• Journal of Species Research
• /
• v.9 no.4
• /
• pp.413-426
• /
• 2020

The Euphorbiaceae family features some of the most economically important plants that are sources of foods, oils, waxes, and medicines. The accurate identification of Euphorbiaceae species is critical in sustainable utilization of plant resources. We examined 234 sequences of nrDNA ITS, cpDNA rbcL and matK loci from 20 species in Euphorbiaceae in Korea and three outgroup taxa to develop efficient DNA barcodes. The three barcode loci were successfully amplified and sequenced for all Euphorbiaceae species. nrDNA ITS locus showed the highest mean interspecific K2P distance (0.3034), followed by cpDNA matK (0.0830), and rbcL (0.0352) locus. The degree of species resolution for individual barcode loci ranged from 75% (rbcL and matK) to 80% (ITS). The degree of species resolution was not enhanced with the different combinations of three barcode loci. The combined data set of the three loci(ITS+rbcL+matK) provided 80% of species resolution. These results confirm that ITS locus, as a single barcode, is the best option for barcoding of the Euphorbiaceae in Korea.

• YAKHAK HOEJI
• /
• v.51 no.6
• /
• pp.409-414
• /
• 2007

Acetylcholinesterase (AChE) plays a role in the progression of Alzheimer's disease (AD). In this study, we examined the improving effect of L-theanine, a major amino acid in Japanese green tea (Camellia sinensis) on the scopolamine (1 mg/kg/mouse)-induced memory dysfunction in mice. Treatment with L-theanine (2, 4 mg/kg/mouse p.o.) in the drinking water for 7 days reversed the scopolamine-induced latency time and distance in the water maze test, latency time in the passive avoidance test, and inhibited AChE activity. This study suggests that L-theanine may be a useful agent for prevention of progression of AD.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.13 no.1
• /
• pp.7-15
• /
• 1983

The purpose of this study was to investigate the radiographic images of the condylar head in clinically normal subjects and the TMJ patients using standardized projection technique. 45 subjects who have not clinical evidence of TMJ problems and 96 patients who have the clinical evidence of TMJ problems were evaluated, but the patients who had fracture, trauma and tumor on TMJ area were discluded in this study. For the evaluation of radiographic images, the author has observed the condylar head positions in closed mouth and 2.54㎝ open mouth position taken by the standardized transcranial oblique lateral projection technique. The results were as follows: 1. In closed mouth position, the crest of condylar head took relatively posterior position to the deepest point of the glenoid fossa in 8.9 % of the normals and in 26.6% of TMJ patients. 2. In 2.54㎝ open mouth position, condylar head took relatively posterior position to the articular eminence in 2.2% of TMJ patients and 39.6% of the normals. 3. In open mouth position, the horizontal distance from the deepest point of the glenoid fossa to the condyla head was 13.96㎜ in the normals and 10.68㎜ in TMJ patients. 4. The distance of true movement of condyalr head was 13.49㎜ in the normals and l0.27㎜ in TMJ patients. 5. The deviation of mandible in TMJ patients was slightly greater than that of the normals.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.6
• /
• pp.229-235
• /
• 2002

This paper presents the fabrication of polycrystalline thin film transistor(TFT) using sequential lateral solidification(SLS) of amorphous silicon. The fabricated SLS TFT showed high Performance suitable for active matrix liquid crystal display(AMLCD). The SLS process involves (1) a complete melting of selected area via irradiation through a patterned mask, and (2) a precisely controlled pulse translation of the sample with respect to the mask over a distance shorter than the super lateral growth(SLG) distance so that lateral growth extended over a number of iterative steps. The SLS experiment was performed with 550$\AA$ a-Si using 308nm XeCl laser having $2\mu\textrm{m}$ width. Irradiated laser energy density is 310mJ/$\textrm{cm}^2$ and pulse duration time was 25ns. The translation distance was 0.6$\mu$m/pulse, 0.8$\mu$m/pulse respectively. As a result, a directly solidified grain was obtained. Thin film transistors (TFTs) were fabricated on the poly-Si film made by SLS process. The characteristics of fabricated SLS p -type poly-Si TFT device with 2$\mu\textrm{m}$ channel width and 2$\mu\textrm{m}$ channel length showed the mobility of 115.5$\textrm{cm}^2$/V.s, the threshold voltage of -1.78V, subthreshold slope of 0.29V/dec, $I_{off}$ current of 7$\times$10$^{-l4}$A at $V_{DS}$ =-0.1V and $I_{on}$ / $I_{off}$ ratio of 2.4$\times$10$^{7}$ at $V_{DS}$ =-0.1V. As a result, SLS TFT showed superior characteristics to conventional poly-Si TFTs with identical geometry.y.y.y.

• Journal of Computing Science and Engineering
• /
• v.7 no.2
• /
• pp.99-111
• /
• 2013

Approximating a divergence between two probability distributions from their samples is a fundamental challenge in statistics, information theory, and machine learning. A divergence approximator can be used for various purposes, such as two-sample homogeneity testing, change-point detection, and class-balance estimation. Furthermore, an approximator of a divergence between the joint distribution and the product of marginals can be used for independence testing, which has a wide range of applications, including feature selection and extraction, clustering, object matching, independent component analysis, and causal direction estimation. In this paper, we review recent advances in divergence approximation. Our emphasis is that directly approximating the divergence without estimating probability distributions is more sensible than a naive two-step approach of first estimating probability distributions and then approximating the divergence. Furthermore, despite the overwhelming popularity of the Kullback-Leibler divergence as a divergence measure, we argue that alternatives such as the Pearson divergence, the relative Pearson divergence, and the $L^2$-distance are more useful in practice because of their computationally efficient approximability, high numerical stability, and superior robustness against outliers.

• Clinics in Shoulder and Elbow
• /
• v.1 no.2
• /
• pp.175-179
• /
• 1998

The acromioclavicular joint is commonly affected by traumatic and degenerative conditions. Most injuries are due to direct trauma, such as a fall on the shoulder. Although there is general agreement on treatment of type I, Ⅱ, Ⅳ, V and VI acromioclavicular injuries, the treatment of type Ⅲ injuries remains controversial. Sixty patients, ranging in age from 19 to 57 years(average, 32), were evaluated an average of 57.5 (range, 13 to 96) months after surgical reconstruction for Rockwood type Ⅲ Ⅳ, V acromioclavicular dislocation. Phemister method (47 cases), Bosworth (3 cases), Weaver and Dunn method (10 cases) were used to correct displacement. An increase of the coracoclavicular distance of the injured shoulder over the normal shoulder was average 7.1㎜ at initial, average l㎜ on postoperatively, and average 2㎜ at follow-up. Overall, 54 of 60(90%) patients achieved satisfactory results. Degree of increase of the coracoclavicular distance has no inliluence to clinical results.

• Journal of Mechanical Science and Technology
• /
• v.16 no.12
• /
• pp.1693-1701
• /
• 2002

The intermittent spray characteristics of a multi-hole and a single-hole diesel nozzle were experimentally investigated. The hole number of the multi-hole nozzle was 5, and the hole diameter of the 5-hole and the single-hole nozzle was the same as d$\_$n/=0.32 ㎜ with the constant hole length to diameter ratio(l$\_$n//d$\_$n/=2.81). The droplet diameters of the spray, including the time-resolved droplet diameter, SMD (Sauter mean diameter) and AMD (arithmetic mean diameter) , injected intermittently from the two nozzles into the still ambient were measured by using a 2-D PDPA (phase Doppler particle analyzer). Through the time-resolved evolutions of the droplet diameter, it was found that the structure of the multi-hole and the single-hole nozzle spray consisted of the three main parts : (a) the leading edge affected by surrounding air. and composed of small droplets; (b) the central part surrounded by the leading edge and mixing flow region and scarcely affected by the resistance of air, (c) the trailing edge formed by the passage of the central part. The SMD decreases gradually with the increase in the radial distance, and the constant value is obtained at the outer region of the radial distance (normalized by hole diameter) of 7-8 and 6 for the 5-hole and single-hole nozzle, respectively. The SMD along the centerline of the spray decrease shapely with the increase in the axial distance after showing the maximum value near the nozzle tip. The SMD remains the constant value near the axial distance(normalized by hole diameter) of 150 and 180 for the 5-hole and the single-hole nozzle, respectively.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.109-116
• /
• 2007

The present study examined mechanical properties according to the change of outer circumference in the friction welding of A2024-T4 stock, which is used much as aircraft structure, truck wheel, stainless materials and A2024-T4 stock with 10 hollow at the center. Welding conditions were fixed at RPM 2,000rpm, friction pressure of 50MPa, friction time of 1.5sec, upset pressure of 120MPa and upset time of 2.0 seconds. From the result of this study were drawn conclusions as follows : According to the result of a tensile strength test, the solid shaft showed linear increase of tensile strength with the change of outer circumference, the hollow shaft showed maximum tensile stength when the length (L) was 2mm and decrease of tensile strength with the change of outer circumference, hardness appeared to increase and then decrease for welding interface, and it showed maximum hardness 155Hv at L=5mm of the solid shaft. Bending strength increased linearly far change of the distance (L) of outer circumference in the solid shaft and then decreased linearly in the hollow shaft. the result of examining tissue, the tissue grew finer around the welding interface and divided the basic material and the welding surface.

• Journal of Sensor Science and Technology
• /
• v.23 no.6
• /
• pp.409-415
• /
• 2014

We had presented an inductive type intraocular pressure sensor (L-sensor) in previous work. The distance between a micro coil and a ferrite on the membrane was modulated by pressure, and as a result the inductance and resonant frequency were changed. However, L-sensor has some problems to implant in eyes. First problem is low sensitivity. When L-sensor was implanted in rabbit's eyes, resonant frequency of L-sensor was very hard to detect. Second problem is biocompatibility. Size of L-sensor is $6{\times}7{\times}1.2mm$. When L-sensor was implanted in the eyes, it caused the inflammation. Therefore, this study suggests an inductive and capacitive type IOP sensor (LCsensor). The sensitivity of the LC-sensor 27.3 kHz/mmHg under 60mmHg. It is much larger than 14 kHz/mmHg of the L-sensor. And the size of LC-sensor is 47% smaller than L-sensor. After 2 weeks from the implantation of LC-sensor into rabbit eyes, we measured the changes of resonant frequency of LC-sensor according to increased IOP by Balanced Salt Solution (BSS) injection. As a result, the sensitivity of LC-sensor in in vivo test is 25 kHz/mmHg. That is similar to the sensitivity of in vitro test.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.543-548
• /
• 2006

This paper is to be researched into ozone generation character of Bi-Ti-Si type high dielectric ceramic catalyst discharge tube. And conditions of basic experiment are the outside diameter of discharge tube : 52 mm, the length of discharge tube : 350 mm, the frequence : 900 Hz, the temperature of cooling water : $25^{\circ}C$, quantity of flow : 5, 10, 20 L/min, pressure : 1.2, 1.4, 1.6 atm, and distance of discharge gap : 0.4, 0.6, 0.8 mm. Ozone generation characteristics were measured to consumption power. At quantity of flow : 20 L/min, discharge gap : 0.6 mm, pressure : 1.6, and consumption power : 150 W, Maximum ozone generation efficiency of 175 g/kWh was obtained. And a range of maximum ozone generation efficiency was measured below the flow quantity of 20 L/min at below pressure of 1.6 atm. However, Maximum ozone generation efficiency was measured over the flow quantity of 20 L/min at over pressure of 1.6 atm.