• Journal of Food Hygiene and Safety
• /
• v.33 no.3
• /
• pp.168-175
• /
• 2018

The use of microwave-assisted extraction and an acid-base clean-up process to determine the amount of methylmercury (MeHg) in marine products was suggested in order to improve the complicated sample preparation process. The optimal conditions for microwave-assisted extraction was developed by using a 10% NaCl solution as an extraction solution, setting the extraction temperature at $50^{\circ}C$, and holding for 15 minutes to extract the MeHg in marine products. A NaOH solution was selected as a clean-up substitute instead of L-cysteine solution. Overall, 670 samples of marine products were analyzed for total mercury (Hg). Detection levels were in the range of $0.0006{\sim}0.3801{\mu}g/kg$. MeHg was analyzed and compared using the current food code and the proposed method for 49 samples which contained above 0.1 mg/kg of Hg. Detection ranges of methylmercury followed by the Korea Food Code and the proposed method were $75.25(ND{\sim}516.93){\mu}g/kg$ and $142.07(100.14{\sim}244.55){\mu}g/kg$, respectively. The total analytical time of proposed method was reduced by more than 25% compared with the current food code method.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1273-1278
• /
• 2013

Novel rhodamine 6G fluorescent chemosensors 1 and 2 for the detection of transition metal cations were synthesized through the condensation of rhodamine 6G ethylenediamine with each of 2-hydroxy-1-naphthaldehyde and 2,6-pyridinedicarbaldehyde, respectively. 1 and 2 were characterized using $^{13}C$ NMR, $^1H$ NMR and mass spectroscopy. Fluorometric and colorimetric measurements involving various metal ions revealed the ring opening of the rhodamine 6G spirocycle framework. In the absence of metal cations, 2 was colorless and non-fluorescent, whereas the addition of metal cations ($Hg^{2+}$ and others) changed the color to pink, accompanied by the appearance of an orange fluorescence. The chemosensors exhibited high selectivity for $Hg^{2+}$ over other divalent first-row transition metals. The complexes of $Hg^{2+}$ with 1 and 2 were successfully isolated. A huge enhancement in the fluorescence for both one- and two-photon excitations makes these compounds suitable candidates to be used for fluorescent labeling of biological systems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.2
• /
• pp.280-288
• /
• 2003

We need refrigeration system which can maintain the freshness of agricultural products, because of being distance from a tiller to a consumer. Vacuum Pre-cooling system has an advantage in quality maintenance through vapid cooling down by using latent heat of evaporation of stored products. A number or thawing methods in current use have also several disadvantages in thawing time. discoloration mass loss caused by drying, capital costs and running cost. These damages are, it is claimed, either eliminated or improved by the vacuum thawing system. An experimental study on the pre-cooling for the bean sprouts and cabbage, and thawing for hairtail and croaker by the low temperature vacuum system were carried out. The cabbage cooling time with this Pre-cooling vacuum system took about 60 minutes to reach from $23.2^{circ}C to 4.5^{\circ}C$ at 5 mmHg abs. ($6.66\times10^{-4}$ MPa). The croaker thawing time with this low temperature vacuum thawing system took about 170 minutes to reach from $-10.3^{circ}C to -0.8^{\circ}C$ at 20 mmHg abs ($2.67\tiems10^{-3}$MPa). The vacuum Pre-cooling and thawing system have merits compared with present systems in their short intervals to cool down and to thaw without any quality losses.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.559-564
• /
• 1992

To increase the efficency of utilizing cellulosic biomass, a potent xylanase producing bacteria was isolated and identified as Bacillus sp. N-25. Extracellular xylanase from Bacillus sp. N-25 was partially purified by ammonium sulfate precipitation, DEAE-Sephadex A-25 and Sephadex G-IOO column chromatographies. The xylanase was single fraction on chromatography and was true xylanase without cellulase activity. The enzyme was stable at pH 6-8 and 80% activity was remained at $50^{\circ}C$ for 30 min, but was inhibited by $Hg^{2+}$, $Ag^{2+}$, and $Mn^{2+}$. From the fact that the major end product was xylose, we suggested that the enzyme is an exo-xylanase which may be a prime candidate for industrial use.

• The Korean Journal of Ecology
• /
• v.24 no.5
• /
• pp.297-301
• /
• 2001

The objectives of this study were to evaluate the extent of heavy metals(As, Pb, Cd, Hg)accumulated in sediments of the Kwangyang Bay, and to investigate bioaccumulation of heavy metals(As, Pb, Cd, Hg) in shellfish(Ruditapes philippinarum) commonly found in the intertidal zone of the Kwangyang Bay. The data was also compared with that of Namhae and Kohung intertidal zones, which were regarded as control stations in this study. Substantial geographical variations in heavy metal concentrations in the sediment samples were found. However, heavy metal concentrations in the sediment collected from the intertidal zones of Yochon(stations I, J) and Myodo(stations G, H) close to Yochon Industrial Area exhibited relatively higher heavy metal concentrations, compared to those from other intertidal zones(stations A, B, C) adjacent to POSCO at Kwangyang Bay. In addition, stations A, B, C showed lower heavy metal concentrations in the sediments than controls(K, L). The annual mean concentrations of the heavy metals in the shellfish from the stations(G, H, I, J) were significantly higher than those from other stations(A, B, C, D, E, F). Nevertheless, heavy metal accumulation in sediments was not reflected in bioaccumulation of heavy metals in shellfish, probably indicating that interactions between the heavy metals in sediment and shellfish might be poor in the current study area, Kwangyang Bay.

• Membrane Journal
• /
• v.16 no.2
• /
• pp.153-158
• /
• 2006

The crosslinked poly(vinyl alcohol) (PVA) mwmbranes with poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA) were used to measure the water vapor and air permeabilities at 25 and $35^{\circ}C$. In addition, the contact angles of crosslinked PVA membranes were observed and increased with PSSA-MA contents. The water vapor permeability of 15300 Baller (1 Baller=$10^{-10}cm^3(STP){\cdot}cm/cm^2{\cdot}s{\cdot}cmHg$) was shown the maximum value at $35^{\circ}C$ when PSSA-MA=7 wt% membrane was used. The gas permeability of 146 Barrer was indicated the maximum at PSSA-MA=7 wt% at $35^{\circ}C$ and $P(H_2O)/P(Air)$ was the highest value 109.2 at $25^{\circ}C$.

• Journal of Chest Surgery
• /
• v.15 no.2
• /
• pp.259-265
• /
• 1982

We have designed a new type of bubble oxygenator (KOREA-KIM VENOTHERM OXYGENATOR) made of PVC sheet and deforming mesh incorporated in the heat exchanger, and evaluated in experimental animal for the analysis of it`s efficiency. The Oxygenator has low priming volume with high flow rate up to 6 L/rain, and efficiency of heat exchanger was excellent as 1-$1.5^{\circ}C.$ using total cardiopulmonary bypass method under moderate to deep hypothermia. Average priming volume of 1317 ml with 30% hemodilution method was perfused with an average of 1.1-3.0 L/min.$M^2$of arterial blood and pure oxygen at a rate of 2-3.4 L/min for 49.6 minutes continuously in average. During total cardiopulmonary bypass, average $PaO_2$ was $159.8{\pm}60$mmHg, $PaCO_2$ $41.0{\pm}3$mmHg respectively under $SaO_2$ over 96% with systolic arterial pressure of 70 mmHg and CVP of 5-10 cm$H_2O$. Plasma free Hemoglobin was $7.0{\pm}4$ mg/dl with 25% drop of hemoglobin and hematocrit at the end of cardiopulmonary bypass. This KKV Oxygenator was observed to have excellent capabillty of oxygen and carbon dioxide gas transfer with small amount of blood trauma, and the efficiency of heat exchanger was satisfactory during cooling and rewarming of the bubbled blood. Disadvantages have included the somewhat poor deforming effect due to loose PVC fiber mesh, the extracompact character of Teflon filters, and the rough inner surface of the heat exchanger copper pipes.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.305-314
• /
• 2017

The purpose of this study was to develop the high efficiency of ginseng by using microwave low temperature vacuum drying technology. In red ginseng manufacturing processes, the study results compared the hot-air drying red ginseng dried during 24hours in $60-70^{\circ}C$ and redried during 72hours in $40^{\circ}C$ after the steaming ginseng with the red ginseng dried in microwave low temperature vacuum dryer on condition that 900 watt, 2.45 MHz, 50 mmHg during 5 hours and redried during 2 hours on 750 mmHg after the steaming ginseng about observation of tissue, sensory evaluation and a change of ginsenoside and crude saponin content. As a result, the red ginseng in microwave low temperature vacuum was had high brightness, the surface turned into porosity tissue and added more flavor, decreased bitterness highly on the contrary increased sweetness at the same time that elevated the comprehensive preference. Moreover, In a short time, the content of ginsenosides $Rg_1$ and $Rb_1$ increased about sixfold, eightfold in one time zone but there were no wide difference in content of $Rg_3$ as compared to the hot-air drying red ginseng. Finally, content of crude saponin was increased widely at 10-20 minutes and stayed high crude saponin content consistently. Therefore, this result indicated that the red ginseng in microwave low temperature vacuum increased extraction yields of the ginsenosides and crude saponin through a change of porosity tissue and improved flavor and texture compare with the general hot air dried red ginseng in a short time. According to these results, that provided that could increase the preference about red ginseng.

• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.712-720
• /
• 2013

Microwave assisted syntheses of Zn(II), Cd(II) and Hg(II) complexes with 3-aminopyridine (3AP) and nitrite ($NO_2{^-}$) ions have been reported. The metal complexes were characterized by elemental analyses, molar conductance, IR, Far-IR, electronic, NMR ($^1H$, $^{13}C$), thermal and electron impact mass spectral studies. The spectroscopic studies reveal the composition, the nature of nitrite ligand in the complexes, electronic transitions, chemical environments of C and H atoms thermal degradation of the complexes. On the basis of characterization data, distorted tetrahedral geometry is suggested for Zn(II), Cd(II) and Hg(II) complexes. The organic ligand (3AP) and their metal complexes were screened against gram negative pathogenic bacteria and fungi in vitro. The results are compared with our previous report J. Korean Chem. Soc. 2013, 57, 341 on 4-aminopyridine and nitrite ion complexes of the same metal ions.

• Korean Journal of Microbiology
• /
• v.23 no.3
• /
• pp.177-183
• /
• 1985

Some properties of an extracellular cytosine deaminase produced from Arthrobacter sp.JH-13 were examined after 20-80% of ammonium sulfate fractionation. Among some substrates, this enzyme utilized cytosine and 5-fluorocytosine as a substrate. The optimum pH and temperature for the activity of this enzyme were found to be near 8.0 and $40^{\circ}C$, respectively. The ensyme was more stable in 0.2M of Tris-HCl buffer than 0.2M of potassium phosphate buffer. The enzyme was generally stable below $50^{\circ}C$, but inactivated completely at $70^{\circ}C$. 1mM of $Fe^{3+},\;K^+\;and\;Na^+$ increased the enzyme activity, but 0.01mM of $Co^{2+},\;Cu^{2+},\;Ni^{2+},\;Hg^{2+},\;Ag^{2+},\;Zn^{2+},\;Ba^{2+},\;and\;Mg^{2+}$ markedly inactivated the enzyme activity. 0.1mM of p-chloromercuribenzoate, trichloroacetic acid, and N-ethylmaleimide compleyely inhibited the enzyme activity, but 0.1mM of 2-mercaptoethanol slightly increased the enzyme activity.