complete because of the polynomial time algorithm to solve the optimal solution has been unknown yet. This paper suggests polynomial time algorithm that can be solve the optimal solution of VMP. This algorithm transforms n-line segments into vertices, and p-crossing into edges of a graph. Then this graph is partitioned into 3-coloring sets of each vertex in each set independent each other. For 3-coloring sets $C_i$, (i=1,2,3), the $C_1$ is assigned to front F, $C_2$ is back B, and $C_3$ is B-F and connected with via. For the various experimental data, though this algorithm can be require O(np) polynomial time, we obtain the optimal solution for all of data.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.1
• /
• pp.49-57
• /
• 2019

Objective: The first stage in both breeding and programs for the conservation of genetic resources are the identification of genetic diversity in the relevant population. The aim of the present study is to identify genetic diversity of six brown layer pure chicken lines (Rhode Island Red [RIRI, RIRII], Barred Rock [BARI, BARII], Columbian Rock [COL], and line 54 [L-54]) with microsatellite markers. Furthermore, the study aims to employ its findings to discuss the possibilities for the conservation and sustainable use of these lines that have been bred as closed populations for a long time. Methods: In the present study, a total number of 180 samples belonging to RIRI (n = 30), RIRII (n = 30), BARI (n = 30), BARII (n = 30), L-54 (n = 30), and COL (n = 30) lines were genotyped using 22 microsatellite loci. Microsatellite markers are extremely useful tools in the identification of genetic diversity since they are distributed throughout the eukaryotic genome in multitudes, demonstrate co-dominant inheritance and they feature a high rate of polymorphism and repeatability. Results: In this study, we found all loci to be polymorphic and identified the average number of alleles per locus to be in the range between 4.41 (BARI) and 5.45 (RIRI); the observed heterozygosity to be in the range between 0.31 (RIRII) and 0.50 (BARII); and $F_{IS}$ (inbreeding coefficient) values in the range between 0.16 (L-54) and 0.46 (RIRII). The $F_{IS}$ values obtained in this context points out to a deviation from Hardy-Weinberg equilibrium due to heterozygote deficiency in six different populations. The Neighbour-Joining tree, Factorial Correspondence Analysis and STRUCTURE clustering analyzes showed that six brown layer lines were separated according to their genetic origins. Conclusion: The results obtained from the study indicate a medium level of genetic diversity, high level inbreeding in chicken lines and high level genetic differentiation between chicken lines.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1582-1582
• /
• 2000

Rayleigh scattering and laser induced predissociative fluorescence are employed for capturing two-dimensional images of temperature and species concentration in a laminar nonpremixed flame of a diluted hydrogen jet. Rayleigh scattering cross-sections are experimentally obtained at 248nm. Dispersed LIPF spectra of OH and O₂ are also measured in a flame in order to confirm the excitation of single vibronic state of OH and O₂are excited on the P₁(8) line of the A ²∑+ (v＇=3) - X ²∏(v˝=0) band and R(17) line of the Schumann-Runge band B ³∑u- (v＇=0) - X ³∑g-∏(v˝=6), respectively. Fluorescence spectra of OH and Hot O₂ are captured and two-dimensional images of the hydrogen flame field are successfully visualized.

• Bulletin of the Korean Mathematical Society
• /
• v.59 no.1
• /
• pp.119-139
• /
• 2022

This paper deals with the λ-labeling and L(2, 1)-coloring of simple graphs. A λ-labeling of a graph G is any labeling of the vertices of G with different labels such that any two adjacent vertices receive labels which differ at least two. Also an L(2, 1)-coloring of G is any labeling of the vertices of G such that any two adjacent vertices receive labels which differ at least two and any two vertices with distance two receive distinct labels. Assume that a partial λ-labeling f is given in a graph G. A general question is whether f can be extended to a λ-labeling of G. We show that the extension is feasible if and only if a Hamiltonian path consistent with some distance constraints exists in the complement of G. Then we consider line graph of bipartite multigraphs and determine the minimum number of labels in L(2, 1)-coloring and λ-labeling of these graphs. In fact we obtain easily computable formulas for the path covering number and the maximum path of the complement of these graphs. We obtain a polynomial time algorithm which generates all Hamiltonian paths in the related graphs. A special case is the Cartesian product graph K_n☐K_n and the generation of λ-squares.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.50-55
• /
• 2008

In this paper, multi-band internal antenna which can adjust both resonant frequency and input impedance of antenna as using lumped inductor between shoring plate and ground plane is proposed. The structure of proposed antenna consists of PIFA (Planar Inverted F Antenna) structure and half-wavelength loaded line structure and has two shorting plates and one feeding plate. One shorting plate is shared. The operating frequency bands of designed antenna are GSM, GPS in the PIFA structure and DCS, US-PCS, W-CDMA in half-wave loaded line structure as varying the inductor value in 2.2nH, 3.3nH, and 4.7nH. As varying the inductor value in the shared shorting plate, input impedance of antenna is varied. To minimize the gain variation of antenna as adding lumped element, the inductor value is restricted at maximum of 6.8nH. The maximum gain of proposed antenna is measured as -1.60dBi in the GSM band, -1.16dBi in the GPS band, and 1.41dBi in the DCS/US-PCS/W-CDMA band.

• Journal of The Korean Astronomical Society
• /
• v.43 no.3
• /
• pp.65-74
• /
• 2010

We investigate ${\rho}$ Pup using the high resolution spectral observations taken from the VLT archive and observations at a 1.8m-Korean telescope with BOES spectrograph. The atmospheric parameters are determined using the iron-line abundance analysis. We derive an effective temperature value of $T_{eff}=6890{\pm}250K$, surface gravity of log g=$3.28{\pm}0.3$ dex, microturbulent velocity of ${\upsilon}_{micro}=4.1{\pm}0.4km\;s^{-1}$, and the iron abundance of log N=$7.82{\pm}0.15$. The projected rotational velocity of the star is close to ${\upsilon}$ sin i=3.5km $s^{-1}$. Asymmetric line profiles in the observed spectra and variation of this asymmetry with time show that both strong radial pulsation and weak non-radial pulsations are present in ${\rho}$ Pup.

• Korean Journal Plant Pathology
• /
• v.14 no.3
• /
• pp.212-216
• /
• 1998

Capsicum pepper selections fro PI163192, PI241670, PI244670, PI271322, PI308787, PI322719, and PI369994 were confirmed to be non-hypersensitively resistant to race 3 of Xanthomonas campestris pv. vesicatoria. A resistant cultivar,‘SR’, was shown to be hypersensitive. Four Koran local cultivars, a cytoplasmic male sterile line (A-line) and its maintainer (B-line) were highly susceptible. The resistant selections and cultivars were crossed with a male sterile A-line (Smsms) and fertility of their F1 hybrids was examined by observing he pollen production, testing pollen germination, and quantifying the amount of pollen produced per anther to identify the genotype interacting with the male sterile cytoplasm. The seven resistant PI selections turned out to be restorers (N(S)MsMs) and‘SR’to be a maintainer (Nmsms).