• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권2호
• /
• pp.109-118
• /
• 2008

We present a new version of the first return time test for pseudorandomness. Let $R_n$ be the first return time of initial n-block with overlapping. An algorithm to calculate the probability distribution of the first return time $R_n$ for each starting block is presented and used to test pseudorandom number generators. The standard Z-test for log $R_n$ is applied to test the pseudorandom number generators.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.96-97
• /
• 2012

In nitride and oxide film deposition, sputtered metals react with nitrogen or oxygen gas in a vacuum chamber to form metal nitride or oxide films on a substrate. The physical properties of sputtered films (metals, oxides, and nitrides) are strongly influenced by magnetron plasma density during the deposition process. Typical target power densities on the magnetron during the deposition process are ~ (5-30) W/cm2, which gives a relatively low plasma density. The main challenge in reactive sputtering is the ability to generate a stable, arc free discharge at high plasma densities. Arcs occur due to formation of an insulating layer on the target surface caused by the re-deposition effect. One current method of generating an arc free discharge is to use the commercially available Pinnacle Plus+ Pulsed DC plasma generator manufactured by Advanced Energy Inc. This plasma generator uses a positive voltage pulse between negative pulses to attract electrons and discharge the target surface, thus preventing arc formation. However, this method can only generate low density plasma and therefore cannot allow full control of film properties. Also, after long runs ~ (1-3) hours, depends on duty cycle the stability of the reactive process is reduced due to increased probability of arc formation. Between 1995 and 1999, a new way of magnetron sputtering called HIPIMS (highly ionized pulse impulse magnetron sputtering) was developed. The main idea of this approach is to apply short ${\sim}(50-100){\mu}s$ high power pulses with a target power densities during the pulse between ~ (1-3) kW/cm2. These high power pulses generate high-density magnetron plasma that can significantly improve and control film properties. From the beginning, HIPIMS method has been applied to reactive sputtering processes for deposition of conductive and nonconductive films. However, commercially available HIPIMS plasma generators have not been able to create a stable, arc-free discharge in most reactive magnetron sputtering processes. HIPIMS plasma generators have been successfully used in reactive sputtering of nitrides for hard coating applications and for Al2O3 films. But until now there has been no HIPIMS data presented on reactive sputtering in cluster tools for semiconductors and MEMs applications. In this presentation, a new method of generating an arc free discharge for reactive HIPIMS using the new Cyprium plasma generator from Zpulser LLC will be introduced. Data (or evidence) will be presented showing that arc formation in reactive HIPIMS can be controlled without applying a positive voltage pulse between high power pulses. Arc-free reactive HIPIMS processes for sputtering AlN, TiO2, TiN and Si3N4 on the Applied Materials ENDURA 200 mm cluster tool will be presented. A direct comparison of the properties of films sputtered with the Advanced Energy Pinnacle Plus + plasma generator and the Zpulser Cyprium plasma generator will be presented.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권2호
• /
• pp.146-152
• /
• 2014

선형발전기와 연성된 원통형 부이의 수직운동으로부터 파랑에너지를 추출하는 파력발전장치의 설계과정을 소개하였다. 최대 파워는 최적조건($c_{PTO}=b_T$, ${\omega}={\omega}_N$)에서 발생하며, 공진조건시 부이의 수직운동 고유주파수와 속도스펙트럼의 피크 주파수를 일치시키지 않고 의도적으로 고유주파수를 15% 크게 설정하면 추출파워의 최대값을 더욱 높일 수 있다. 이러한 방법을 통하여 추출 파워의 증가와 함께 부이의 흘수를 낮추고 동시에 PTO 감쇠력을 줄일 수 있기 때문에 발전장치 제작 비용을 낮출 수 있는 부수적인 효과를 얻을 수 있었다.

• 정보처리학회논문지C
• /
• 제12C권2호
• /
• pp.281-288
• /
• 2005

최근의 컴퓨터 네트워크에서 teletraffic의 양상은 Poisson 프로세스보다 self-similar 프로세스에 의해서 더 잘 반영된다. 이는 컴퓨터 네트워크의 teletraffic에 관련하여 self-similar한 성질을 고려하지 않는다면, 컴퓨터 네트워크의 성능에 관한 결과는 부정확 할 수밖에 없다는 의미가 된다. 따라서, 통신 네트워크에 관한 시뮬레이션을 수행하기 위한 매우 중요한 요소 중에 하나는 충분히 긴 self-similar한 sequence를 얼마나 잘 생성하느냐의 문제이다. 본 논문에서는 SRA (successive random addition) 방법을 이용한 pseudo-random self-similar sequence 생성기를 구현 및 분석하였다. 본 pseudo-random self-similar sequence 생성기의 성질을 매우 긴 sequence를 생성하는데 요구되는 통계적인 정확도와 생성시간에 대해서 분석하였다. 본 논문에서 제안한 SRA 방법을 이용한 pseudo-random self-similar sequence 생성기의 성능은 Hurst 변수의 상대적인 정확도로 보았을 때, 그리고 sequence의 생성시간을 고려했을 때에 적합함을 보였다. 이 생성기의 이론적 complexity는 n개의 난수를 발생하는데 O(n)이 요구된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.253-256
• /
• 2009

본 논문에서는 OFDM 기반의 통신 시스템용 FFT/IFFT 코어 생성기(FFT_Core_Gen)를 구현하였다. FFT_Core_Gen은 $N=64{\times}2^k$($0{\leq}k{\leq}7$)의 8가지 FFT/IFFT 코어의 Verilog-HDL 코드를 생성한다. 생성되는 FFT/IFFT 코어는 in-place 방식의 단일 메모리 구조를 기반으로 하며, FFT 길이에 따라 radix-4와 radix-2 DIF 알고리듬의 혼합 구조가 적용된다. 또한, 메모리 감소와 연산 정밀도 향상을 위하여 중간 결과값의 크기에 따른 조건적 스케일링이 연산 stage 단위로 적용되도록 하였으며, 내부 데이터와 격자계수는 각각 14비트를 사용한다. FFT_Core_Gen에서 생성되는 FFT/IFFT 코어의 연산 정밀도는 최소 58-dB (N=8,192)에서부터 최대 63-dB (N=64)의 SQNR을 갖는다. 생성되는 코어를 $0.35-{\mu}m$ CMOS 표준 셀로 합성한 결과 75-MHz@3.3-V의 속도로 동작 가능하여 64점 FFT 연산에 $2.55-{\mu}s$가 소요되고, 8192점 FFT 연산에 $762.7-{\mu}s$가 소요되어 OFDM 기반의 무선 랜, DMB, DVB 시스템의 요구조건을 만족한다.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.517-524
• /
• 2023

BaTiO₃-Poly vinylidene fluoride (PVDF) solution was prepared by adding 0~25 wt% BaTiO₃ nanopowder and 10 wt% PVDF powder in solvent. BaTiO₃-PVDF film was fabricated by spreading the solution on a glass with a doctor blade. The output performance increased with increasing BaTiO₃ concentration. When the BaTiO₃ concentration was 20 wt%, the output voltage and current were 4.98 V and 1.03 ㎂ at an applied force of 100 N. However, they decreased when the over 20 wt% BaTiO₃ powder was added, due to the aggregation of particles. To enhance the output performance, the generator was poled with an electric field of 150~250 kV/cm at 100 ℃ for 12 h. The output performance increased with increasing electric field. The output voltage and current were 7.87 V and 2.5 ㎂ when poled with a 200 kV/cm electric field. This result seems likely to be caused by the c-axis alignment of the BaTiO₃ after poling treatment. XRD patterns of the poled BaTiO₃-PVDF films showed that the intensity of the (002) peak increased under high electric field. However, when the generator was poled with 250 kV/cm, the output performance of the generator degraded due to breakdown of the BaTiO₃-PVDF film. When the generator was matched with 800 Ω resistance, the power density of the generator reached 1.74 mW/m². The generator was able to charge a 10 ㎌ capacitor up to 1.11 V and turn on 10 red LEDs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.61-64
• /
• 2000

There are many methods of generating PN sequences. In this paper, we propose and examine a new class of composite shift register to generate PN sequences. The new composite generator, in comparison with the original LFSR which generates PN codes of period 2$^n$-1, when coupled with codes of period k, generates PN codes with (longer) period LCM(2$^n$-1,k).

• 환경위생공학
• /
• 제15권3호
• /
• pp.70-74
• /
• 2000

The technology of malodorous substances treatment was classified physical separation and chemical destruction. This study was carried out to investigate the characteristics of malodorous substances treatment with the change of operating conditions from the ozone generator. The major results of this study were as follows : Removal efficiency by additive ozone rate was measured $NH_3$:95%(ozone additive rate : 2), $H_2S$ : 97%(ozone additive rate:4), $CH_3SH$ : 96%(ozone additive rate : 3), $(CH_3)_2S_2$ : 97%(ozone additive rate:5), $(CH_3)_3N$ : 95%(ozone additive rate : 1), $CH_3CHO$ : 95%(ozone additive rate : 2), $C_6H_5CHCH_2$ : 95%(ozone additive rate : 2).

• Annals of Clinical Neurophysiology
• /
• 제1권2호
• /
• pp.106-111
• /
• 1999

Backgroud : The generators of N37 and P37 of posterior tibial nerve somatosensory evoked potential(PTSEP) have not been exactly known. Recently, some reports suggested that P37 and N37 might have different generator. We conducted a study to know the generators of P37 and N37 of PTSEP using gating mechanism. Methods : We evaluated subcortical and cortical somatosensoy evoked potentials(SEPs) in response to posterior tibial nerve stimulation in 3 experimental conditions of foot movement and compared them with PTSEPs in full relaxation of foot. The experimental conditions were: (a) active flexion-extention of stimulated foot, (b) isometric contraction of the stimulated foot, (c) passive flexion-extention of the stimulate foot. We analyzed the latencies and amplitudes of following potentials; P30, N37, P37, and N50. Results : The amplitude of P30 potential did not change during at any paradigms. The amplitudes of P37 and N50 were significantly attenuated in all condition. However, the amplitude of N37 showed no significant change during at any paradigms. Conclusions : These results suggest that the generators of P37 and N37 of PTSEP be different in cortex.

• Journal of applied mathematics & informatics
• /
• 제36권5_6호
• /
• pp.359-368
• /
• 2018

In this paper, we investigate quasi-cyclic codes over the ring $R={\mathbb{F}}_2+v{\mathbb{F}}_2$, where $v^2=v$. We investigate the structure of generators for one-generator quasi-cyclic codes over R and their minimal spanning sets. Moreover, we find the rank and a lower bound on minimum distances of free quasi-cyclic codes over R. Further, we find a relationship between cyclic codes over a different ring and quasi-cyclic codes of index 2 over R.