• 제목/요약/키워드: $Li_2ZrO_3$

검색결과 110건 처리시간 0.027초

주석 슬랙중 $Ta_2O_5,\;Nb_2O_5$ZrO_2$의 단일희석법을 이용한 X-선 형광분석 (X-Ray Fluorescence Analysis of $Ta_2O_5,\;Nb_2O_5$ and ZrO_2$ in Tin-Slag Samples using Simple Dilution Method)

  • 김영상;성학제
    • 대한화학회지
    • /
    • 제28권5호
    • /
    • pp.293-301
    • /
    • 1984
  • 단일 희석법을 이용한 X-선형광분광법으로 주석, 슬랙중 $Ta_2O_5$$Nb_2O_5$, $ZrO_2$등을 정량분석하였다. 이 방법은 표준 검정 곡선을 직선으로 되게끔 수학적으로 보정하는 것이다. 시료의 조성과 비슷한 한개의 합성표준시료와 분석시료를 무수물의 $Li_2B_4O_7$으로 묽혀서 각각 시료가 1%, 2%, 3%되게 한다. 묽힌 시료들을 $1150^{\circ}C$에서 30분간 용융하여 유리화된 구슬을 만든 다음, 곱게 갈아서, 다시 유압기로 압축하여 분석시편을 만든다. 이 시편을 사용하여 X-선 세기를 측정하고, 원소의 특성 X-선 세기에 관한 J. Scherman의 식으로부터 유도한 식에 대입하여 분석 결과를 계산했다. 이들 분석결과들을 표준검정곡선법으로 얻은 기준값과 잘 일치하며, 결과에 대한 재현성도 좋음을 보여 주었다.

  • PDF

주석-슬랙중 $Ta_2O_5,\;Nb_2O_5$$ZrO_2$의 이중희석법을 이용한 X-선 분광분석 (X-Ray Spectrometric Determination of $Ta_2O_5,\;Nb_2O_5$ and $ZrO_2$in Tin-Slag Samples by Double Dilution Technique)

  • 김영상;박기채
    • 대한화학회지
    • /
    • 제28권5호
    • /
    • pp.302-308
    • /
    • 1984
  • 이중희석법을 이용한 X-선 분광법으로 주석-슬랙 중 $Ta_2O_54, $Nb_2O_5$$ZrO_2$등을 정량하였다. 주석시료와 이것과 조성이 비슷한 한개의 합성표준시료를 무수 $Li_2B_4O_7$으로 희석하여 희석된 시료중 이들의 함량이 1.00%, 2.00%, 3.00% 되게 잘 혼합하였다. 혼합시료를 $1,150^{\circ}C$에서 30분간 용융하여 유리상태로 만들었다. 다시 잘 분쇄하고, 유압기를 이용하여 Pellet로 만들어 분석 시편으로 사용했다. 형광 X-선 세기를 측정하여 희석식에 대입하여 각 시료에서 분석성분의 함량을 계산하였다. 이중희석법으로 얻은 분석결과들은 대표적인 분석법인 표준검정 곡선법에 의한 값들과 혀용오차범위내에서 잘 일치하고 있다. 아울러 단일희석법에 의한 결과와도 잘 일치하고 있으며 각 분석결과에 대한 재현성도 좋음을 보여 주었다.

  • PDF

리륨이차전지용 $LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ 양극활물질의 표면개질에 따른 전지특성 (Cell Performances of Surface-Treated $LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ Material for Li Secondary Battery)

  • 김현수;공명철;김기택;문성인
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.294-295
    • /
    • 2007
  • $LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ material was surface modified with Zr-phosphate. Scanning electron microscope, energy dispersive spectroscopy and electrochemical studies indicate that surface modification improve the rate capability. Electrochemical studies were performed by assembling 2032 coin cells with lithium metal as an anode.

  • PDF

결정화도에 따른 LAS$(Li_2O-Al_2O_3-SiO_2)$계 결정화유리의 표면조도특성 (Surface Roughness of Glass-Ceramic $(Li_2O-Al_2O_3-SiO_2)$ System Based on Different Crystallinities)

  • 김유진;정병해;이창훈;김형순
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
    • /
    • pp.98-98
    • /
    • 2003
  • 초내열성 결정화유리는 전기전자부품, 천체만원경의 반사경, 직화용 조리기기, 군사용 부품 등에 광범위하게 이용되고 있는데 이중 LAS 계가 가장 오랫동안 알려진 조성 계이다. 이 결정화유리는 주입성형후 열처리에 의하여 결정상을 생성하여 사용되는데 표면이 매우 낮은 조도를 갖는 것으로 알려져 있으나 실제로는 제조상에 조도가 높게 나타나는 문제점이 제기되고 있다. 따라서 본 연구에서는 미세조직적인 측면에서 이러한 점을 연구하고자 Li$_2$O-AL$_2$O$_3$-SiO$_2$를 주성분으로 하고 소량의 MgO와 핵생성제로서 TiO$_2$, ZrO$_2$를 사용하여 시편을 제조하였다. 제조된 결정화유리의 결정화도의 차이에 따라 AFM, $\alpha$-STEP등으로 표면의 조도를 정량화였다. 결정상의 종류, 크기, 결정화도, 결정상간의 간격 등이 표면의 조도에 어떻게 영향을 주는가 에 대하여 연구한 결과를 제시하였다.

  • PDF

삼중수소 증식 재료 개발을 위한 Li4SiO4 분말합성

  • 유인근;이상진;조승연;안무영;구덕영
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.324-324
    • /
    • 2010
  • 핵융합의 고체형 증식(Helium Cooled Solid Breeder : HCSB) 블랑켓(Blanket Module)은 삼중수소 증식을 위해서 Li4SiO4, Li2TiO3, Li2O 및 Li2ZrO3 등의 페블이 고려되고 있다. 이러한 페블을 제조하기 위해서는 먼저 각각의 분말 제조가 선행되어야 한다. 한국의 Test Blanket Module(TBM)은 Li4SiO4 페블을 개발을 개발하여 사용할 예정이고 옵션으로 Li2TiO3 페블을 개발하는 것으로 되어 있다. Li4SiO4 페블을 개발하기 위해서 먼저 분말합성이 필수적이다. Li4SiO4 분말을 합성에 하기 위해서는 Lithium 금속염과 실리카 졸을 용매 및 폴리머 캐리어로서의 두 가지 기능을 하는 에틸렌글리콜에 첨가한 후 가열하여 완전히 용해시킨 후 혼합 용액을 건조시켜 겔형의 전구체를 제조한다. 이를 하소한 후 결정화시켜 Silicate 분말을 얻는데 이때의 건조, 하소 및 결정화 온도의 조건에 따른 분말의 크기 및 특성이 각각 다르다. 즉, 바인더 물질의 비율과 합성온도에 따라 특성이 약간씩 다른 분말을 얻을 수 있었다. 이렇게 얻어진 Silicate 분말은 지르코니아 볼을 이용하여 약 24 시간 동안 볼 밀링 과정을 통해 입도가 작은 미세한 Silicate 분말로 만들었다. 합성된 분말은 여러 가지 시험 및 분석을 통해서 검증되었으며, 불순물 등은 관찰되지 않았다.

  • PDF

입도분포에 따른 하상퇴적물의 지구화학적 분산 및 부화 (Geochemical Dispersion and Enrichment of Fluvial Sediments Depending on the Particla Size Distribution)

  • 이현구
    • 자원환경지질
    • /
    • 제32권3호
    • /
    • pp.247-260
    • /
    • 1999
  • Geochermical characteristics of the fluvial sediments deprnding on particle size distribution size were investigated in the respect of majir, minor and rare eath element chemisitry. Ratios of $Al_{2}O_{3}/Na_{2}O$ and $K_{2}O/Na_{2}O$ of the sediments show the homogeneous valus, and partly positive correlation with $SiO_{2}/Al_{2}O_{3}$, respecively. Characteristics of minor element ratios (V/Ni, Cr/V, Ni/Co and Zr/Hf)are within the lower and narrow range. Thesesuggested that sediment sources may be acidic to intermediate granitic rock, and may be explained by simple weathering and sedimentation. With increasing SiO2 contents, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO and MgO decreased, but those of $K_{2}O$ and $Na_{2}O$ increased, Concentrations of Ba, Be, Cs, Cu, Li, Ni, Sr, V and Zr show comparatively normal negative and some positive trends. Compared with the mean composition of granite, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, MnO, CaO and MgO in the sediments of the study area were highly enriced. Among some minor and rare earth elements, concentrations of As, Cd, Cu, and V were enriched, but those of Be, Ce, Rb, Sc, Sr and Zn were depleted when compared with average composition of granite. By decreasing of particle size fractions, SiO2, Rb and Sr conterts decreased, but concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO, MgO, $TiO_{2}$, MgO, $P_{2}O_{5}$, Be, Cu, Hf, Pb, V and Zr increased. From the correlations between particle size fractions and element concenreations, some elements of $Fe_{2}O_{3}$, CaO, MgO, $P_{2}O_{5}$, Cu, Ni, Zn and Zr showed typical trends in the secondary contramination sediments. These trends are typically shown under 100 mesh fractions. It indicates that the fraction of minus 100 mesh is the optimum size fraction for geochemical and environmental survey.

  • PDF

안정화 CdS-cdSe계 채료에 관한 연구 제1보 CdS-CdSe 적색채료와 $ZrSiO_4$의 합성 (Study on Stabilized CdS-CdSe Red Stain A Study on Syntheisis of CdS-CdSe Red Stain and Zircon)

  • 이종근;김종옥
    • 한국세라믹학회지
    • /
    • 제23권2호
    • /
    • pp.50-54
    • /
    • 1986
  • Effects of additionof $NH_4Cl$, NaBr and LiF on the formation of Zircon and the synthesis of CdS-Se red stain were investigated by means of XRD, DTA and the color standard and color nomenclature. The red stain of CdS-Se system shows a little difference dependent on firing temperature on firing conditon. Consequently it forms a good soid-solution with red color under the ratio of CdS and Se 3.5 -4.1 at 58$0^{\circ}C$. But it changes to dark red as increasing Se. LiF is the most effective in mineralizer to preparae zircon with the equilbrant molar $SiO_2$ and ZrO Zircon makes a good preparation in 0.33 mole LiF from 90$0^{\circ}C$.

  • PDF

Low-Firing Pb(Zr,Ti)O3-Based Multilayer Ceramic Actuators Using Ag Inner Electrode

  • Han, Hyoung-Su;Park, Eon-Cheol;Lee, Jae-Shin;Yoon, Jong-Il;Ahn, Kyoung-Kwan
    • Transactions on Electrical and Electronic Materials
    • /
    • 제12권6호
    • /
    • pp.249-252
    • /
    • 2011
  • We investigated the low firing of $Li_2CO_3$ added $0.2Pb(Mg_{1/3}Nb_{2/3})O_3$ - 0.3Pb($Fe_{1/2}Nb_{1/2}$) - $0.5Pb(Zr_{0.475}Ti_{0.525})O_3$ (PMN-PFN-PZT) ceramics and multilayer actuators (MLAs) using Ag inner electrodes. It was found that 0.1 wt% $Li_2CO_3$ was quite effective in lowering the sintering temperature of PMN-PFN-PZT ceramics from $1,100^{\circ}C$ down to $900^{\circ}C$ without deteriorating their piezoelectric ceramics ($d_{33}$ = 425 pC/N and $k_p$ = 61.9%). However, excess $Li_2CO_3$ up to 0.3 wt% brings about unwanted problems such as the formation of a $LiPbO_2$ secondary phase and subsequent degradation in the piezoelectric properties. Using 0.1 wt% $Li_2CO_3$ added PMN-PFN-PZT ceramics, MLAs with Ag inner electrodes were successfully fabricated, resulting in a normalized strain of 580 pm/V at an electric field of 1.5 kV/mm.

펄스 레이저 증착법에 의해 제작된 Laser pulse repetition rate의 변화에 따른 $Pb(Zr_{0.48}Ti_{0.52})O_3$ (PZT) 박막의 전기적 특성 (Effect of Laser Pulse Repetition Rate on the Electrical Properties of $Pb(Zr_{0.48}Ti_{0.52})O_3$ (PZT) Thin Films grown by Pulsed Laser Deposition)

  • 이동화;이상렬
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.11-12
    • /
    • 2005
  • [ $Pb(Zr_{0.48}Ti_{0.52})O_3$ ] (PZT) thin films were deposited on Pt(111)/Ti/$SiO_2$/Si substrates by pulsed laser deposition. In order to study the effect of different laser pulse repetition rate on the dielectric and ferroelectric properties of PZT thin films,2 Hz and 5 Hz of laser pulse repetition rate were selected. We compared the results of XRD pattern, dielectric constant and hysteresis characteristics. From the experimental data, we found that the electrical properties of PZT thin films which grown ar 2 Hz of laser pulse repetition rate were better than those which grown at 5 Hz of laser pulse repetition rate.

  • PDF

투명 결정화 유리에 관한 연구 -Li2O-Al2O3-SiO2계 조성에 관하여- (Studies on Transparently Crystallized Glass -On Li2O-Al2O3-SiO2 Composition-)

  • 박용완;김건은;연석주;조중희
    • 한국세라믹학회지
    • /
    • 제26권3호
    • /
    • pp.315-322
    • /
    • 1989
  • Li2O-Al2O3-SiO2 system glasses contained P2O5, TiO2 and ZrO2as the nucleating agents were melted and formed. The glass was subsequently heated first to nucleate and then to grow the crystals. At constant nucleating agent content the base glass compositions were varied and the influences of these variations on the crystallization behaviour were investigated. The study was made by measurement of thermal expansion coefficient, differential thermal analysis, X-ray diffraction analysis, scanning electron microscope observation and transmission measurement of crystallized glass specimen in visible region. It was shown that the content of crystalline phase decreased with increasing SiO2 content as well as decresing Li2O in the base glass compositions. As the result of X-ray diffrection analysis, the major crystal was $\beta$-quartz solid solution. The degree of crystallinity which was calculated using the noncrystalline scattering methods increased in S-shape with increasing heat treatment time. This change was similar to that in thermal expansion coefficient. The transmissions of 5mm thick samples were 80-90% in visible ray region.

  • PDF