• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.133-137
• /
• 1997

Bean cooking water was used as a raw material for the production of soy-oligosaccharides. To maximize the yield of the physiologically functional oligosaccharides such as raffinose and stachyose, a fermentation process was introduced to reduce sucrose content. Yeast strains utilizing sucrose, but scarcely affecting the raffinose and stachyose for the growth were initially selected to reduce the sucrose content in the bean cooking water. The selected strains were Saccharomyces cerevisiae ATCC 9763, S. cerevisiae KCTC 7039 and Hansenula anomala KFRI 626. Bean cooking water with 2% inoculation volume of these yeasts was fermented until 48 hrs, respectively. The results of sugar analysis according to the fermentation time showed, bean cooking water treated with S. cerevisiae KCTC 7039 and H. anomala KFRI 626 used almost sucrose without decreasing stachyose for the growth.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.225-229
• /
• 1995

Soy oligosaccharide, a low calorie sugar, which is known to improve the intestinal microbial flora, was recovered from the waste of soymilk process by Steffen process. To remove protein contaminants, prior to the Steffen process, pH of the sample was adjusted to $3.5{\sim}4.0$ or calcium chloride was added 8%(w/w) per sugar. Both pretreatment processes were found to remove about $25{\sim}30%$ of the protein initially present in the sample. Using the Steffen process, as much as 85% of soy oligosaccharide could be recovered as a saccharate form. The amounts of calcium chloride and lime used were 20%(w/w) and $100{\sim}120%$(w/w) per total sugar, respectively. After the sugar was desorbed by $CO_{2}$, the final yield of oligosaccharide was 80% while 80% of protein were removed from the original solution. The composition of sugar was similar to that of soybean cooking water.

• KSBB Journal
• /
• v.8 no.3
• /
• pp.217-223
• /
• 1993

Methods for production of ${\gamma}$-Polyglutamic acid( ${\gamma}$-PGA ) by an alkalophilic Alcaligenes sP. were investigated for batch and continuous culture processes. Both quantity and productivity of ${\gamma}$-PGA by Alcaligenes sp. in batch culture were gradually increased with the increase of glucose concentration up to 50g/l , but the maximal production yield of 63% was obtained at 10g/l of glucose concentration. The highest specific growth rate was about $0.25hr^{-1}$ at 50un of glucose concentration, and substrate inhibition was observed at above 50g1f of glucose concentration. The highest ${\gamma}$-PGA formation about 11g/l in a batch system was obtained at 31'C, pH 10.0 and 87rpn Productivity of 2.80g/l/hr for continuous cultivation was 9 times higher than the productivity for batch cultivation.

• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.239-250
• /
• 2002

Evaluation works of oat in mixture with rye on forage yield have not been reported. The objective of this study was to determine yield and quality of forage mixture as affected by maturity of rye cultivar and oat-rye seeding rate at Suweon from 1999 to 2000. The experiment was arranged in a split plot design with three replications. Main plots consisted of maturity of rye. such as early(cv. Koolgrazer) and late(cv. Kodiak)maturing cultivars. Sub-plots consisted of seeding rate (T1: Oat 2000 and rye 0kg/ha, Ts: Oat 150 and rye 40kg/ha, T3: Oat100 and rye 80kg/ha, T4: Oat50 and rye 120kg/ha. and T5: Oat0 and rye 160kg/ha). Crude protein(CP) content of oat-rye mixture harvested in the fall was not influenced by maturity of rye cultivar, but that of oat-rye mixture was increased from 13.6 to 19.3% as the seeding rate of rye increased(P<0.05), however, maturity of rye cultivar significantly affected CP content of oat-rye mixture in the spring(P<0.01). Acid detergent fiber(ADF) content of oat-rye mixture harvested in the spring was not significantly affected by rye cultivar, but the ADF was decreased from 27.8 to 20.7% as the seeding rate of rye increased(P$<$0.01). When rye was harveste in the spring, ADF content of late maturing cultivar 'Kodiak' was shown as 28.0%. This was lower than that of early maturing cultivar 'Koolgrazer' which was shown as 35.8%(P$<$0.01). Among treatments, neutral detergent fiber(NDF) and in vitro dry matter digestibility(IVDMD) of oat-rye mixture showed a similar trend made on ADF. In this experiment, the highest forage yield (12.356kg/ha) was obtained from early maturing rye cultivar and seeding rates of 100kg/ha of oat and 80kg/ha of rye mixture. A significant interaction between maturity of rye cultivar and seeding rate was found(P$<$0.01). The above results indicate that an early maturing rye cultivar at the seeding rate of 100kd/ha in mixtures with 80kg/ha of oat could be recommended as a succeeding cropping system after corn for silage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.3
• /
• pp.459-465
• /
• 1994

Performance of a continuous cocurrent supercritical fluid extraction column for processing of anhydrous milk fat (AMF) was determined. The extract loading increased and the extraction yield decreased as the superficial velocity of AMF increased. The maximum solubility of AMF in $CO_2$ at 4$0^{\circ}C$/3,500 psig was 0.0195g/g. The increase of the carbon dioxide density enhanced the solubility of milk fat and decreased the cholesterol concentration in the extract. Three operation conditions, such as recycle , reflux, and temperature gradient of extraction column, were tested. More short-chain fatty acvids were extracted by the reflux operation . Longchain fatty acids and thehighest ratio fo long-chain unsaturated to saturated fatty acids were also obtained in the raffinate phase with refluex.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.491-498
• /
• 2009

This paper deals with structural analysis and vibration characteristics of scaffolding structures with a hoist according to payloads. In order to analyze the vibrational and structural characteristics for 20-step scaffolding structure, structural and vibrational characteristics for 2-step scaffolding structure were compared with some experimental results. The numerical results for natural frequencies of scaffolding structures have a good agreement with experimental ones. Through the numerical analysis, firstly, it is shown that the maximum stress of scaffolding structures is lower than von-mises yield criteria when four persons with total weight of 280 kgf are working at the top of the scaffolding structures. Secondly, vibration characteristics including natural frequencies and modes for scaffolding structures are shown in case of various kinds of moving masses.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.62-67
• /
• 2002

While upwelling regions account for only 0.1% of the ocean surface, they yield over 40% of world's fish catch. Thus it is vary important making upwelling region by various methods. This study was performed to find out basic hydrodynamic characteristics (function, stability..,) of artificial upwelling structures. The hydrodynamic characteristics of artificial upwelling structures can be summarized as follows: 1) The falling velocity of blocks was effected size($l_B$) of blocks than incident current velocity( $V_0$). 2) The falling horizontal distance was reduced as induce of stratification parameters and block' size. 3) Generation of artificial upwelling current was effected by size of structures and incident current. When stratification parameters was about 3.0 and relative height(hs/h) of structures was about $0.125{\sim}0.15$, stable artificial upwelling current was generated in the back-side of structures.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2004.11a
• /
• pp.5-9
• /
• 2004

Garlic industries in Korea faced with a increasing difficulty because of the pressure of garlic importation from China is ever increasing than before. Therefore this study was conducted to produce low-cost garlics by mechanized cultivation and the results are as follows. A. By applying machinery(stem cutter and size separator, seeder, harvester) the labor was saved over 70% compare with the conventional cultivation B. Growth characteristics and yield showed no difference in mechanized and conventional cultivation of northern-type garlic. C. When scales were sown by seeder, the sowing-depth varied between 3 to 6cm and the rate of 2-plants emergence in one hole was 14.5%.

• Microbiology and Biotechnology Letters
• /
• v.21 no.5
• /
• pp.446-452
• /
• 1993

The cholesterol oxidase produced from Bacillus sphaericus was purified and characterized. Through a series of purification procedures including DEAE-Toyoperal 650C, Sephadex G-200 and DEAE-Sephadex A-50 column chromatography, the purified enzyme was shown to have a specific activity of 0.179 units/mg protein having 31.8 fold purification and final yield of 12%. The molecular weight of the enzyme was estimated to be 47kDa and 47.tkDa by Sephadex G-200 chromatography and SDS-PAGE. The optimum temperature and pH for the enzyme were 30C and 6.0, respectively. The activity of the purified cholesterol oxidase was inhibited by Fe2+ and Hg+.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2564-2569
• /
• 2021

The neutronic analysis of Helium Cooled Ceramic Reflector (HCCR) breeding blankets has been performed using the 3D Monte Carlo code MCNPX and ENDF nuclear data library. This study aims to reduce ⁶Li percentage in the breeder zones as much as possible ensuring tritium self-sufficiency. This work is devoted to investigating the effect of ⁶Li percentage on the HCCR breeding blanket's neutronic parameters, such as neutron flux and spectrum, Tritium Breeding Ratio (TBR), nuclear power density, and energy multiplication factor. In the ceramic breeders at the saturated thickness, increasing the enrichment of ⁶Li reduces its share in the tritium production. Therefore, ceramic breeders typically use lower enriched Li from 30% to 60%. The investigation of neutronic analysis in the suggested geometry shows that using 60% ⁶Li in Li₂TiO₃ can yield acceptable TBR and energy deposition results, which would be economically feasible.