• 한국재료학회지
• /
• 제9권5호
• /
• pp.478-483
• /
• 1999

The effects of the composition on the consolidation temperature and refractive index of the glass thin film fabricated by aerosol flame deposition method in SiO$_2$-B$_2$O$_3$-CaO-P$_2$O\ulcorner system were investigated. When the amount of CaO was constant in SiO$_2$-B$_2$O$_3$-CaO system the consolidation temperature of glass thin film decreased with increasing the amount of B$_2$O$_3$. Also, when the amount of SiO$_2$ and B$_2$O$_3$ was constant the consolidation temperature of glass thin film increased with increasing the amount of CaO. P$_2$O\ulcorner was added to 72.5SiO$_2$-25B$_2$O$_3$-2.5CaO in order to decrease its consolidation temperature. As the amount of P$_2$O\ulcorner increased its consolidation temperature decreased and the refractive index linearly increased from 1.4649 to 1.4684. When the amount of CaO and P$_2$O\ulcorner was constant in SiO$_2$-B$_2$O$_3$-CaO-P$_2$O\ulcorner system the consolidation temperature of glass thin film decreased with increasing the ratio of SiO$_2$/B$_2$O$_3$.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.824-827
• /
• 2006

The Prefabricated Vertical Drains (PVDs) method is one of the most widely used techniques to accelerate the consolidation process in-situ and hence increase its bearing capacity. In this paper, the degree of consolidation incorporated with PVDs was evaluated in O construction work site which composed with dredged soil. O Program PVD(Version 2.3) which developed by Asian Institute of Technology was used. The purpose of this analysis is efficiently to estimate the degree of consolidation by analyzing the surface settlement with time, and drainage at initial stage and final stage by using design-parameter which based on the in-situ tests and laboratory tests. This result can be compared with analysis of the degree of consolidation using Program PVD(Version 2.3) and the field observed data in the future studies.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.7-18
• /
• 2002

일반적으로 자연상태의 흙은 일차원 압밀을 받고 있으므로 등방압밀시료와는 그 거동양상이 상이하게 나타난다. 그러나 대부분의 실내시험에서는 실험상의 어려움과 시험장비의 부족으로 인하여 주로 등방시험을 통한 연구가 실시되고 있는 것이 현실이다. 따라서 비교적 간단한 등방 삼축 압축시험 결과로부터 $K_o$상태의 간극수압 및 비배수 전단강도를 추정할 수 있다면 매우 효과적이라 할 수 있을 것이다. 본 연구에서는 재성형된 이암풍화토를 이용하여 등방삼축압축시험과 $K_o$ 삼축압축시험을 실시하고, 쌍곡선 모델을 적용하여 간극수압비에 관련된 상수를 도출하였다. 그리고 Lo(1969)가 제안한 식을 적용하여 등방시험에서 얻어진 간극수압의 결과로부터 Ko 시험시 발생하는 간극수압의 거동을 예측함으로써 Lo(1969)식의 타당성을 검토하였다. 또한 압밀방법에 따른 비배수 전단강도를 함수비와 연관지어 살펴봄으로서 압밀방법이 전단강도에 미치는 영향을 파악하였다. 끝으로 한계상태 개념에 기초한 Wroth(1984)을 식을 적용하여 등방시험시의 비배수 전단강도로 부터 $K_o$ 상태의 비배수 전단강도를 예측하고 그 결과를 실험치와 비교함으로서 식의 유용성을 검증하였다.

• 한국분말재료학회지
• /
• 제7권4호
• /
• pp.237-243
• /
• 2000

The property and performance of the $Al_2O_3/Ni$ nanocomposites have been known to strongly depend on the structural feature of Ni nanodispersoids which affects considerably the structure of matrix. Such nanodispersoids undergo structural evolution in the process of consolidation. Thus, it is very important to understand the microstructural development of Ni nanodispersoids depending on the structure change of the matrix by consolidation. The present investigation has focused on the growth mechanism of Ni nanodispersoids in the initial stage of sintering. $Al_2O_3/Ni$ powder mixtures were prepared by wet ball milling and hydrogen reduction of $Al_2O_3$ and Ni oxide powders. Microstructural development and the growth mechanism of Ni dispersion during isothermal sintering were investigated depending on the porosity and structure of powder compacts. The growth mechanism of Ni was discussed based upon the reported kinetic mechanisms. It is found that the growth mechanism is closely related to the structural change of the compacts that affect material transport for coarsening. The result revealed that with decreasing porosity by consolidation the growth mechanism of Ni nanoparticles is changed from the migration-coalescence process to the interparticle transport mechanism.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.669-676
• /
• 2000

The estimation of consolidation rate is one of the important factors in the construction on soft clayey deposits. A number of researches are carried out to predict the consolidation behavior in field, however, most of the results show the discrepancies between the prediction and observation. This paper analyzes consolidation behavior of normally consolidated clay in K/sub o/ condition with 2-dimensional drainage by use of the numerical methods. Elastic and elastic-plastic finite element analyses are compared in terms of the dissipation of excess pore pressure. These results are also compared with Terzaghi-Rendulic's equation that is implemented by finite difference method. The consolidation time calculated by using elastic model is found to be similar to the result of Terzaghi-Rendulic's equation. The consolidation predicted by MCC model takes more time than other cases. Initial increase of excess pore pressure in radial drainage can be shown, however, this phenomenon does not have a significant effect on tile final consolidation time.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.967-968
• /
• 2006

This research reports for the successful consolidation of $Al_2O_3$ powder with retained ultra-fine structure using MPC and sintering. Measurements in the consolidated $Al_2O_3$ bulk indicated that hardness, fracture toughenss, and breakdown voltage have been much improved relative to the conventional polycrystalline materials. Finally, optimization of the compaction parameters and sintering conditions will lead to the consolidation of $Al_2O_3$ nanopowder with higher density and even further enhanced mechanical properties.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.71-78
• /
• 2000

SHANSEP method involves the consolidation to stresses in excess of the preconsolidation pressure in order to overcome sample disturbance effect. The concept of SHANSEP is based on an approach to laboratory test which attempts to reproduce the in-situ conditions more closely than is possible in routine tests and evaluates normalized strength parameters for the soil as a function of OCR. But SHANSEP method can be applied only to fairly uniform clay deposits, and is unsuitable for a random deposit. In this study, CK/sub o/U triaxial compression test and incremental loading consolidation test were performed for the application of SHANSEP method on Yangsan clay. During the K/sub o/-consolidation, triaxial specimens were consolidated to stress equal to two times the in-situ vertical effective stress. And for overconsolidated condition, the specimens were swelled to a known vertical effective stress in order to have the desired OCR. With the results of CK/sub o/U triaxial compression test using the block samples, the relationship between c/sub u//σ/sub vc/' and OCR on Yangsan clay was established. For evaluating the undrained shear strength of Yangsan clay with depth, CK/sub o/U triaxial compression test was performed using the piston samples taken from Yangsan site. And also undrained shear strength was analyzed from the in-situ test such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that of CK/sub o/U triaxial compression test.

• 한국지반공학회논문집
• /
• 제27권10호
• /
• pp.45-54
• /
• 2011

본 연구에서는 세립토인 카올리나이트와 매립석탄회를 혼합하여 일반적인 준설토와 매립석탄회를 혼합한 매립지반의 압밀특성을 살펴보았다. 인공 혼합토를 성형하기 위하여 퇴적 토조를 제작하여 카올리나이트 슬러리에 석탄회를 30% 혼합하여 동일한 응력이력을 가지는 시료를 성형하였다. 매립지반의 연직방향과 횡방향의 압밀 및 압축 특성을 알아보기 위하여 표준압밀시험과 Rowe Cell 압밀시험을 수행하였다. 표준압밀시험 시험 결과, 점토 시료에 비하여 매립석탄회를 같이 혼합하는 것이 낮은 압축성과 높은 압밀계수틀 갖게 되어 매립지반의 조기 안정화에 도움을 줄 수 있을 것으로 판단된다. 또한 연직배수재 설치시 횡방향 압밀 특성을 파악하기 위하여, Rowe cell 시휘에서 연직배수재를 설치하여 암밀시험을 수행하였다. Rowe cell 시험결과, 혼합토의 횡방향 압밀계수 또한 순수 카올리나이트 시료에 비하여 높은 값을 나타내어 매립회의 혼합이 압밀시간을 단축시킬 수 있는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2853-2865
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it takes a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20 mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one, and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1992년도 가을학술발표회 논문집
• /
• pp.121-130
• /
• 1992

Assessement of comsolidation characteristics of soft soil is very important in the project of soft soil improvement. In the design step, the consolidation characteristics of soil is determined by the laboratory tests (typically oedometer test), generally. But there is big differences between the condition of laboratory test and the condition of field(in situ). the differences results in the considerable difference between the predicted and measured consolidation behavior. This article analyzed the consolidation data of the "SOFT SOIL IMPROVEMENT PROJECT of the 2nd Namdong Industrial Complex at Inchon". The project was improving the road way net work in the 2nd Namdong Industrial Complex by preloading and sand pile method. Field instrumentation was performed at 10 points which consist of pneumatic piezometers, magnetic probe extensometers, inclinometers and electronic dipmeter. The results showed that there is big difference in the laboratory predicted consolidation behavior and field consolidadion behavior. Also there was big difference in the settlement behavior and pore pressure behavior. This article investigated the above factors by comparing the settlement, pore pressure and strength at different conditions.onditions.