• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.38-43
• /
• 2013

In this study we aims to examine the effects of $Co_3O_4$ and NiO doping on the defects and electrical properties in ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5) varistors. It seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.20 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects in Co and Ni co-doped ZBS system, however only ${V_o}^{\cdot}$ appeared in Co- or Ni-doped ZBS. Even though the same defects it was different in capacitance (1.5~4.5 nF) and resistance ($0.3{\sim}9.5k{\Omega}$). The varistor characteristics were improved with Co and Co+Ni doping (non-linear coefficient, ${\alpha}$= 36 and 29, relatively) in ZBS. The various parameters ($N_d=1.43{\sim}2.33{\times}10^{17}cm^{-3}$, $N_t=1.40{\sim}2.28{\times}10^{12}cm^{-2}$, ${\Phi}b$=1.76~2.37 V, W= 98~118 nm) calculated from the C-V characteristics in our systems did not depend greatly on the type of dopant, which were in the range of a typical ZnO varistors. It should be derived a improved C-V equation carefully for more reliable parameters because the variation of the varistor capacitance as a function of the applied dc voltage is depend on the defect, frequency, and temperature.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.129-134
• /
• 1999

This study is related to the investigation of the direct incorporation of $CO_2$ to polymer using quaternary ammonium salt catalysts. Quaternary ammonium salts showed good catalytic activity of $CO_2$ fixation in the synthesis of poly[(1,3-dioxolane-2-oxo-4-yl)methyl methacrylate] [poly(DOMA)] by the direct incorporation of $CO_2$ to poly(glycidyl methacrylate)[poly(GMA)]. Among the salts tested, the ones with higher alkyl chain length and with more nucleophilic counter anion showed higher catalytic activity. The yield of carbon dioxide addition increased with the reaction temperature. Kinetic study was carried out by measuring the variation of $CO_2$, pressure in a high pressure batch reactor. The reaction rate was first order to the concentration of poly(GMA) and $CO_2$, respectively. The rate constant was $0.69L/mol{\cdot}h$ and Henry's constant of $CO_2$ in DMSO at $80^{\circ}C$ was $6.8{\times}10^{-4}mol/L{\cdot}KPa$.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.420-425
• /
• 2012

The new organic semiconductors which are composed of divinylbenzene core unit and alkoxynaphthalene on both sides, 1,4-bis-2-(6-octyloxy)naphthalen-2-ylvinylbenzene (BONVB), 1,4-bis-2-(6-decyloxy)naphthalen-2-ylvinylbenzene (BDNVB) and 1,4-bis-2-(6-dodecyloxy)naphthalen-2-ylvinylbenzene (BDDNVB) were synthesized by Wittig reaction. The structures of obtained BONVB, BDNVB and BDDNVB were confirmed by FT-IR and mass spectroscopy. UV-absorption of thin film showed H-aggregates and J-aggregates due to closely packed structure between adjacent molecules. The characterization of vacuum-evaporated films by Xray diffraction (XRD) and atomic force microscopy (AFM) showed that the chain length of alkoxy group affects the crystallinity and morphology. BONVB with octyloxy group showed the mobility of $0.011cm^2/V{\cdot}s$, on/off ratio of $1.31{\times}10^5$, and a subthreshold slope of 0.93 V.

• Journal of Plant Biotechnology
• /
• v.38 no.3
• /
• pp.221-227
• /
• 2011

This study was carried out to determine optimal medium conditions for mass propagation by bioreactor culture of ever-bearing strawberry (Fragaria ${\times}$ ananassa D.). Two different type of nitride were that mixed $NH_4NO_3$ and $KNO_3$ or added $KNO_3$ only. And nitride concentrations were at the 4 levels of $1/2{\times}$, $1{\times}$, $2{\times}$ and $3{\times}$ that was included $NH_4NO_3$ and $KNO_3$. Sucrose content ranged at 3 levels of $10g{\cdot}L^{-1}$, $20g{\cdot}L^{-1}$ and $30g{\cdot}L^{-1}$ and medium pH were at the 3 levels of 4.6, 5.6 and 6.6. In bioreactor culture, medium that are included $NH_4NO_3$ and $KNO_3$ together in MS medium was suitable for mass propagation. Medium EC rose rapidly when the nitride concentration was increased. For that reason, plantlet growth was inhibited. Shoots of nitride $1/2{\times}$ concentration was 10.8 ea and $1/2{\times}$ concentration was suitable for shoot propagation. Fresh weight of sucrose $30g{\cdot}L^{-1}$ was 3,101 mg which was heaviest and aerial and ground part were higher than the other concentration. Shoots were increased in proportion to the increasing concentration of sucrose. In the pH condition, from pH 5.6 to 6.8 were appropriate for the optimum growth of aerial and ground part of plant. From the results, in bioreactor culture for mass propagation, MS medium was suitable $1/2{\times}$ concentration that was included $NH_4NO_3$ and $KNO_3$ together, and added $30g{\cdot}L^{-1}$ of sucrose, and then adjusted pH between 5.6 and 6.6.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.300-308
• /
• 2004

The formation mechanism of anodic oxide films on Mg alloys when anodized in NaOH solution. was investigated by focusing on the effects of anodizing potential. Al content. and anodizing time. Pure Mg and Mg-Al alloys were anodized for 10 min at various potentials in NaOH solutions. $Mg(OH)_2$ was generated by an active dissolution reaction at the surface. and the product was affected by temperature. The intensity ratio of $Mg(OH)_2$ in the XRD analysis decreased with increasing applied potential. while that of MgO increased. The anti-corrosion properties of anodized specimens at each constant potential were better than those of non-anodized specimens. The specimen anodized at an applied potential of 3 V had the best anti-corrosion property. And the intensity ratio of $Mg_{17}Al_{12}$/Mg increased with aluminum content in Mg-Al alloys. During anodizing. the active dissolution reaction occurred preferentially in ${\beta}\;phase(Mg_{17}Al_{12})$ until about 4 mins. and then the current density increased radually until 7 mins. The dissolution reaction progressed in a phase(Mg) which not formed the intermetallic compound. which had a lower Al content. In the anodic polarization test of $0.017\;mol{\cdot}dm^-3$ NaCl and $0.1\;mol{\cdot}dm^-3\;Na_2SO_4$ at 298 K. the current density of Mg-15 mass% Al alloy anodized for 10 mins increased. since the anodic film that forms on the a phase is a non-compacted film. The anodic film on the phase for 30 mins was a compact film as compared with that for 10 mins.

• Korean Journal of Crystallography
• /
• v.17 no.2
• /
• pp.41-45
• /
• 2006

The complex $cis-[Co(13-aneN_4)(N_3)_2]Cl\cdot H_2O$ (1) (13-ane$N_4$ = 1,4,7,10-tetraazacyclotridecane) has been synthesized and structurally characterized by X-ray crystalloaraphy. It crystallizes in the orthorhombic system Pbca, a = 7.8282(4) ${\AA}$, b = 14.3197(7) ${\AA}$, c = 29.9021(15) ${\AA}$, V = 3351.9(3) ${\AA}^3$, Z = 8. The cobalt(III) ion in 1 is coordinated to four nitrogen atoms from the macrocycle and two azide ligands of cis position in a distorted octahedral environment, which forms the 1D polymer through hydrogen bonding contacts involving the cation, chloride anion and solvent water molecules.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.585-590
• /
• 2015

This study was conducted to improve the acclimatization rate of in vitro strawberry plantlets through bioreactor culture using the growth retardant flurprimidol. Different concentrations [0 (Control), 0.1, 0.5, 1.0, and $2.0mg{\cdot}L^{-1}$] of flurprimidol were added during bioreactor culture. After six weeks of treatments, various growth characteristics were investigated and in vitro plantlets were acclimated in the greenhouse. The growth rate of treated plantlets was much lower than that of control, and as the treatment concentration increased, the growth rate was much decreased. Shoots of plantlets treated with flurprimidol were shorter (2.2-3.7 cm) than those of control (7.9 cm). The number of roots per treated plant was around 11.6-34.2, compared with 51.8 in the control. Root length was also lower (0.88-3.08 cm) than control (4.36 cm). However, the number of new shoots and leaves increased in all treatments except for $2.0mg{\cdot}L^{-1}$ concentration. The root was partially decayed in $1.0mg{\cdot}L^{-1}$ concentration and was completely decayed in $2.0mg{\cdot}L^{-1}$. The survival rate in $0.1mg{\cdot}L^{-1}$ and $0.5mg{\cdot}L^{-1}$ concentrations was 100% and 23.3% respectively. After four weeks of acclimatization, the plantlets restarted growth, and growth characteristics of shoots and roots recovered to the levels of control, except for fresh weight. Based on our results, a concentration of $0.1mg{\cdot}L^{-1}$ flurprimidol is appropriate for improvement of acclimatization rate of in vitro strawberry plantlets in bioreactor culture.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.153-161
• /
• 2016

This study aims to determine the optimal maturity of strawberry fruits as affected by the application of lysophosphatidylethanolamine (LPE) and its optimal concentration for postharvest stability and quality. Prior to application of treatments, fruits that were classified into levels of maturity (0%, 50%, 70% and 100%) were air-dried for 40 minutes and stored in the refrigerator at $4^{\circ}C$ for 12 days. Fruits at 70% maturity were dipped into 0, 10, 50 and $100mg{\cdot}L^{-1}$ LPE solutions for 1 minute. A lower range of concentration (0, 2.5, 5, 10 and $25mg{\cdot}L^{-1}$) was applied to fruits at different maturity levels. Data on fresh weight, hardness at vertical and horizontal loading positions, color index and sugar content during storage were collected. Based on fruits with 70% maturity dipped in LPE concentrations, there were no significant differences found on fresh weight, color index and sugar content. However, the application of $10mg{\cdot}L^{-1}$ LPE gave the highest hardness at vertical loading position while $100mg{\cdot}L^{-1}$ had the lowest average. At lower range of LPE concentrations, fresh weight was not significantly affected by LPE application and maturity levels. Hardness of fruits was mainly based on the maturity of the fruits. Increased hardness was observed in the fruits with 70% maturity dipped into the $5mg{\cdot}L^{-1}$ of LPE solution. The hardness and Hunter's $L^*$ and $b^*$ value of 100% matured fruits gave lowest values despite the application of $25mg{\cdot}L^{-1}$ LPE 12 days after storage.

• Journal of the Korean Ceramic Society
• /
• v.44 no.1 s.296
• /
• pp.65-69
• /
• 2007

For self-developed alkali-alkaline earth-silicate and commercial glass melts for plasma display panel substrate, the corrosion behavior of fused casting refractory consisting of $Al_2O_3-ZrO_2-SiO_2$ was examined at the temperature corresponding to $10^2\;dPa{\cdot}s$ of melt viscosity by static finger methode. The corroded refractory specimens showed a typical concave shape due to interfacial convection of melts at their flux line. However, the corrosion thickness by commercial glass melts was $6\sim10$ times comparing to that by the self?developed melts. From the view point of the glass composition and the role of alkaline earth in glass network, it was discussed the effect of alkali/alkaline earth diffusion and temperature on the refractory corrosion.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.575-581
• /
• 2006

To precipitate the complex gel of flux and aluminum hydroxides gel, aqueous solution of the mixture of $Na_2CO_3\;and\;Na_2PO_4{\cdot}12H_2O$ was added with stirring in aqueous solution of the mixture of $Al_2(SO_4)_3{\cdot}14{\sim}18H_2O,\;Na_2SO_4$, and then the complex gel was aged in $0{\sim}30h\;at\;90^{\circ}C$. As aging time passed, the aluminum hydroxides was grown into the acicular AlO(OH) gel. Also, aging time had an effect on physical properties of the AlO(OH) gel and on crystal growth of the flaky ${\alpha}-Al_2O_3$ prepared by molten-salt precipitation. In this study, the complex gel was crystallized in temperature range of $400{\sim}1,200^{\circ}C$ after drying at $110^{\circ}C$, and then it was investigated to effect of aging time on precipitation temperature, size, thickness, morphology and particle size distribution of the flaky ${\alpha}-Al_2O_3$ crystal. As aging time passed, the flaky a${\alpha}-Al_2O_3$ crystal showed a tendency toward an increase in size and thickness as result from an increase in BET surface area and pore volume of the acicular AlO(OH) gel.