• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.391-396
• /
• 2007

The three-dimensional structure of an inorganic crystal, CaMoO4 (space group I 41/a, a = 5.198(69) A and c = 11.458(41) A), was determined by electron crystallography utilizing a high voltage electron microscope. An initial structure of CaMoO4 was determined with 3-D electron diffraction patterns. This structure was refined by crystallographic image processing of high resolution TEM images. X-ray crystallography of the same material was performed to evaluate the accuracy of the TEM structure determination. The cell parameters of CaMoO4 determined by electron crystallography coincide with the X-ray crystallography result to within 0.033-0.040 A, while the atomic coordinates were determined to within 0.072 A.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.86-87
• /
• 2002

Fe과 Mo이 교대로 정렬해 있는 이중 페로브스카이트 구조를 갖는 $A_{2-x}$FeMo $O_{6}$(A=Ca, Sr, Ba) 화합물들은 망간 산화물들에 비해 높은 $T_{c}$ (310-420K)의 준강자성 상태를 갖는다.$^{1.3}$ 이 화합물들은 F $e^{3+}$ (S=5/2) 와 M $o^{5+}$(S=1/2) 스핀들 사이의 커다란 반강자성 상호작용으로 이론적으로 4$\mu$$_{B}$/f.u.의 $M_{s}$ 값을 갖는다. A-site의 평균 이온 반경( $r_{A}$)이 증가함에 따라 이 화합물들의 결정구조는 Monoclinic(A=Ca)에서 Tetragonal(Sr)과 Cubic(Ba)으로 점진적으로 변화한다.$^3$(중략)(중략)략)략)

• Journal of Sensor Science and Technology
• /
• v.17 no.3
• /
• pp.203-209
• /
• 2008

Thick film formaldehyde (HCHO) gas sensors were fabricated by using $La_1_{-x}Sr_xMO_3$ (M= Fe, Co, Mn) ceramics. The powders of $La_1_{-x}Sr_xMO_3$ (M=Fe, Co, Mn) were synthesized by conventional solid-state reaction method. By using the $La_1_{-x}Sr_xMO_3$ (M=Fe, Co, Mn) paste, the thick-film formaldehyde sensors were prepared on the alumina substrate by silkscreen printing method. The experimental results revealed that $La_1_{-x}Sr_xMO_3$ (M= Fe, Co, Mn) ceramic powder has a perovskite structure and the thick-film sensor shows excellent gas-sensing characteristics to formaldehyde gas (sensitivity of $La_{0.8}Sr_{0.2}FeO_3$, S= 14.7 at operating temperature of $150^{\circ}C$ in 50 ppm HCHO ambient).

• Nano
• /
• v.13 no.10
• /
• pp.1850115.1-1850115.10
• /
• 2018

A novel sensor material of Au nanoparticles (NPs) functionalized 1D ${\alpha}-MoO_3$ nanobelts (NBs) was fabricated by a facile lysine-assisted approach. The obtained $Au/{\alpha}-MoO_3$ product was characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and energy dispersive X-ray (EDX), and X-ray photoelectron spectra (XPS). Then, in order to investigate the gas sensing performances of our samples, a comparative gas sensing study was carried out on both the ${\alpha}-MoO_3$ NBs before and after Au NPs decoration by using ethanol vapor as the molecular probe. The results turned out that, after the functionalization of Au NPs, the sensor exhibited improved gas-sensing characteristics than the pure ${\alpha}-MoO_3$, such as response and recovery time, optimal operating temperature (OT) and excellent selectivity. Take for example 200 ppm of ethanol, the response/recovery times were 34 s/43 s and 5.7 s/10.5 s, respectively, while the optimal operating temperature (OT) was lower to $200^{\circ}C$ rather than $250^{\circ}C$. Besides, the functionalized sensor showed a higher response to ethanol at $200^{\circ}C$, and response was 1.6 times higher than the pure $MoO_3$. The mechanism of such improved sensing properties was interpreted, which might be attributed to the spillover effect of Au NPs and the electronic metal-support interaction.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.109-113
• /
• 1997

When the intensity of X-rays scattered from amorphous materials (very weakly absorbing materials) is measured using standard diffractometric technique, the intensity caused by multiple scattering is obtained in the measured X-ray intensity. Computer programs have been developed to estimate the intensity of the mul-tiple scattering obtained in vitreous SiO2 and B2O3 with various X-rays. Using the above computer program, the intensity ratios of multiple scattering to single scattering in vitreous SiO2 were 0.10~0.16% at CuK$\alpha$, 0.98~5.87% at MoK$\alpha$, and 1.88~17.86% at AgK$\alpha$ in the range of 2$\theta$=0~180$^{\circ}$. Therefore, pri-or to the structural analysis of vitreous SiO2 and B2O3 performed experimentally using X-ray diffractometric technique, the intensity data measured in MoK$\alpha$ and AgK$\alpha$ radiations must be corrected for multiple scattering effect.

• Korean Journal of Materials Research
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2022

In this investigation, Bi₂MoO₆ deposited graphene nanocomposite (BMG) was synthesized using a simple microwave assisted hydrothermal synthesis method. The synthesized BMG nanocomposite was characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy with energy dispersive X-ray analysis, and photocurrent analysis. The study revealed that the catalysts prepared have high crystalline nature, enhanced light responsive property, high catalytic activity, and good stability. XRD results of BMG composite exhibit a koechlinite phase of Bi₂MoO₆. The surface property is shown by SEM and TEM, which confirmed a homogenous composition in the bulk particles of Bi₂MoO₆ and nanosheets of graphene. The catalytic behavior was investigated by the decomposition of Rhodamine B as a standard dye. The results exhibit excellent yields of product derivatives at mild conditions under ultrasonic/visible light-medium. Approximately 1.6-times-enhanced sono-photocatalytic activity was observed by introduction of Bi₂MoO₆ on graphene nanosheet compared with control sample P25 during 50 min test.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.535-536
• /
• 2013

본 연구에서는 DC/RF co-sputtering공법을 통해 제작한 In-Mo-O 투명 Mo doping 농도 및 열처리 온도에 따른 전기적, 광학적, 구조적 특성을 분석하고, 최적화된 In-Mo-O 투명전극을 유기태양전지(OPVs)와 유기발광다이오드(OLED)에 적용하여 그 가능성을 평가하였다. Mo doping 농도는 co-sputtering 공정 중 MoO3에 인가되는 radio-frequency (RF) power를 변화시켜 조절되었으며, 투명전극의 광학적 특성 및 전기적 특성 향상을 위해 성막 공정 후 급속 열처리 공정을 온도 별로 진행하였다. In-Mo-O 투명 전극은 Mo 도핑 농도에 영향을 받음을 확인할 수 있었고, 최적화된 Mo doping 파워에서 성막한 In-Mo-O 박막은 급속 열처리 공정 후 면저항 24.57 Ohm/square, 투과도 81.57% (400~1,200 nm wavelength)를 나타내었다. Bulk hetero-junction 기반의 고효율 유기태양전지와 유기발광다이오드 적용하기 위해 본 연구에서 제작된 IMO 투명전극의 구조적 특성, 결정성 및 표면특성은 x-ray diffraction (XRD), atomic force microscopy(AFM), field effect scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HRTEM) 분석을 통해 진행하였다. In-Mo-O 투명 전극상에 제작된 OLEDs와 OPV는 reference ITO 전극에 제작된 OLEDs/OPV와 비교할 때 유사하거나 향상된 특성을 나타내었으며 이는 In-Mo-O 박막이 OLED/OPV용 투명 전극으로 적용이 가능함을 말해준다.

• Journal of the Korean Chemical Society
• /
• v.56 no.2
• /
• pp.217-227
• /
• 2012

Syntheses of some novel oxomolybdenum(V) and dioxomolybdenum(VI) complexes with an azo dye methoxyphenolazoantipyrine (HL) derived from 4-aminoantipyrine and 2-methoxyphenol are reported. The complexes have been characterized by elemental analyses, molar conductance, magnetic susceptibility data, IR, UV-Vis, $^1H$ NMR, EPR and FAB mass spectral studies. The physicochemical studies and spectral data indicate that HL acts as a bidentate chelating ligand. The complexes have the general formulae [$MoO(HL)XCl_2$] and [$MoO_2(HL)XCl$],where X=Cl, NCS or $NO_3$. All the complexes are found to have distorted octahedral geometry. Structural and morphological characterization of the complexes [$MoO(HL)Cl_3$](1) and [$MoO_2(HL)Cl_2$](4) before and after gamma ray irradiation,was performed by X-ray diffraction and scanning electron microscopy( SEM).The ligand and the complexes were screened for their possible antimicrobial activities.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.10
• /
• pp.1082-1085
• /
• 1997

The Near-Edge X-ray Absorption Fine Structure (NEXAFS) technique and Differential Scanning Calorimetry (DSC) were utilized to investigate the reaction of CH4 and O2 on the MoO3/SiO2 catalyst. The NEXAFS results showed that the stoichiometry of the molybdenum oxide catalyst supported on silica was MoO3. MoO3 was reduced to MoO2 when the catalyst was exposed to CH4 at 773 K. NEXAFS results confirm that lattice oxygen is directly related to the process of CH4 oxidation which takes place on the surface of MoO3/SiO2 catalysts. DSC results show that the structure of MoO3 changes around 573 K and this structural change seems to improve the migration of oxygen in the lattice.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.236-241
• /
• 2004

New electrolytes of cubic L $a_2$M $o_2$-x Nbx $O_{9-}$$\delta$/(x=0, 0.05, 0.1, 0.2) were fabricated by a solid-state reaction method and their sintered densities were approximately 93％ of theoretical density. X-ray diffraction analysis and microstructure observation for the sintered specimens were performed. The at complex impedance were measured at 34$0^{\circ}C$ to 93$0^{\circ}C$ in air and fitted with a Solatron ZView program. Their impedance spectra showed big difference below and over the phase transition temperature (58$0^{\circ}C$). The electrical conductivity of L $a_2$M $o_2$ $O_{9}$ was 1.36${\times}$10$^{-2}$ S$cm^{-1}$ / at 817$^{\circ}C$. Comparing to undoped L $a_2$M $o_2$ $O_{9}$ , Nb-doped specimen showed the increase of electrical conductivity due to the aliovalent doping effect..