• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.238-247
• /
• 2004

Statement of problem: Major objective in making on implant-supported prosthesis is the production of superstructure that exhibits a passive fit when connected to multiple abutments. One requirement to ensure passive fit is to make an accurate impression. Purpose : The purpose of this study was to compare the accuracy of master cast fabricated by using different impression methods at the different impression levels. Material and method: The master model used in this study was resin block having low implant analogs. Impression method studied were 1) direct method on fxiture level (Group FIX-D), 2) indirect method on fixture level(Group FIX-I), 3) modified indirect method on fixture level(Group FIX-M), 4) direct method on abutment level(Group AB-D) and 5) indirect method on abutment level(Group AB-I). Each of the five groups took 10 impressions. Fifty impressions were made for master cast by using Impregum $F^{(R)}$ impression material loaded on individual tray. Three dimensional measuring microscope was used to measure the inter-implant distance. Error rate of each inter-implant distance were calculated and evaluated. Results : The results were as follows. 1. Group FIX exhibited higher accuracy than group AB. 2. In group FIX, modified indirect method showed the highest accuracy, while indirect method showed the lowest accuracy. In group Ab, indirect method showed the higher accuracy than direct method. 3. Group FIX showed larger horizontal error than group AB. But, group AB showed the larger vertical error than group FIX. 4. Group Fix-M showed smallest vertical and horizontal error. Conclusion: An impression method have more effect on accuracy of master model than an impression level. A modified indirect method showed smallest vertical and horizontal error.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.63-72
• /
• 2006

Purpose: The purpose of this study was to compare the accuracy of master cast fabricated by using different impression methods at the different impression levels. Material and Method: The master model used in this study was resin block having low implant analogs. Impression method studied were 1) direct method on future level (Group FIX-D), 2) Indirect method on fixture level(Group FIX-I), 3) Modified indirect method on fixture level(Group FD(-M), 4) Direct method on abutment level(Group AB-D) and 5) Indirect method on abutment level(Group AB-I). Each of the five groups took 10 impressions. Fifty impressions were made for master cast by using Impregum $F^(R)$ impression material loaded on individual tray. Three dimensional measuring microscope was used to measure the inter-implant distance. Error rate of each inter-implant distance were calculated and evaluated. Results: The results were as follows. 1. Group FIX exhibited higher accuracy than group AB. 2 In group FIX, modified indirect method showed the highest accuracy, while indirect method showed the lowest accuracy. In group Ab, indirect method showed the higher accuracy than direct method. 3. Group FIX showed larger horizontal error than group AB. But, group AB showed the larger vertical error than group FIX. 4. Group Fix-M showed smallest vertical and horizontal error.

• Korean Journal of Mathematics
• /
• v.27 no.3
• /
• pp.779-791
• /
• 2019

In this paper, we consider derivation of an ordered ${\Gamma}$-semiring and introduce the notion of reverse derivation on ordered ${\Gamma}$-semiring. Also, we obtain some interesting related properties. Let I be a nonzero ideal of prime ordered ${\Gamma}$-semiring M and let d be a nonzero derivation of M. If ${\Gamma}$-semiring M is negatively ordered, then d is nonzero on I.

• Journal of the Chungcheong Mathematical Society
• /
• v.30 no.4
• /
• pp.357-367
• /
• 2017

In this paper, we introduce the notion of multiplier of AC-algebra and consider the properties of multipliers in AC-algebras. Also, we characterized the fixed set $Fix_d(X)$ by multipliers. Moreover, we prove that M(X), the collection of all multipliers of AC-algebras, form a semigroup under certain binary operation.

• Journal of Korea Water Resources Association
• /
• v.33 no.S1
• /
• pp.37-47
• /
• 2000

The method of delays is widely used for reconstruction chaotic attractors from experimental observations. Many studies have used a fixed delay time ${\tau}_d$ as the embedding dimension m is increased, but this is not necessarily the best choice for obtaining good convergence of the correlation dimension. Recently, some researchers have suggested that it is better to fix the delay time window ${\tau}_w$ instead. Unfortunately, ${\tau}_w$ cannot be estimated using either the autocorrelation function or the mutual information, and no standard procedure for estimating ${\tau}_w$ has yet emerged. However, a new technique, called the C-C method, can be used to estimate either ${\tau}_d\;or\;{\tau}_w$. Using this method, we show that, for small data sets, fixing ${\tau}_w$, rather than ${\tau}_d$, does indeed lead to a more rapid convergence of the correlation dimension as the embedding dimension m in increased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2000.05a
• /
• pp.37-47
• /
• 2000

The method of delays is widely used fur reconstructing chaotic attractors from experimental observations. Many studies have used a fixed delay time ${\tau}_d$ as the embedding dimension m is increased, but this is not necessarily the best choice for obtaining good convergence of the correlation dimension. Recently, some researchers have suggested that it is better to fix the delay time window ${\tau}_w$ instead. Unfortunately, ${\tau}_w$ cannot be estimated using either the autocorrelation function or the mutual information, and no standard procedure for estimating ${\tau}_w$has yet emerged. However, a new technique, called the C-C method, can be used to estimate either ${\tau}_d{\;}or{\;}{\tau}_w$. Using this method, we show that, for small data sets, fixing ${\tau}_w$, rather than ${\tau}_d$, does indeed lead to a more rapid convergence of the correlation dimension as the embedding dimension m is increased.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.200-202
• /
• 2001

This paper presents standards of asset division for transmission and distribution company. In this study, we fix 3 scenarios to divide asset into transmission and distribution company. We don't show accurate results for asset division but propose direction in asset division.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.38-38
• /
• 2009

Wafer thickness of crystalline silicon is an important factor which decides a price of solar cell. PC1D was used to fix a condition that is required to get a high efficiency in a crystalline silicon solar cell using thin wafer($150{\mu}m$). In this simulation, base resistivity and emitter doping concentration were used as variables. As a result of the simulation, $V_{oc}$=0.6338(V), $I_{sc}$=5.565(A), $P_{max}$=2.674(W), FF=0.76 and efficiency 17.516(%) were obtained when emitter doping concentration is $5{\times}10^{20}cm^{-3}$, depth factor is 0.04 and sheet resistance is $79.76{\Omega}/square$.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.305-308
• /
• 2002

An 1.8V 6bit IGSPS ADC for high speed data acquisition is discussed in this paper. This ADC is based on a flash ADC architecture because the flash ADC is the only practical architecture at conversion rates of IGSPS and beyond. A straightforward 6bit full flash A/D converter consists of two resistive ladders with 63 laps, 63 comparators and digital blocks. One important source of errors in flash A/D converter is caused by the capacitive feedthrough of the high frequency input signal to the resistive reference-lauder. Consequently. the voltage at each tap of the ladder network can change its nominal DC value. This means large transistors have a large parasitic capacitance. Therefore, a dual resistive ladder with capacitor is employed to fix the DC value. Each resistive ladder generates 32 clean reference voltages which alternates with each other. And a two-stage amplifier is also used to reduce the effect of the capacitive feedthrough by minimizing the size of MOS connected to reference voltage. The proposed ADC is based on 0.18${\mu}{\textrm}{m}$ 1-poly 6-metal n-well CMOS technology, and it consumes 307㎽ at 1.8V power supply.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.159-165
• /
• 2018

In this paper, a low-loss wideband waveguide transducer is proposed for millimeter-wave communication and radar applications. A conventional E-plane probe transducer is generally designed using thin and flexible substrate at millimeter-wave frequencies, considering the very small waveguide size. However, it results in serious performance degradation caused by the bending of the substrate. In order to alleviate this problem and provide a reliable performance, we propose an extended E-plane probe transducer where the probe substrate is extended to and fix ed in the slit area formed in the waveguide wall. It is fabricated using $127{\mu}m$-thick substrate with dielectric constant of 2.2. The measurement in the back-to-hack configuration shows the excellent insertion loss of 1.35 dB (${\pm}0.35dB$) including the loss of 3 cm-long thru waveguide and return loss better than 13.8 dB over entire W-band (75-110 GHz). Therefore, it can be effectively applied for millimeter-wave high-speed communications and high-sensitivity radars.