• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.188-195
• /
• 2000

This study was conducted to measure the moisture content of powdered food using RF impedance spectroscopic method. In frequency range of 1.0 to 30㎒, the impedance such as reactance and resistance of parallel plate type sample holder filled with wheat flour and red-pepper powder of which moisture content range were 5.93∼-17.07%w.b. and 10.87 ∼ 27.36%w.b., respectively, was characterized using by Q-meter (HP4342). The reactance was a better parameter than the resistance in estimating the moisture density defined as product of moisture content and bulk density which was used to eliminate the effect of bulk density on RF spectral data in this study. Multivariate data analyses such as principal component regression, partial least square regression and multiple linear regression were performed to develop one calibration model having moisture density and reactance spectral data as parameters for determination of moisture content of both wheat flour and red-pepper powder. The best regression model was one by the multiple linear regression model. Its performance for unknown data of powdered food was showed that the bias, standard error of prediction and determination coefficient are 0.179% moisture content, 1.679% moisture content and 0.8849, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.394-397
• /
• 2008

In this research, the fine-structure TiO2+Ti bulks have been fabricated by the combined application of magnetic pulsed compaction (MPC) and subsequent sintering, and their densification behavior was investigated. The obtained density of $TiO_2$+Ti bulk prepared by the combined processes was increased with increasing MPC pressure from 0.7 to 1.7 GPa. Relatively higher density (88%) in the MPCed specimen at 0.7Gpa was attributed to the decreasing of the inter-particle distance of pre-compacted component. High pressure and rapid compaction by Magnetic Pulsed Compaction could reduce shrinkage rate (about 10%) of the sintered bulks compared to that of general processing (about 20%). Mixing conditions of PVA, water, Ti and $TiO_2$ nano powder for compaction of $TiO_2$ nano powder did not affect on density and shrinkage of the sintered bulks due to high pressure of MPC.

• Publications of The Korean Astronomical Society
• /
• v.14 no.2
• /
• pp.79-81
• /
• 1999

We have made an extensive mapping of the $^{13}CO$ J=1-0 transition line in the dark cloud L1535. We also constructed the $100{\mu}m$ IRAS map in the region. We found a semi-detached cloud component of $^{13}CO$ in the northeast direction of the $^{13}CO$ main cloud which forms a dumbbell-like structure. This additional component with an angular size of $20'\times16'$ has not been observed before in any molecular surveys of the cloud. The IRAS map shows a similar structure with two intensity peaks whose positions coincide with those of the $^{13}CO$ clouds.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.4
• /
• pp.445-452
• /
• 2004

Genetic diversity of sub-Saharan African goats was assessed using 19 microsatellite markers. Breeds were sampled from eastern Africa (Maasai, Kigezi, Mubende, North West Highland, Arsi-Bale), southern Africa (Ndebele, Pafuri) and West Africa (West African Dwarf, Maure, Djallonke). European breeds (Grisons Striped, Toggenburg), Asian breeds (Mongolian Cashmere, Bandipur) and a Middle East breed (Arab) were also included. The mean number of alleles per locus and average gene diversity ranged from 5.26$\pm$0.464 (Djallonke) to 7.05$\pm$0.516 (Mubende) and from 0.542$\pm$0.036 (Pafuri) to 0.672$\pm$0.031 (Ndebele), respectively. The between breeds variation evaluated using $$G_{ST}$$ and $\theta$ were found to account for 14.6% ($\theta$) and 15.7% ($$G_{ST}$$) of the total genetic variation. The $D_{A}$ measure of genetic distance between pairs of breeds indicated that the largest genetic distance was between Pafuri and Djallonke while the lowest genetic distance was between Arsi-Bale and North West Highland. A neighbour-joining tree of breed relationships revealed that the breeds were grouped according to their geographic origins. Principal component analysis supported the grouping of the breeds according to their geographic origins. It was concluded that the relationships of sub-Saharan African goat breeds were according to their geographical locations implying that the goats of eastern Africa, West Africa and southern Africa are genetically distinct. Within each sub-region, goat populations could be differentiated according to morphological characteristics.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.E2
• /
• pp.57-68
• /
• 2006

Four intensive seasonal sampling campaigns between October 1998 and October 1999 were undertaken at an urban site of Chongju, in which polyurethane foam (PUF) sampler was used to collect particulate- and vapor-phase polycyclic aromatic hydrocarbons (PAHs). The contribution to total (particulate+vapor) PAH concentration by the vapor phase component exceeded the particulate phase contribution by factor of ${\sim}2.6$. Summed concentrations of phenanthrene (30.9%), pyrene (16.6%), naphthalene (11.3%) and fluoranthene (11.0%) account for significant amounts of the vapor-phase, while chrysene (12.5%), benzo[b]fluoranthene (11.6%), indeno[123-cd]pyrene (9.9%), benzo[ghi]perylene (9.5%), benzo[k]fluoranthene (9.4%), pyrene (8.9%), and benzo[a]pyrene (8.3%) are found to be the most common PAH compounds in the particulate phase. The results from application of principal component analysis to particulate-phase PAH data demonstrate that a combination of PAH and $PM_{2.5}$ inorganic data is a more powerful tracer of emission sources than PAH species data alone. Particulate-phase PAH species were found to be associated predominantly with emissions from diesel engine vehicles and incineration.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1306-1313
• /
• 2018

The randomness and incipient nature of certain faults in reactor systems warrant a robust and dynamic detection mechanism. Existing models and methods for fault diagnosis using different mathematical/statistical inferences lack incipient and novel faults detection capability. To this end, we propose a fault diagnosis method that utilizes the flexibility of data-driven Support Vector Machine (SVM) for component-level fault diagnosis. The technique integrates separately-built, separately-trained, specialized SVM modules capable of component-level fault diagnosis into a coherent intelligent system, with each SVM module monitoring sub-units of the reactor coolant system. To evaluate the model, marginal faults selected from the failure mode and effect analysis (FMEA) are simulated in the steam generator and pressure boundary of the Chinese CNP300 PWR (Qinshan I NPP) reactor coolant system, using a best-estimate thermal-hydraulic code, RELAP5/SCDAP Mod4.0. Multiclass SVM model is trained with component level parameters that represent the steady state and selected faults in the components. For optimization purposes, we considered and compared the performances of different multiclass models in MATLAB, using different coding matrices, as well as different kernel functions on the representative data derived from the simulation of Qinshan I NPP. An optimum predictive model - the Error Correcting Output Code (ECOC) with TenaryComplete coding matrix - was obtained from experiments, and utilized to diagnose the incipient faults. Some of the important diagnostic results and heuristic model evaluation methods are presented in this paper.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.2
• /
• pp.101-105
• /
• 2004

After extrusion, cold rolling and T-6 treatment, texture development of 7x1x Al-alloy with 0.1% Sc is studied. During extrusion the very strong <111>+weak <100> fiber texture is developed, which is Influenced on the formation of rolling texture. The texture after 80% cold rolling can be described by strong{112}<111>(Cu)+{123}<634>(S) component in the cross section of the extruded rod, the strong -fiber+weak{110}<001>(Goss) components in the longitudinal section, and the strong {110}<112>(Bs)+weak{001}<100>(Cube) components in the transverse section. The components of rolling texture are remained after T-6 treatment, but the maximum density of ODF is higher. The calculated mean r-values and the planar anisotropy are relatively high, which are dependent on the texture. After T-6 treatment, recrystallized equiaxed grains with average grain size of $1{\sim}2{\mu}m$ are obtained.

• Natural Product Sciences
• /
• v.26 no.1
• /
• pp.97-107
• /
• 2020

Isolation of oils from leaves of Juniperus phoenicea and Juniperus oxycedrus was obtained by steam distillation extraction method. The compositions of essential oils (EOs) were studied by means of GC-MS and GC-FID, using the internal standard method and relative response factors. Around ninety eight compounds were determined in total, representing 98.25 g/100 g of EO of J. phoenicea and 98.48 g/100 g of EO of J. oxycedrus, respectively. The volatile leaf oils were dominated by the terpenic hydrocarbon fractions (79.87 g/100 g) and (61.27 g/100 g) characterized by high contents of α-pinene (64.6 g/100 g) and (54.0 g/100 g) in J. phoenicea and J. oxycedrus, respectively, as the main component. Also, the enantiomeric distribution of α-pinene, sabinene, camphene, δ-3-carene, β-pinene, limonene, linalool, terpinen-4-ol, bornyl acetate, and borneol in both oils is presented for the first time.

• Korean Journal of Poultry Science
• /
• v.35 no.4
• /
• pp.375-380
• /
• 2009

This study was conducted to investigate the effect of feeding induced molting on the visceral organs and blood component profile in laying hens and designed to test 400 flocks of 60 week old Leghorn laying hens for 34 weeks. A total of four molting treatment methods by including the molted with customary molting by fasting method (c), feeding single diet of corn (T1), feeding single diet of wheat bran (T2) and feeding single diet of alfalfa meal (T3) were tested, and each treatment was repeated for 5 times, and 20 laying hens were randomly assigned in an cage for each repeat. As the result of the experiment, ovary was $2.03{\sim}6%$ and oviduct was $2.51{\sim}3.47%$ in visceral organs for body weight at pre-molting term, but there was no significant difference. At post-molting, no significant difference was found, ovary was $0.25{\sim}0.41%$, uterus of control, T1, T2 and T3 was 1.12%, 0.82%, 0.48% and 0.90%, respectively. T2 was significantly lower than control, T3 (p<0.05) at the 50% of egg production. Ovary was $2.20{\sim}2.60%$ and oviduct was $2.98{\sim}3.45%$. In addition, ovary was $2.65{\sim}3.01%$, oviduct was $3.23{\sim}3.64%$ at the peak egg production, but there was no significant difference by non-feeding and feeding molting treatments. In blood component profile, cholesterol was $179.8{\sim}245.7\;mg/dL$ at pre-molting, but there was no significant difference and at post-molting, concentration of cholestrol in control, T1, T2 and T3 was 353.6, 229.1, 261.8 and 300.6 mg/dL, respectively. T1 was significantly lower than control and T3 (p<0.05). In addition, first laying day was $228.1{\sim}271.8\;mg/dL$, 50% of egg production was $236.5{\sim}284.8\;mg/dL$, there was no significant difference. Concentration of cholestrol in control, T1, T2 and T3 was 324.1, 591.6, 363.0 and 315.6 mg/dL, respectively, at the peak egg production period. T1 was significantly higher than other treatment (p<0.05).

• Korean Journal of Poultry Science
• /
• v.33 no.1
• /
• pp.49-55
• /
• 2006

An experiment was conducted to investigate the effects of feeding Bupleurum falcatum L.(BFL) on performance, blood component and hormonal secretion in broiler breeder hens. A total of 800 broiler breeder hens were allotted to four treatments(BFL ; 0, 0.5, 1.0, 2.0%) with four replications for eight weeks. Weight gain was not significantly different between the groups in growing period($20{\sim}24$ weeks), but egg production and egg mass of broiler breeder hens fed BFL were significantly(p<0.05) higher than those of the control groups in laying period($24{\sim}28$ weeks). Dietary BFL did not affect serum triglyceride concentration, whereas serum cholesterol concentration was significantly increased(p<0.05) in 2.0% BFL-fed groups. No statistical differences were found in serum glucose, Ca, P, Mg, total protein, albumin, GGT, AST, ALT and BUN concentrations. However, albumin/globulin ratio was statistically higher in BFL-fed groups compared to the control groups(p<0.05). Serum estrogen concentrations were significantly increased by feeding a diet containing 0.5% BFL, but progesterone were not influenced. Serum IGF-I of BFL groups was greater than that of control groups at 28 weeks(p<0.05). In conclusion, the results suggest that the dietary addition of BFL into broiler breeder diets improved egg production, serum estrogen and IGF-I concentration, and decreased serum cholesterol concentration and albumin/globulin ratio.