• Title/Summary/Keyword: $LO_x$

Search Result 71, Processing Time 0.027 seconds

Symmetry of GaAsN Conduction-band Minimum: Resonant Raman Scattering Study (GaAsN 전도띠 바닥의 대칭성: 공명라만산란연구)

  • Seong M.J.
    • Journal of the Korean Vacuum Society
    • /
    • v.15 no.2
    • /
    • pp.162-167
    • /
    • 2006
  • The symmetry of the conduction-band minimum of $GaAs_{1-x}N_{x}$ is probed by performing resonant Raman scattering (RRS) on thin layers of $GaAs_{1-x}N_{x}(x{\leq}0.7)$ epitaxially grown on Ge substrates. Strong resonance enhancement of the LO(longitudinal optical)-phonon Raman intensity is observed with excitation energies near the $E_0$ as well as $E_+$ transitions, However, in contrast to the distinct LO-phonon line-width resonance enhancement and activation of various X and L zone-boundary phonons brought about slightly below and near the $E_+$ transition, respectively, we have not observed any resonant LO-phonon line-width broadening or activation of sharp zone-boundary phonons near the $E_0$ transition. The observed RRS results reveal that the conduction-band minimum of GaAsN predominantly consists of the delocalized GaAs bulk-like states of ${\Gamma}$ symmetry.

Design of 4-Way Wilkinson Divider with Waveguide to Stripline Transition Used in The Monopulse Radar Front-end (도파관 천이 구조를 갖는 모노펄스 레이더용 4-Way 윌킨슨 분배기 설계)

  • Koh, Young-Mok;Ra, Keuk-Hwan
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.11
    • /
    • pp.69-76
    • /
    • 2010
  • From the present paper we researched about the design of 4-Way Wilkinson divider with waveguide to stripline transition which used to split the LO signal with equi-amplitude and equi-phase in the X-Band Monopulse radar RF front-end. The monopulse radar front end operating in the X-Band is composed of 3 waveguide reception mixers which down convert sum, azimuth and elevation signal to IF and one SSB waveguide mixers which generate X-Band test signal. It is required the 4-way divider with low loss, equi amplitude and equiphase splitting the LO signal to provide the LO signal to each mixer consisting RF frontend. In this paper we designed and fabricated the 4-Way Wilkinson divider with waveguide transition to divide the LO signal into equi-amplitude and equi-phase. The fabricated Wilkinson divider have the insertion loss 6.8dB, VSWR 1.06~1.28, and phase balance maximum 4.5degree for each output ports.

Pholuminescence properties of ZnO disks grown using vapor phase transport (기상 이동법으로 성장한 ZnO disk의 photoluminescence 특성)

  • Nam, Gi-Ung;Kim, Min-Su;Kim, So-A-Ram;Park, Hyeong-Gil;Yun, Hyeon-Sik;Im, Jae-Yeong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2012.05a
    • /
    • pp.238-239
    • /
    • 2012
  • ZnO disk는 Ar 가스의 ON/OFF 사이클을 사용한 기상 이동법으로 성장하였다. 온도 의존성 photoluminescence (PL)은 PL 스펙트럼의 quenching 동작을 관장하는 메커니즘을 연구하기 위해 조사하였다. ZnO disk의 12 K PL 스펙트럼에서 3.364, 3.315, 3.244, 3.212, 3.170, 3.139, 3.100 eV의 피크를 관측되었고, 그것은 각각 excitons bound to neutral donors ($D^{\circ}X$), A-line, first-order longitudinal optical (1LO) phonon replica of A-line (A-1LO), donor-to acceptor pair (DAP), A-2LO, DAP-1LO, A-3LO 이다. $D^{\circ}X$와 A-line 피크는 Varshni 공식에 의해서 피팅을 하였고, 도너 이온화 에너지는 40 meV 이었다. Free excitons, $D^{\circ}X$, A-line의 lifetime은 이론적으로 계산하였고, 온도가 증가함에 따라 lifetime이 증가하였다.

  • PDF

Design of Image Rejection SSB Modulator for X-Band Monopulse RADAR using Waveguide Hybrid Coupler (도파관 하이브리드 커플러를 이용한 X-대역 모노펄스 레이더용 이미지 제거 SSB 변조기 설계)

  • Koh, Young-Mok;Ra, Keuk-Hwan
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.48 no.6
    • /
    • pp.34-40
    • /
    • 2011
  • From the present paper researched about the Design of Image Rejection SSB Modulator for X-Band Monopulse RADAR using Waveguide Hybrid Coupler. Generally, SSB modulator mixes IF(RF) and LO signals, and then it converts to RF(IF) frequency band. In this case, in order to transmit one sideband from RF band, SSB modulator is demanded the removal of image and LO signal. The balanced mixer was designed using waveguide hybrid coupler and crystal mixer diode to mix LO and IF signal. And also the IF Amplifier was designed for IF(+) and IF(-) signal generation which have $90^{\circ}$ phase differences which are suitable in two crystal mixer diode inputs. In order to maintain a high electric reliability from high frequency band the waveguide and IF amplifier's case were manufactured with aluminum using deep brazing techniques. The test result of SSB modulator, LO and sideband signal rejection ratio were 14.2dB and 18.5dB respectively.

Implement of Broadband Resistive Mixer for X-band FMCW Radar (X밴드 FMCW 레이더용 광대역 저항성 주파수 혼합기 구현)

  • Park, Dong-Kook;Han, Tae-Kyoung
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.31 no.8
    • /
    • pp.970-974
    • /
    • 2007
  • A mixer is a key component in the wireless communication systems. In this paper, we design a mixer which is used in a frequency modulated continuous wave(FMCW) radar system. The frequency sweep range of the radar is from 10 GHz to 11 GHz. The transmitted and received signals of the FMCW radar are applied to LO and RF ports of the mixer, respectively, but the frequency difference between the two signals, which is called "a beat frequency" is under a few KHz and depending on the distance to target. Thus the isolation between the LO and RF ports is very important factor to design this mixer. In this paper we propose a single balanced resistive mixer using GaAs MESFET for this application. We first design a single-ended type resistive mixer using a simulation tool, then design a balanced type to increase the LO-to-RF isolation of the mixer. We fabricated the mixer on the substrate of dielectric constant 10 and thickness 0.635 mm. The measured results show that the isolation and conversion loss of the mixer over the frequency band is 20dB and 10.5dB, respectively. The LO input power for operating the proposed mixer is +3dBm, which is lower than a general conventional mixer's LO power. The 1 dB compression point is 6dBm.

Characteristics of the Oxygen Uptake Rate of Entomopathogenic Nematodes Steinernema spp. (곤충병원성 선충 Steinernema spp.의 산소 요구도 특성)

  • 김도완;박선호
    • Korean journal of applied entomology
    • /
    • v.38 no.2
    • /
    • pp.123-128
    • /
    • 1999
  • Recently, entomopathogenic nematodes have received a considerable attention as biologicalcontrol agents. For in vitro cultivation, storage and transportation of nematodes, oxygen supply isextremely impotant due to its limited solubility and mass transfer problem. The oxygen uptake rates(OURs) of four different Steinernema species were measured in a 5L bioreactor at varying temperatures.The OURs of the Steinernema spp. were below 0.5 x mmolO'||'&'||' . min in the range of 13-17$^{\circ}$C. TheOURs (mmo102/L - min) of S. glaseri Dongrae and S. carpocapsae Pocheon strains were 0.4 x lo-', 0.75x lo-\ulcorner at 21$^{\circ}$C, 1.5 x lo-\ulcorner, 3.2 x 10-2 at 25"C, and 2.8 x lo-', 5.8 x lo-\ulcorner at 29"C, respectively. However,the OURs were not significantly altered by the agitation speed of 50-150 rpm. The specific oxygenuptake rates (qol) of S. glaseri NC, S. glaseri Dongrae, S. glaseri Mungyeong and S. carpocapsaePocheon strains were 0.3 x 0.5 x 0.3 x and 0.2 x mmolO~/cell min at 25"C,respectively. As the nematode size and temperature were increased, the qo, was also increased.the qo, was also increased.

  • PDF

Disign of Unmanned Vehicle Control System with LoRa Network (LoRa망을 활용한 무인이동체 관제 시스템 설계)

  • Lee, Jae-Ung;Jang, Jong-Wook
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2018.10a
    • /
    • pp.44-46
    • /
    • 2018
  • In this paper, we design a system that can control unmanned mobile objects through communication between unmanned mobile object and control server system using LoRa network which is a dedicated IoT network. It is more efficient when the unmanned mobile object performs the special work by installing the LoRa network applied to the unmanned mobile object control system from the small space house or office hospital to the factory. In this paper, we will discuss the design of a system that can improve the social utilization of unmanned mobile objects by making it possible to communicate the events that occur around other mobile objects from the simplification of the navigation path.

  • PDF

Design of Double Balanced MMIC Mixer for Ku-band (Ku-band용 Double Balanced MMIC Mixer의 설계 및 제작)

  • Ryu Keun-Kwan
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.2 no.2 s.3
    • /
    • pp.97-101
    • /
    • 2003
  • A MMIC (monolithic microwave integrated circuit) mixer chip using the Schottky diode of an InGahs/CaAs p-HEMT process has been developed for the receiver down converter of Ku-band. A different approach to the MMIC mixer structure is applied for reducing the chip size by the exchange of ports between If and LO. This MMIC covers with RF (14.0 - 14.5 GHz) and If (12.252 - 12.752 GHz). According to the on-wafer measurement, the miniature (3.3X3.0 m) MMIC mixer demonstrates conversion loss below 9.8 dB, RF-to-IF isolation above 23 dB, LO-to-IF isolation above 38 dB, respectively.

  • PDF

An MMIC Broadband Image Rejection Downconverter Using an InGaP/GaAs HBT Process for X-band Application

  • Lee Jei-Young;Lee Young-Ho;Kennedy Gary P.;Kim Nam-Young
    • Journal of electromagnetic engineering and science
    • /
    • v.6 no.1
    • /
    • pp.18-23
    • /
    • 2006
  • In this paper, we demonstrate a fully integrated X-band image rejection down converter, which was developed using InGaP/GaAs HBT MMIC technology, consists of two single-balanced mixers, a differential buffer amplifier, a differential YCO, an LO quadratue generator, a three-stage polyphase filter, and a differential intermediate frequency(IF) amplifier. The X-band image rejection downconverter yields an image rejection ratio of over 25 dB, a conversion gain of over 2.5 dB, and an output-referred 1-dB compression power$(P_{1dB,OUT})$ of - 10 dBm. This downconverter achieves broadband image rejection characteristics over a frequency range of 1.1 GHz with a current consumption of 60 mA from a 3-V supply.

Temperature-dependent Photoluminescence of Boron-doped ZnO Nanorods

  • Kim, Soaram;Park, Hyunggil;Nam, Giwoong;Yoon, Hyunsik;Kim, Jong Su;Kim, Jin Soo;Son, Jeong-Sik;Lee, Sang-Heon;Leem, Jae-Young
    • Bulletin of the Korean Chemical Society
    • /
    • v.34 no.11
    • /
    • pp.3335-3339
    • /
    • 2013
  • Boron-doped ZnO (BZO) nanorods were grown on quartz substrates using hydrothermal synthesis, and the temperature-dependence of their photoluminescence (PL) was measured in order to investigate the origins of their PL properties. In the UV range, near-band-edge emission (NBE) was observed from 3.1 to 3.4 eV; this was attributed to various transitions including recombination of free excitons and their longitudinal optical (LO) phonon replicas, and donor-acceptor pair (DAP) recombination, depending on the local lattice configuration and the presence of defects. At a temperature of 12 K, the NBE produces seven peaks at 3.386, 3.368, 3.337, 3.296, 3.258, 3.184, and 3.106 eV. These peaks are, respectively, assigned to free excitons (FX), neutral-donor bound excitons ($D^{\circ}X$), and the first LO phonon replicas of $D^{\circ}X$, DAP, DAP-1LO, DAP-2LO, and DAP-3LO. The peak position of the FX and DAP were also fitted to Varshni's empirical formula for the variation in the band gap energy with temperature. The activation energy of FX was about ~70 meV, while that of DAP was about ~38 meV. We also discuss the low temperature PL near 2.251 eV, related to structural defects.