• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.889-892
• /
• 2004

Acicular type aragonite precipitated calcium carbonate was synthesized by carbonation reaction of $Ca(OH)_2$ slurry and $CO_2$ gas. As increasing the initial concentration of $Mg^{2+}$ ion, calcite crystal phase substantially decreased while that of aragonite crystal phase increased. According to XRD and EDS analysis, it was found that the addition of $MgCl_2$ induced the $Mg^{2+}$ ion to substitute in $Ca^{2+}$ ion site of calcite lattice then the unstabled calcite structure be resolved, consequently the growth of calcite structure is interrupted while the growth of aragonite structure is expedited.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.4
• /
• pp.184-193
• /
• 2021

This study demonstrates formation behavior and morphological changes of PEO (Plasma Electrolytic Oxidation) films on AZ91 Mg alloy as a function of pre-treatment time in 1 M HF solution at 25 ± 1 ℃. The electrochemical behavior and morphological changes of AZ91 Mg alloy in the pre-treatment solution were also investigated with pre-treatment time. The PEO films were formed on the pre-treated AZ91 Mg alloy specimen by the application of anodic current 100 mA/cm² of 300 Hz AC in 0.1 M NaOH + 0.4 M Na₂SiO₃ solution. Vigorous generation of hydrogen bubbles were observed upon immersion in the pre-treatment solution and its generation rate decreased with immersion time. It was also found that 𝛽-Mg₁₇Al₁₂ in AZ91 Mg alloy was dissolved and a protective thin film of MgF₂ was formed on the AZ91 Mg alloy surface during the pre-treatment process in the 1 M HF solution. PEO film did not grow on the AZ91 Mg alloy specimen when the surface was not pre-treated and irregular PEO films with nodular defects were formed for the specimens pre-treated up to 1 min. Uniform PEO films were formed when the AZ91 Mg alloy specimen was pre-treated more than 3 min. The growth rate of PEO films on AZ91 Mg alloy increased significantly with increasing pre-treatment time.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.818-822
• /
• 2004

Gastroprotective effects of Korean rice-wine (Yakju) in two types of acute experimental gastric ulcer induced in rats and in mice were evaluated. Korean rice-wine were administered to 24-hr fasted rats 30 min before administration of 60% EtOH in 150 mM HCl or absolute ethanol. Korean rice-wine prevented formation of gastric ulcers induced by 60% EtOH in 150 mM HCl at oral doses of 250-1,000mg/kg and reduced gastric ulcers induced by absolute ethanol at oral doses of 62.5-1,000mg/kg, and inhibitory effect against 30% alcohol treatment for 7 days (twice/day). These results suggest Korean rice-wine have inhibitory effects on gastric lesion and ulceration.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.281-282
• /
• 2014

본 연구는 공정시간에 따른 전해 플라즈마 공정(Electrolytic Plasma Processing, EPP) 공정에 의해 형성된 산화 코팅층의 특성 변화를 알아보고자 한다. 실험에 사용되는 전해용액은 $Na_2SiO_3$(12g/l) + $Na_2SiF_6$(0.3g/l)+NaOH(3g/l) 기본용액에 다양한 농도의 NaOH(0-5g/l) 첨가한 전해용액을 사용하였다. AZ61 마그네슘 합금을 모재($22{\Phi}{\times}10mm$)로 사용하였으며 실험은 5분-60분 동안 진행되었다. 공정시간에 변화에 따른 EPP 코팅층 특성을 측정한 결과 공정시간이 증가함에 따라 코팅층 표면의 기공 크기가 커지고 코팅층 내에 기공수가 즐어드는 것을 확인하였다. 또한 XRD 분석을 통하여 형성된 코팅층에서 MgO, Mg2SiO4 상이 나타난 것을 확인할 수 있었다.(No. 2011-0030058),(2012H1B8A2026212)

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.149-154
• /
• 2010

The feasibility of lead removal by electrolytic coprecipitation was investigated. Electrolysis bath was divided into anode and cathode chamber with anion exchange resin filled membrane. Sea water was electrolyzed and pH of the electrolyte in cathode chamber was increased. Consequently it induced the formation of $Mg(OH)_2$ and $CaCO_3$. The colloidal type precipitates, hich have high surface area, adsorbed lead ions in sea water and coprecipitated. Sea water electrolyses were conducted at different current density. Concentrations of Mg, Ca and Pb in the solution were measured with titration and ASV method. Morphology and crystallography were analyzed with SEM, EDS and XRD. As pH and current density increased, most of lead ions in the sea water were successfully removed.

• Journal of Plant Biotechnology
• /
• v.34 no.1
• /
• pp.7-10
• /
• 2007

Plant regeneration system from floral stem of Mymphoides indica via somatic embryogenesis was established. After four weeks of culture onto 1/2MS medium containing 2,4-D, pale-yellow globular structures and calluses were formed on the cut surface of floral stem explants. Upon transfer to 1/2MS basal medium, pale-yellow globular structures were developed into somatic embryos and normal plantlets. These results indicated that pale-yellow globular structures and calluses from floral stem were globular embryos and embryogenic calluses, respectively. The frequency of embryogenic callus formation from floral stem was reached to nearly 100% when floral stem was cultured onto 1/2Ms medium supplemented with low concentration of 2,4-D (0.1 to 0.3 mg/L). However, the higher concentration of 2,4-D resulted in decrease of the frequency of embryogenic callus formation. In this study, low concentration of 2,4-D had a stimulative role in embryogenic callus formation, whereas BA showed inhibitory role in callus formation. In comparison to floral stem, leaf explants showed low frequency of embryogenic callus formation. The highest frequency of embryogenic callus formation from leaf explants was 9.5% when leaf explants were cultured onto 1/2MS medium supplemented with 0.3 mg/L of 2,4-D. The plant regeneration system of Nymphoides indica established in this study, might be applied to mass proliferation, conservation of genetic resources and genetic transformation for molecular breeding.

• Journal of Korea Foundry Society
• /
• v.19 no.1
• /
• pp.38-46
• /
• 1999

Microstructural characteristics and strengthening behavior in Mg-5wt%Zn-0.6wtZr alloys have been investigated by a combination of optical, secondary electron and transmission electron microscopy, differential thermal analysis, and hardness and tensile, creep property measurements. The result have been compared with those of Mg-5wt%Zn alloys. The as-squeeze cast microstructure consisted of dendrite ${\alpha}-Mg$, interdendrite or intergranular $Mg_7Zn_3$ and fine dispersoids of $ZnZr_2$. The size of secondary solidification phases in Mg-5wt%Zn-0.6wtZr alloys was significantly smaller than that of the Mg-5wt%Zn alloys due to the existence of fine dispersoid of $ZnZr_2$ which also effected the refinement of grain size. TEM study showed that the main cause of age hardening is formation of fine rodlike ${\beta}_1\;'$ precipitates as well as fine $ZnZr_2$ dispersoids. Due to the observed microstructural characteristics mechanical propeties of Mg-5wt%Zn-0.6wtZr alloys was found to be superior to those of Mg-5wt%Zn alloys.

• Journal of Plant Biotechnology
• /
• v.32 no.4
• /
• pp.281-285
• /
• 2005

To establish the mass proliferation system of Ardisia pusilla DC, the shoot tips of Ardisia pusilla DC were cultured on the MS and half-strength MS medium supplemented with $0{\sim}5.0$ mg/L BA or $0{\sim}0.5$ mg/L thidiazuron(TDZ), respectively. A few multiple shoot formation observed when the shoots were cultured on MS medium containing TDZ. However, the frequency of multiple shoot formation was reached up to 82.4%, when the shoots were cultured on half-strength MS medium supplemented with 0.5 mg/L BA. Also the number of shoot per explant was 7.1. To promote rooting from multiple shoot, newly formed shoots were transferred to half-strength MS medium containing 0.5 mg/L IBA or 0.5 mg/L NAA, respectively. Regenerated plantlets were grown to normal mature plants in soil.

• Biomolecules & Therapeutics
• /
• v.8 no.1
• /
• pp.32-37
• /
• 2000

Recently new soybean saponins with D DMP (2,5-dihydroxy-6-methyl-2,3,- dihydro-4H-pyran-4-one) moiety have been isolated from legumes. The purpose of this study is to characterize ROS scavenging activities of DDMP saponins ($\alpha$g, $\beta$g saponin) isolated from Glycine max (L.) Merrill. The scavenging activity on OH was examined in terms of lipid peroxidation in the rat liver homogenates and the same activity on $O_2$ was also determined in the xanthine-xanthine oxidase system, respectively. Up to 0.25 mg DDMP saponins ($\alpha$g and $\beta$g saponins) did not cause any significant effects on the prevention of lipid peroxidation as compared with the control group. In terms of superoxide scavenging activities, 0.25 and 0.5 mg $\alpha$g saponin inhibits only 2.6% and 5.5% (p<0.05) of the control group, respectively. However, $\alpha$g saponin dose-dependently (p<0.01, r=0.955) inhibits the formation of superoxide radical unto 21.3% of the control group with a maximal dose of 0.5 mg (p<0.01), equivalent to 0.17 units of superoxide dismutase activity.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.1
• /
• pp.39-47
• /
• 2014

The peculiar feature of cathodic protection in seawater has the capability to form mineral calcareous deposits such as magnesium and calcium on metal surfaces. It is assumed that $OH^-$ ions are generated close to the metal surface as a result of cathodic protection and generated $OH^-$ ions increases the pH of the metal/seawater interface outlined as the following formulae. (1) $O_2+2H_2O+4e{\rightarrow}4OH^-$, or (2) $2H_2O+2e{\rightarrow}H_2+2OH^-$. And high pH causes precipitation of $Mg(OH)_2$ and $CaCO_3$ in accordance with the following formulae. (1) $Mg^{2+}+2OH^-{\rightarrow}Mg(OH)_2$, (2) $Ca^{2+}+CO{_3}^{2-}{\rightarrow}CaCO_3$. The focus of this study was to increase the amount of $CO{_3}^{2-}$ with the injection of $CO_2$ gas to the solution for accelerating process of the following formulae. (1) $H_2O+CO_2{\rightarrow}H_2CO_3$, (2) $HCO^{3-}{\rightarrow}{H^+}+CO{_3}^{2-}$. Electrodeposit films were formed by an electro-deposition technique on steel substrates in solutions of both natural seawater and natural seawater dissolved $CO_2$ gas with different current densities, over different time periods. The contents of films were investigated by scanning electron microscopy(SEM) and X-ray diffraction(XRD). The adhesion and corrosion resistance of the coating films were evaluated by anodic polarization. From an experimental result, only $CaCO_3$ were found in solution where injected $CO_2$ gas regardless of current density. In case of injecting the $CO_2$ gas, weight gain of electrodeposits films hugely increased and it had appropriate physical properties.