• 한국토양비료학회지
• /
• 제32권2호
• /
• pp.123-131
• /
• 1999

우리나라의 주요 조미채소인 고추, 마늘 및 양파 주산지 토양의 물리화학적 특성 및 화학성분함량을 조사하여 토양관리 및 시비 기준설정의 기초자료로 활용하기 위하여 고추(132개지점), 마늘(59개지점) 및 양파(24개지점) 주산지 총 215개 지점의 근권토양을 채취하여 분석하였다. 우리나라 고추, 마늘 및 양파 주산지 토양은 사양토(SL)와 양토(L)가 전체의 68% 이상을 차지하였으며, 토성별 빈도분포는 양토(L. 35.4%) > 사양토(SL,31.6%) > 미사질양토(SiL, 14.9%) > 식양토(CL.7.0%)의 순이었다. 토양 pH는 마늘 및 양파재배지 토양은 평균 6.0 이상이었으나 고추재배지 토양은 5.5로서 낮았으며, 전체조사지역의 58.7%인 126개 지점이 6.0 이하였으며, pH 5.0 이하인 지점도 전체의 21.4%인 46개 지점이었으며, 7.1 이상인 지역은 약 10.3%인 22개 지점이었다. 토양유기물 함량은 전반적으로 $20{\sim}30g\;kg^{-1}$ 수준이H으며 양파재배지 토양에서 다소 높게 나타났다. 유효 $P_2O_5$는 $719{\sim}746mg\;kg^{-1}$ 범위로서 작물간에 큰 차이는 없었으며, 빈도분포는 전체 조사지역중 62.8%가 유효 $P_2O_5$ $600mg\;kg^{-1}$ 이상으로서 기준치를 초과하였으며 $1,000mg\;kg^{-1}$ 이상도 전체의 22.3%를 차지하였다. 치환성 양이온인 K 및 Ca 함량은 마늘(1.27 및 $9.11cmol\;kg^{-1}$) 및 양파(1.20 및 $8.39cmol\;kg^{-1}$)재배지토양이 고추재배지 토양(0.96 및 $5.87cmol\;kg^{-1}$)에 비하여 높았으며, Mg 함량은 마늘재배지 토양이 $2.17cmol\;kg^{-1}$으로서 가장 높았으며, 고추 및 양파재배지토양은 각각 약 1.51 및 $1.80cmol\;kg^{-1}$으로 마늘재배지 토양에 비하여 낮게 나타났으나 치환성 양이온인K, Mg 및 Ca모두 경작지 토양의 적정수준 이상으로 함유되어 있었다. 그리고 미량원소는 Fe는 $54.3{\sim}60.1mg\;kg^{-1}$ 범위, Mn은 $31.3{\sim}42.3mg\;kg^{-1}$ 범위 Cu및 Zn은 각각 1.7~2.3 및 $4.8{\sim}5.5mg\;kg^{-1}$ 범위였다.

• 대한치과보철학회지
• /
• 제36권1호
• /
• pp.166-182
• /
• 1998

The purposes of this study are to evaluate the Korean mandibular dental arch and classify the mandibular dental arch shape and size based on the incisal angle, canine angle, inter second molar width and height. In this study the mandibular study models were fabricated using irreversible hydrocolloid impression material from 225 volunteers with a mean age 23.62 (range 19-29). And the study models were measured with 3-dimensional measuring device and the mandibular dental arch was classified by means of K-means clustering method and visual inspection, then obtained data were analyzed with t-test for the statistical analysis. The results were as follows ; 1. The average canine height was 5.19mm(s.d. 1.17) in both sex, 5.34mm in male, and 4.95mnm in female. And the sexual difference was significant($0). 2. The average second molar height was 39.81mm(s.d. 2.44) in both sex, 40.19mm in male, and 39.21mm in female. And the sexual difference was significant($0). 3. The average inter-canine width was 27.16mm(s.d. 1.78) in both sex, 27.41mm in male, and 26.77mm in female. And the sexual difference was significant($0). 4. The average inter-first molar width was 46.93mm(s.d. 2.67) in both sex, 47.72mm in male, and 45.7mm in female. And the sexual difference was significant($0). 5. The inter-second molar width was average 56.09mm(s.d. 3.01) in both sex, 57.24mm in male, and 54.32mn in woma. And the sexual difference was significant($0). 6. The arch form was classified into three shapes based on the incisal and canine angle. V-shape showed $124.88^{\circ}$ of incisal angle and $141.64^{\circ}$ of canine angle, U-shape showed $152.76^{\circ}\;and\;125.35^{\circ}$, and O-shape showed $138.03^{\circ}\;and \;33.66^{\circ}$ respectively. Each shape distribution was that the V-shape was 14.2%, the U-Shape was 14.7%, and the O-shape was 71.1% of the 225 study models. 7. It was thought that the use of second molar width is more reasonable than height for classifying the dental arch size. The arch size was classified into four sizes based on the second molar width. Size 1 showed range of 42.24-48.23mm, size 2 showed 48.24-54.23mm, size 3 showed 54.24-60.23mm, and size 4 showed 60.24-66.23mm respectively. Each arch size distribution was that the size 1 was 1.3%, the size 2 was 27.1%, the size 3 was 63.6%, and the size 4 was 8.0% of the 225 study models.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.345-350
• /
• 2018

Nanomaterials have considerable potential to solve several key challenges in various electrochemical devices, such as fuel cells. However, the use of nanoparticles in high-temperature devices like solid-oxide fuel cells (SOFCs) is considered problematic because the nanostructured surface typically prepared by deposition techniques may easily coarsen and thus deactivate, especially when used in high-temperature redox conditions. Herein we report the synthesis of a self-regenerated Pd metal nanoparticle on the perovskite oxide anode surface for SOFCs that exhibit self-recovery from their degradation in redox cycle and $CH_4$ fuel running. Using Pd-doped perovskite, $La(Sr)Fe(Mn,Pd)O_3$, as an anode, fairly high maximum power densities of 0.5 and $0.2cm^{-2}$ were achieved at 1,073 K in $H_2$ and $CH_4$ respectively, despite using thick electrolyte support-type cell. Long-term stability was also examined in $CH_4$ and the redox cycle, when the anode is exposed to air. The cell with Pd-doped perovskite anode had high tolerance against re-oxidation and recovered the behavior of anodic performance from catalytic degradation. This recovery of power density can be explained by the surface segregation of Pd nanoparticles, which are self-recovered via re-oxidation and reduction. In addition, self-recovery of the anode by oxidation treatment was confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM).

• 한국환경과학회지
• /
• 제24권2호
• /
• pp.175-188
• /
• 2015

For 63 soil series distributed in Jeju Island, natural uncultivated soils in each soil series were collected, and their physicochemical properties and their concentrations of 19 heavy metals including 8 heavy metals which are regulated by Korean Soil Environment Conservation Law, were analyzed. Moreover, the correlations between physicochemical properties and heavy metal concentrations, and between heavy metal concentrations were analyzed. The heavy metals distributed in the higher concentrations and the lower concentrations with arithmetric mean value, were Mn(730 mg/kg) and Ba(493 mg/kg), and Hg(0.146 mg/kg) and Tl(0.096 mg/kg), respectively. The correlations between pH($H_2O$) and heavy metals(Hg, Ni, Co, Se), between pH(NaF) and heavy metals(Hg, Ba, Se, Tl), and between organic matter content and heavy metals(Hg, Tl) were significant at the 0.01 level. From the correlations between heavy metal concentrations, there were 22 where there were significant at the 0.01 level and they showed positive correlation. Among those, the heavy metals showing the correlation higher than r=0.5, were Sb-V(0.878), Mo-Sn(0.867), Co-V(0.654), Co-Sb(0.648), Be-Sn(0.546), and Sn-Tl(0.528).

• Journal of Welding and Joining
• /
• 제13권3호
• /
• pp.134-146
• /
• 1995

Aluminium nitride(AlN) is currently under investigation as potential candidate for replacing alumium oxide(Al$_{2}$ $O_{3}$) as a substrate material for for electronic circuit packaging. Brazing of aluminium nitride(AlN) to Cu with Ag base active alloy containing Ti has been investigated in vacuum. Binary Ag$_{98}$ $Ti_{2}$(AT) and ternary At-1wt.%Al(ATA), AT-1wt.%Ni(ATN), AT-1wt.% Mn(ATM) alloys showed good wettability to AlN and led to the development of strong bond between brate alloy and AlN ceramic. The reaction between AlN and the melted brazing alloys resulted in the formation of continuous TiN layers at the AlN side iterface. This reaction layer was found to increase by increase by increasing brazing time and temperature for all filler metals. The bond strength, measured by 4-point bend test, was increased with bonding temperature and showed maximum value and then decreased with temperature. It might be concluded that optimum thickness of the reaction layer was existed for maximum bond strength. The joint brazed at 900.deg.C for 1800sec using binary AT alloy fractured at the maximum load of 35kgf which is the highest value measured in this work. The failure of this joint was initiated at the interface between AlN and TiN layer and then proceeded alternately through the interior of the reaction layer and AlN ceramic itself.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.33-38
• /
• 2004

This study was aimed at testing the gene expression of antioxidant enzymes and apoptosis genes for in vitro culture in porcine embryos produced by in vitro maturation/in vitro fertilization (IVM/IVF). Pocine preimplantation embryos obtainted from IVM/IVF can be successfully culture in vitro, but they are delayed or stop to develop at specific developmental stage. Many factors such as reactive oxygen species and apoptosis in an IVM/IVF system followed by in vitro culture influence the rate of production of viable blastocysts. Porcine embryos derived from IVM/IVF were cultured in the atmosphere of 5% $CO_2$ and 20% $O_2$ at $38.5^{\circ}C$ in NCSU23 medium. The patterns of gene expression for antioxidant enzymes and apoptosis genes during in vitro culture in pocine IVM/IVF embryos were examined by the modified semi-quantitative single cell reverse transcriptase-polymerase chain reaction (RT-PCR). Porcine embryos produced by in vitro procedures were expressed mRNAs for CuZn-SOD, GAPDH and GPX, whereas transcripts for Mn-SOD and catalase were not detected at any developmental stages. Expression of caspase-3 mRNA was detected at 2 cell, 8 cell 16 cell and blastocyst, but p53 mRNA was not detected at any stages. The fas transcripts was only detected in blastocyst stage. These results suggest that various antioxidant enzymes and apoptosis genes play crucial roles in vitro culture of porcine IVM/IVF embryos.

• KSBB Journal
• /
• 제25권1호
• /
• pp.79-84
• /
• 2010

In the present study, we isolated a new bacterial strain producing invertase (EC 3.2.1.26) and determined optimized culture condition in flask culture. The strain was identified as Bacilus flexus determined by the 16S rDNA sequencing method. The invertase was produced only in the sucrose medium as the sole carbon source. Potassium nitrate was an adequate nitrogen source for enzyme production, whereas meat peptone showed the highest bacterial growth. Enzyme production was increased about 2-fold when $MgSO_4\cdot7H_2O$ was supplemented to the growth media. The optimum temperature was found to be $30^{\circ}C$ for both enzyme production and bacterial growth. Invertase exhibited pH optima in the range 5.0-6.0 and have a temperature optimum at $40^{\circ}C$, similarly to other invertases found from different microbial sources. Several mineral ions (K and Fe) stimulated the invertase activity, whereas some bioelements (Ag, Mg, and Mn) inhibited enzyme activity. Under the optimized culture condition, the maximum enzyme production (over 250 units/mL) was achieved at 20 h. To the best of our knowledge, this is the first time to report on invertase production by Bacilus flexus.

• 한국식품조리과학회지
• /
• 제16권5호
• /
• pp.425-430
• /
• 2000

우리 나라에서 재배하여 생산한 식용 지하 부위 채소들(감자, 고구마, 당근, 무, 양파, 마늘)의 생산지역에 따른 무기질 성분의 차이와 중금속 함유 여부를 알아보기 위하여 그 성분을 분석하였다. 먼저 microwave digestion oven에서 시료를 HNO$_3$ 4ml(65%)과 $H_2O$$_2$1ml(30%)로 용액 화하여 hot plate에서 시료를 1 ml까지 휘발시켜서 1% HNO$_3$로 희석한 후 ICP-AES로 무기질 성분을 정성, 정량 분석하였다. 모든 시료에서 가장 많이 분석된 무기성분은 K이었으며 각각의 성분 함유도는 모든 시료마다 다르게 나타났다. 감자는 다른 식용지하 부위 채소에 비해 Na와 Fe의 함량이 상대적으로 낮게 분석되었는데 K, P, Mg순의 함량을 보였고 K은 김포 지방산이, Ca는 삼척 지방산이 많이 함유한 것으로 조사되었다. 고구마는 분석한 거의 모든 지역에서 Ca 함량이 감자의 두 배 이상으로 높게 나타났다. 당근은 Na 함량이 다른 채소에 비해 높았으며 특히 진부 지방산이 많이 함유하고 있었다. 무는 K, Ca, P, Mg 순으로 함량이 높았는데 특히 양구 지방산이 높게 나타났다. 또한 Ca의 함량이 높았는데 감자의 5-8배였고, 다른 지하 부위 채소와 비교하여도 2-3배 이상이었다. 양파는 K, P Ca의 함량이 타 채소에 비해 낮게 분석되었었는데 지역별 차이는 많지 않았으며 문경 지방산이 Ca의 함량이 높았다. 마늘의 경우 K의 함량은 의성 지방산이, Ca의 함량은 서산 지방산이 높았으며 K과 P의 함량이 상대적으로 높았다.

• 전기화학회지
• /
• 제2권4호
• /
• pp.202-208
• /
• 1999

[ $50/50 vol\%$ ] LSM-YSZ의 양극은 콜로이드 증착법에 의해 YSZ 전해질상에 증착하였다. 양극 특성은 주사전자현미경과 임피던스 분석기에 의해 고찰하였다. LSM-YSZ양극의 제조 조건에 따른 영향을 관찰하였으며, 그 영향에 대한 개선책이 고체산화물 연료전지의 성능향상을 위해 제시되었다. 임피던스에 대한 온도, YSZ전해질로의 양극 접착에 대한 표면 오염, 사용하는 Pt 페이스트, 미세구조에 대한 곡표면에 가해진 연무질 분사기술과 셀과 셀의 변동성에 대한 영향들은 각각 $900^{\circ}C$ 측정, YSZ표면 연마, 일단의 Pt페이스트 사용, 평편한 YSZ판의 사용과 일관된 절차와 기술의 사용에 의해 해결되었다. 이때 재현성 있는 임피던스 스펙트럼들이 향상된 셀을 사용함으로써 얻어졌고, $900^{\circ}C$에서 (공기)LSM-YSZ/YSZ/LSM-YSZ(공기) 셀에 대해 측정된 전형적인 임피던스 스펙트럼들은 2개의 불완전한 호로 구성되었다. 또한 LSM-YSZ 양극의 임피던스 특성은 촉매층, 양극 조성, 인가 전류 등과 같은 실험 조건들에 의해서도 영향을 받았다.

• 한국유기농업학회지
• /
• 제7권2호
• /
• pp.163-167
• /
• 1999

두 종류의 상치에 대한 화학 비료와 유기길 비료의 사용, 그리고 목초액 처리구와 무처리구로 나눈 것의 미량원소 함량과의 상호 관계를 연구하기 위해 총 20개 처리구를 두어 총 10주 동안 실험한 결과는 다음과 같다. 1. 화학비료와 유기질 비료 사이에 목초액 비처리구에서 Fe의 함량이 차이가 있었고, 목초액 처리가 상치내 Fe 함량을 높이는 경향을 나타냈다. 이와 같은 현상은 상치의 품종에 따라 다소 다르게 나타났다. 2. Ca의 경우 목초액 처리가 상치내 Ca 함량에 영향을 미쳤으며, Ca 함량도 상치의 품종에 따라 다르게 나타났다. 아울러 목초액 비처리구에서 유기질 비료를 사용하는 경우 상치 내의 Ca 함량을 낮추는 것으로 나타났다. 3. 상치 내의 Mn, Cu, Zn의 함량은 처리구별, 품종면에서 큰 차이가 나타나지 않았다.