• 한국수소및신에너지학회논문집
• /
• 제30권3호
• /
• pp.209-219
• /
• 2019

Methanol is a liquid fuel which could also be produced from renewable energy sources and has appreciably high energy density. In this work, we investigated the application of $Ce_{0.9}Gd_{0.1}O_{2-x}$ supported Cu and Ni catalysts for hydrogen production via methanol steam reforming. Catalysts were synthesized by solution combustion synthesis. The prepared catalysts with various active materials and Cu loading amounts were tested in a reactor at $200-300^{\circ}C$, 0-5 barg range and steam to methanol molar ratio was 1.5. The catalytic properties of Cu and Ni were compared, and the catalytic performance was shown to depend on the amounts of metal loading and operating conditions such as reaction temperature and pressure.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.461-472
• /
• 2018

$Gd_2O_3:Eu/Bi$ nanoparticles were synthesized via spray pyrolysis and applied for the preparation of a luminescent pearl pigment as an anti-counterfeiting material. The luminescence properties were optimized by changing the $Eu^{3+}$ and $Bi^{3+}$ concentration. Ethylene glycol was used as an organic additive to prepare the $Gd_2O_3:Eu/Bi$ nanoparticles. The highest emission intensity was achieved when the total dopant content was 10.0 at.% and the mole fraction of Bi was 0.1. The concentration quenching was mainly due to dipole-dipole interactions between the same activators, and the critical distances were 9.0 and $19.6{\AA}$ for $Eu^{3+}$ and $Bi^{3+}$, respectively. The prepared $Gd_2O_3:Eu/Bi$ powder exhibited an average size of approximately 82.5 nm and a narrow size distribution. Finally, the $Gd_2O_3:Eu/Bi$ nanophosphor coated on the surface of the pearl pigment was confirmed to have good red emission under irradiation from a portable ultraviolet light-emitting diode lamp (365 nm).

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권3호
• /
• pp.18-22
• /
• 2017

Addition of $BaSnO_3$ (BSO) to $GdBa_2Cu_3O_{7-{\delta}}$ (GdBCO) is reported to enhance the flux pinning property of GdBCO thick films. To investigate the effect of growth condition on the pinning properties, 700 nm-thick BSO-added GdBCO films deposited with varying temperatures and growth rates were prepared by using a pulsed laser deposition method. As the deposition temperature increases, the critical current density and the pinning force density show an improved field dependence up to $750^{\circ}C$ due to the increase in the formation of the a-axis growth and the BSO nanostructures. The films deposited at higher temperatures show degraded surfaces and as a result, degraded pinning behaviors. For the change in growth rate, the critical current density and the pinning force increase as the repetition rate increase at low magnetic fields, but this behavior is reversed in high magnetic fields. These results indicate that the film growth conditions significantly affect the formation of BSO nanostructures and the pinning properties of BSO-added GdBCO films.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1305-1308
• /
• 2009

The experimental particle samples included ($Mn_{0.1}Fe_{0.9}$)O-$Fe_2O_3$ and FeO-($Gd_{0.1}Fe_{0.9}$)$_2O_3$ with $Mn^{2+}\;and\;Gd^{3+}$ substitutions in inverse spinel $Fe_3O_4$. A lecithin surfactant was adsorbed onto the magnetic particles by ultrasonication. The samples prepared showed excellent dispersibility at the mean size of 13 nm; their saturation magnetization values were 63 emu/g for the bare and Mn-substituted magnetites, and 56 emu/g for the Gd-substituted magnetite. The crystal structure of the substituted magnetites was very similar to that of the bare magnetite, due to a small amount of 0.1 mole fraction substituted in synthesizing the magnetite. The magnetite fluids, according to T2-weighted MR images, effectively diminished the signal intensity in the liver and spleen of Sprague-Dawley rats.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.187.2-187
• /
• 2003

• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.445-451
• /
• 2019

형광체 내 모체로 사용될 때 활성 이온 주위에 분포하여 형광 특성에 많은 영향을 미치는 알칼리 토금속인 $Ba^{2+}$ 이온을 기반으로 하는 바나데이트 화합물인 $Ba_2GdV_3O_{11}$에 희토류 이온 $Eu^{3+}$를 첨가하여 형광 강도 및 형광 수명을 연구하였다. 고상법을 이용하여 $Ba_2GdV_3O_{11}:Eu^{3+}$ 형광체를 합성하였으며 X선 회절 분석을 통하여 형광체의 결정성을 확인하였다. $Ba_2GdV_3O_{11}:Eu^{3+}$ 형광체의 형광특성은 광학 및 레이저를 이용하여 측정하였다. $Ba_2GdV_3O_{11}:Eu^{3+}$ 형광체의 에너지 전이와 확산은 $Eu^{3+}$의 농도에 크게 의존한다. $Eu^{3+}$의 농도가 낮을 때 CT 밴드로의 강한 형광을 보이나 $Eu^{3+}$의 농도가 높아질수록 4f - 4f 전이에 의한 형광이 강하게 나타난다. $Eu^{3+}$ 이온의 농도 증가로 인해 이온 간의 에너지가 확산되어 형광의 수명시간은 감소하였다. 에너지 전이는 낮은 $Eu^{3+}$ 농도에서 두 $Eu^{3+}$ 이온 사이에서 발생하며 에너지 확산은 높은 $Eu^{3+}$ 농도에서 크게 발생한다.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.182-187
• /
• 2007

10 mol% $Gd_{2}O_{3}-CeO_{2}$ powder was sintered by microwave in a 2.45 GHz multimode cavity to develop a dense electrolyte layer for intermediate temperature solid oxide fuel cells (IT-SOFCs). Samples were sintered from $1100^{\circ}C$ upto $1500^{\circ}C$ by $50^{\circ}C$ difference and kept for 10 min and 30 min at the maximum temperature respectively. Theoretical density of the sample sintered at $1200^{\circ}C$ for 10 min was 95.4% and increased gradually upto 99% in the sample sintered at $1500^{\circ}C$ for 30 min. All of sintered samples showed very fine microstructures and the maximum average grain size of the sintered sample at $1500^{\circ}C$ for 30 min was $(0.87{\pm}0.42){\mu}m$. Ionic conductvity of the samples were measured by DC 4 probe method.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 추계학술발표회요약집
• /
• pp.264-264
• /
• 1998

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.261-261
• /
• 1999

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1205-1210
• /
• 1999

Ceria based electrolytes were fabricated by a plasma spraying method. The porosity which was crated during the plasma spraying process was infiltrated with Ce0.8Gd0.2O2 sol by ultrasonic treatment and heat treatment at 90$0^{\circ}C$ in order to improve physical and electrical properties. The porosity decreased from 9.8% to 6.5% and gas permeability at 80$0^{\circ}C$ decreased from 16.7$\times$10-3 to 5.7$\times$10-3 cm3(STP)/cm2.s.cmHg as the number of treatment increased 10 cycles. The ionic conductivity was also increased about 30% after 10 times of sealing.