• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.303-307
• /
• 2007

Transparent In-doped zinc oxide (IZO) thin films are deposited with variation of pulsed DC power at Ar atmosphere on coming 7059 glass substrate by pulsed DC magnetron sputtering. A c-axis oriented IZO thin films were grown in perpendicular to the substrate. The optical transmittance spectra showed high transmittance of over 80% in the UV-visible region and exhibited the absorption edge of about 350 nm. Also, the IZO films exhibited the resistivity of ${\sim}10^{-3}{\Omega}\;cm$ and the mobility of ${\sim}6cm/V\;s$. Organic Light-emitting diodes (OLEDs) with IZO/N,N'-diphenyl-N, N'-bis(3-methylphenl)-1, 1'-biphenyl-4,4'-diamine (TPD)/tris (8-hydroxyquinoline) aluminum ($Alq_3$)/LiF/Al configuration were fabricated. LiF layer inserted is used as an interfacial layer to increase the electron injection. Under a current density of $100\;mA/cm^2$, the OLEDs show an excellent efficiency (9.4 V turn-on voltage) and a good brightness ($12000\;cd/m^2$) of the emission light from the devices. These results indicate that IZO films hold promise for anode electrodes in the OLEDs application.

• 한국재료학회지
• /
• 제11권1호
• /
• pp.39-43
• /
• 2001

Nanocrystalline Fe-Sm-O thin films were prepared by RF magnetron reactive sputtering method in $Ar+O_2$mixed atmosphere with the $O_2$content of 5%. The compositions of the thin films were changed by changing the number of $Sm_2O_3$ chips. The best soft magnetic properties of the thin film with the composition of $Fe_{83.4}Sm_{3.4}O_{13.2}$ were saturation flux density of 18 kG, coercivity of 0.82 Oe and effective permeability about 2,600 at 0.5~100 MHz, respectively. The electrical resistivity of Fe-Sm-O thin films was increased with increasing the amount of Sm and O elements which combined each other, the electrical resistivity of$Fe_{83.4}Sm_{3.4}O_{13.2}$ thin film was $130{\mu}{\Omega}cm$. In case of the small amount of Sm and O elements, the microstructures of Fe-Sm-O thin films showed a precipitated phase of $Sm_2O_3$ on the ${\alpha}-Fe$ phase. With the increase of the amount of Sm and O elements, the microstructures of the Fe- Sm-O thin films were changed into a mixed structure of ${\alpha}-Fe$ crystal-phase and Sm-oxide amorphous phase. The Fe-Sm-O thin films with Fe content in the range of 72~94 at% exhibited the quality factor (Q = $\mu$′/$\mu$") of 7~75 up to 50 MHz.

• 마이크로전자및패키징학회지
• /
• 제14권4호
• /
• pp.37-42
• /
• 2007

본 연구에서는 ITO/PEDOT:PSS/PFO:MEH-PPV/LiF/Al의 구조를 갖는 고분자 유기발광다이오드를 제작하여 정공 주입층으로 사용되는 PEDOT:PSS의 두께 변화와 PVK 정공 수송층을 도입하여 ITO/PEDOT:PSS/PVK/PFO:MEH-PPV/LiF/Al 구조를 갖는 고분자 유기발광 다이오드를 제작하여 정공수송층이 유기발광다이오드의 전기 광학적 특성에 미치는 영향에 대하여 조사, 비교하였다. 실험에 사용된 모든 유기물은 플라즈마 처리된 ITO/glass 기판위에 스핀 코팅법으로 도포하였다. 정공 주입층인 PEDOT:PSS 두께를 약 80 nm에서 50 nm로 감소한 경우 PLED 소자의 휘도는 약 $220cd/m^2$ 에서 $450cd/m^2$으로 크게 증가하였다. 이러한 결과는 정공 주입층의 두께가 감소할수록 ITO 전극에서 발생한 정공이 보다 쉽게 발광막으로 전달되기 때문이다. 또한 PVK 정공 수송층을 도입한 PLED소자에서 최대 전류밀도와 휘도는 $268mA/cm^2$ 와 $540cd/m^2$ (at 12V)의 값을 각각 나타내었다. PVK 정공 수송층이 도입되지 않은 소자에 비해 전류밀도는 약 14%, 휘도는 약 22%의 특성개선을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.76-79
• /
• 1996

Polypyrrole films were electrochemically synthesized under a constant current condition ranging from 50 ${\mu}$A/$\textrm{cm}^2$ to 2 mA/$\textrm{cm}^2$ with resultant high electrical conductivity about 100 S/cm. Specific energy of 70 Wh/kg and Ah efficiency of 97% were achieved during the cycling using liquid electrolyte system. On the other hand, consequences of the cycling were 51 Wh/kg and 95% using PEO$\sub$8/LiClO$_4$PC$\sub$5/EC$\sub$5/ solid electrolyte system. Polypyrrole film can be cycled stable and Ah efficiency is excellent, so it can be applicable to the cathode of Lithium secondary batteries.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.582-588
• /
• 2009

Direct electron transfer of hemoglobin (Hb) in the chitosan (CTS) and $TiO_2$ nanoparticles (nano-$TiO_2$) composite films was achieved by using a room temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate ($BMIMPF_6$) modified carbon paste electrode (CILE) as the basal electrode. UV-Vis and FT-IR spectroscopy indicated that Hb in the film retained the native structure. Electrochemical investigation indicated that a pair of well-defined quasi-reversible redox peaks of Hb heme Fe(III)/Fe(II) was obtained with the formal potential located at -0.340 V (νs. SCE) in pH 7.0 phosphate buffer solution (PBS). The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n) and the standard electron transfer rate constant ($k_s$) were got as 0.422, 0.93 and 0.117 $s^{-1}$, respectively. The fabricated CTS/nano-$TiO_2$/Hb/CILE showed good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) and hydrogen peroxide ($H_2O_2$), which exhibited a potential application in fabricating a new kind of third generation biosensor.

• Membrane and Water Treatment
• /
• 제9권4호
• /
• pp.211-220
• /
• 2018

Incorporating nano-materials in thin-film composite (TFC) membranes has been considered to be an approach to achieve higher membrane performance in various water treatment processes. This study investigated the rejection efficiency of three target compounds, i.e., reserpine, norfloxacin and tetracycline hydrochloride, by TFC membranes with different graphene oxide proportions. Graphene oxide (GO) was incorporated into the polyamide active layer of a TFC membrane via an interfacial polymerization (IP) reaction. The TFC membranes were characterized with FTIR, FE-SEM, AFM; in addition, the water contact angle measurements as well as the permeation and separation performance were evaluated. The prepared GO-TFC membranes exhibited a much higher flux ($3.11{\pm}0.04L/m2{\cdot}h{\cdot}bar$) than the pristine TFC membranes ($2.12{\pm}0.05L/m2{\cdot}h{\cdot}bar$) without sacrificing their foulant rejection abilities. At the same time, the GO-modified membrane appeared to be less sensitive to pH changes than the pure TFC membrane. A significant improvement in the anti-fouling property of the membrane was observed, which was ascribed to the favorable change in the membrane's hydrophilicity, surface morphology and surface charge through the addition of an appropriate amount of GO. This study predominantly improved the understanding of the different PA/GO membranes and outlined improved industrial applications of such membranes in the future.

• 한국재료학회지
• /
• 제10권11호
• /
• pp.755-759
• /
• 2000

RF magnetron sputtering법으로 초미세결정 Fe-Sm-O계의 박막을 상온에서 제작하여 산소분압에 따른 포화자화, 보자력, 고주파에서의 투자율(100MHz)을 조사하였다. 최적조건인 5%의 산소분압에서 제조한 초미세결정 Fe(sub)83.4Sm(sub)3.4O(sub)13.2박막은 포화자속밀도 18kG, 보자력 0.82 Oe, 실효투자율 (0.5~100MHz) 2,600 이상의 우수한 연자성을 나타내었다. 산소분압이 증가함에 따라 $\alpha$-Fe 결정립의 크기가 감소하여 10%이상의 산소분압에서는 FeO가 생성되어 연자기적 성질이 열화되었다. Fe-Sm-O계 박막의 전기비저항은 산소분압이 증가함에 따라 증가하는 경향을 나타내었으며 우수한 연자기적 성질을 가지는 Fe(sub)83.4Sm(sub)3.4O(sub)13.2박막의 경우, 전기비저항은 130 $\mu$$\Omega$cm이었다. 따라서 미세하게 형성된 $\alpha$-Fe 결정립과 높은 전기비저항 때문에 초미세결정 Fe(sub)83.4Sm(sub)3.4O(sub)13.2박막이 고주파에서 우수한 연자기적 성질을 가지는 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.360-363
• /
• 2005

Biomimetic actuators composed of cellophane with an electrically conducting polyaniline(PANI) film have been fabricated and tested in air ambience conditions doped with two different counter ions such as perchlorate (${ClO_4}^-$) and tetrafluoroborate (${BF_4}^-$). Fabrication of the trilayer CP//CELLOPHANE//CP substantially enhanced the tip displacement (13.2mm) compared to the small displacement (8.3mm) of the bilaye. CP//CELLOPHANE. The ion migration among layers is the main factor behind the expansion of cellophane, while the expansion/contraction of PANI are dependent on the redox reaction of the polymer. The displacement of the composite is dominated by the humidity content. This implies that the actuation principle is possibly due to the assistance of water existing.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.235.2-235
• /
• 2003

To develop the buccal delivery system of rhEGF for the treatment of buccal mucosal ulcer, polymer films and hydrogels were investigated. Methods: Hydrogels for thermosenstive sol/gel systems were prepared by the cold method (Schmolka, 1972). And mucoadhesive films were prepared by mixing sod. alginate/polycarbophil 974p. To find an optimum buccal mucosal adhesive gel or film, the gel strength of the poloxamer and sod. alginate/polycarbophil 974p hydrogels were determined by the Simple Rheology Method and their mucoadhesiveness were measured by the Instron (M 4400, Instron Co., U.S.A.) method. (omitted)

• Journal of Information Display
• /
• 제9권3호
• /
• pp.16-22
• /
• 2008

A novel class of conjugated dendritic molecules bearing N-hexyl-substituted carbazoles as peripheral groups and various conjugative aromatic cores was synthesized through Heck coupling and the Horner-Emmons reaction. A multilayered structure of ITO/PEDOT:PSS (30 nm)/emitting material (50 nm)/BCP (10 nm)/$Alq_3$ (10 nm)/LiF (1 nm)/Al (100 nm) was employed to evaluate the synthesized dendritic materials. The electroluminescence spectrum of the multilayered device made of 3Cz predominantly exhibited blue emissions. Similar emissions were observed in the PL spectra of it's the device's thin film. The multilayered devices made of 3Cz, 3BCz, and 4BCz showed luminance values of 6,250 cd $m^{-2}$ at 24 V, 3,000 cd $m^{-2}$ at 25 V, and 1,970 cd $m^{-2}$ at 36 V, respectively. The smallest molecule, 3Cz, which bore three carbazole peripheral groups, exhibited a blue-like emission with CIE 1931 chromaticity coordinates of x = 0.17 and y = 0.21.