• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.897-907
• /
• 1991

This study was conducted to research the formation and the color development of CoO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing CoO-ZnO-Fe2O3, in which CoO causes the color, as a basic composition, $\chi$CoO.(1-$\chi$)ZnO.Fe2O3 system, $\chi$CoO.(1-$\chi$)ZnO.TiO2 system and $\chi$CoO.(1-$\chi$)ZnO.SnO2 system were prepared with $\chi$=0, 0.2, 0.5, 0.7, 1.0 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 90 minutes. These specimens were analyzed by the reflectance measurement and the X-ray diffraction analysis and the results were summarized as follows: 1. All of the specimens formed the spinel structure and were colored with stable yellow or blue. 2. As the content of CoO and Fe2O3 in the specimens being increased, the reflectance of each specimen was measured becoming lower and the colors were changed from yellow to greyish blue and from blue to dark blue. 3. As the substituting amount of Co2+ ion for Zn2+ ion in $\chi$CoO-ZnO-TiO2-SnO2 system being increased, the colors were changed from blue to greyish blue. The colors were changed from yellow to grayish green owing to the tetrahedral Co2+ ions being increased, the octahedral Co2+ ions being decreased with increasing the amount of Sn4+ ions. 4. CoO-ZnO-Fe2O3-TiO2-SnO2 system, in which Zn2+ was substituted with Co2+ and Fe3+ was substituted with Ti4+ and Sn4+, easily formed the spinel structure without regard to the amount of substitution or the ion owing to the selectivity of the coordination number: 4 of Zn2+, 4 of Co2+, 6 of Fe3+ or 6 of Ti4+ and Sn4+.

• 한국세라믹학회지
• /
• 제20권3호
• /
• pp.250-254
• /
• 1983

The effects of the various amount of $CeO_2$ $MnO_2$ and $Fe_2O_3$ added to the high lead-silicate glasses on the X-ray induced coloration were studied. The light transmissions and chromaticities of the glasses before and after exposing to X-ray radiation were measured to investigate the effects by additivies. The results are as follows ; 1. High lead-silicate glass added $CeO_2$ or $MnO_2$ has a little effect on the transmission but has a considerable effect on the chromaticity. The chromaticies of 56.6wt% PbO content glasses were changed as 3-7 times as those of 28.3wt% PbO content glasses. 2. By the X-ray irradiation glasses containing 0.2-0.5wt% $CeO_2$ were changed the least in chromaticity that is the most effective in preventing the X-ray induced coloration. 3. By X-ray irradiation $MnO_2$ reduced the transmissions and showed purple coloration. 4. Transmission change amounts of the glasses added $CeO_2$ and $Fe_2O_3$ were less than those of the glasses added $CeO_2$ alone by X-ray irradiation.

• 대한화학회지
• /
• 제38권8호
• /
• pp.547-551
• /
• 1994

$Nd_{1-x}Ba_xFeO_{3-y}$계에 대한 각 조성의 시료를 1200$^{\circ}C$ 대기압하에서 반응물을 가열하여 합성하였고 X-선 분말 회절분석을 통하여 고용체가 합성되었음을 확인하였다. X-선 회절분석 결과 x = 0.00과 0.25는 팔면체장이 뒤틀린 orthoferrite형의 사방정계이며, x = 0.50과 0.75의 조성을 갖는 화합물은 단순입방정계이다. 고용체내의 Fe이온은 $Fe^{3+}$와 $Fe^{4+}$이온의 혼합원자가 상태로 존재하기 때문에 $Fe^{4+}$이온의 몰비와 산소공위로부터 비화학량론적 조성식들을 결정하였다. Mossbauer분광분석결과 A자리에 $Ca^{2+}$ 또는 $Sr^{2+}$ 이온이 치환된 계들과는 달리 $Ba^{2+}$ 이온이 치환된 화합물들은 $FeO_6$와 $FeO_4$ 뿐만 아니라 $FeO_5$이 5배위장이 형성됨을 알 수 있었다. 또한 x = 0.25와 0.50 조성들은 초상자성의 스펙트럼을 보이는데 이는 $Fe^{3+}$ 와 $Fe^{4+}$ 이온간의 강자성 상호작용을 하는 영역을 형성하기 때문이다. 모든 시료의 전기전도도는 반도성 범위에 속한다. 시료는 $O^{2-}$ 이온을 매개로 한 Fe 이온간의 전자전달과정에서 $Fe^{4+}$ 이온은 전자 받게 준위로 작용하기 때문에 $Fe^{4+}$이온이 증가함에 따라 전기전도도의 활성화에너지가 감소된다.

• 한국습지학회지
• /
• 제25권4호
• /
• pp.386-393
• /
• 2023

최근 들어서 국내의 해양치유산업 활성화를 위한 해양치유자원의 효능·효과에 관한 연구개발이 진행 중에 있다. 본 연구는 해양치유자원으로서 잘 알려진 머드 물질에 대한 효능성분 분석을 통해 활용·관리 기준을 제시하였다. 머드물질 시료는 국내 갯벌에서 채취되었으며, 모래질, 실트질 및 점토질 함량은 각각 평균 7.87%, 74.95% 및 17.17%로 머드(실트+점토)의 평균 함량이 90% 이상이었다. 효능성분은 SiO2(68.4%)성분이 가장 높으며, 다음으로 Al₂O₃(13.3%)>Fe₂O₃(4.0%)>K₂O(2.9%)>Na₂O(2.3%)>MgO(1.6%)>CaO(1.0%)>TiO₂(0.7%) 순으로 평균함량이 높았다. 효능성분 분석을 바탕으로 기능성을 나타내는 성분(기능 성분)을 Si, Al, Fe, K, Na, Mg, Ca를 선정하였으며, 또한 품질관리를 목적으로 정하는 성분(지표 성분)은 효능을 가진 성분 중 함량이 높은 K, Mg, Ca로 결정하였다. 결과적으로 기존 문헌을 참고하여 국내 갯벌머드자원이 해양치유자원으로서 활용·관리되기 위해서는 원재료의 머드함량이 70.0% 이상 그리고 지표 성분인 K₂O+MgO+CaO의 합이 5.0% 이상을 기준으로 제시하였다.

• Journal of Magnetics
• /
• 제14권3호
• /
• pp.120-123
• /
• 2009

In this study, BiFe$O_3$-BaTi$O_3$ ceramics have been fabricated by a solid-state reaction method. The effects of BaTi$O_3$ content in the (1-x)BiFe$O_3$-xBaTi$O_3$ (x = 0.1, 0.2, 0.25, 0.3, 0.4, 0.5) system on crystal structure and magnetic, dielectric, and ferroelectric properties were investigated. Perovskite BiFe$O_3$ was stabilized through the formation of a solid solution with BaTi$O_3$. Rhombohedrally distorted structure (1-x)BiFe$O_3$-xBaTi$O_3$ ceramics showed strong ferromagnetism at x = 0.5. Dielectric and ferroelectric properties of the BiFe$O_3$-BaTi$O_3$ system also changed significantly upon addition of BaTi$O_3$. It was found that the maximum dielectric and ferroelectric properties were exhibited in the (1-x)BiFe$O_3$-xBaTi$O_3$ system at x = 0.25. This suggested the morphotropic phase boundary (MPB) with the coexistence of both rhombohedral and cubic phases of the (1-x)BiFe$O_3$-xBaTi$O_3$ system at x = 0.25.

• 한국재료학회지
• /
• 제23권4호
• /
• pp.219-226
• /
• 2013

Activated magnetite ($Fe_3O_{4-{\delta}}$) has the capability of decomposing $CO_2$ proportional to the ${\delta}$-value at comparatively low temperature of $300^{\circ}C$. To enhance the $CO_2$ decomposition capability of $Fe_3O_{4-{\delta}}$, $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$ were synthesized and then reacted with $CO_2$. $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ powders having Fe to Co mixing ratios of 9:1, 8:2, 7:3, 6:4, and 5:5 were synthesized by co-precipitation of $FeSO_4{\cdot}7H_2O$ and $CoSO_4{\cdot}7H_2O$ solutions with a $(NH_4)_2C_2O_4{\cdot}H_2O$ solution. The same method was used to synthesize $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ powders having Fe to Mn mixing ratios of 9:1, 8:2, 7:3, 6:4, 5:5 with a $MnSO_4{\cdot}4H_2O$ solution. The thermal decomposition of synthesized $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ and $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ was analyzed in an Ar atmosphere with TG/DTA. The synthesized powders were heat-treated for 3 hours in an Ar atmosphere at $450^{\circ}C$ to produce activated powders of $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$. The activated powders were reacted with a mixed gas (Ar : 85 %, $CO_2$ : 15 %) at $300^{\circ}C$ for 12 hours. The exhaust gas was analyzed for $CO_2$ with a $CO_2$ gas analyzer. The decomposition of $CO_2$ was estimated by measuring $CO_2$ content in the exhaust gas after the reaction with $CO_2$. For $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$, the amount of $Mn^{2+}$ oxidized to $Mn^{3+}$ increased as x increased. The ${\delta}$ value and $CO_2$ decomposition efficiency decreased as x increased. When the ${\delta}$ value was below 0.641, $CO_2$ was not decomposed. For $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$, the ${\delta}$ value and $CO_2$ decomposition efficiency increased as x increased. At a ${\delta}$ value of 0.857, an active state was maintained even after 12 hours of reaction and the amount of decomposed $CO_2$ was $52.844cm^3$ per 1 g of $(Fe_{0.5}Co_{0.5})_3O_{4-{\delta}}$.

• 한국세라믹학회지
• /
• 제41권11호
• /
• pp.834-841
• /
• 2004

우리 주변(경기도 이천, 양평, 용인)에서 쉽게 구할 수 있는 곡물대 10가지와 2가지의 곡물껍질(콩깍지, 왕겨), 4가지의 채소(시금치, 무우잎과 줄기, 호박잎과 줄기, 고추대)의 재를 만들어 한국적 천연 재유의 특성을 연구 분석하고 그 활용 방안을 제시하였다. 그 결과 곡물대재는 4가지로 분류되었다. 1그룹인 들깨대재, 참깨대재, 검정콩대재, 팥대재에는 다른재에 비하여 $SiO_2$ 성분이 적고 CaO와 P$_2$ $O_{5}$ 성분이 10%이상 함유되어 비교적 유백현상이 강하게 나타났으며 약한 녹색기가 도는 밝은 노랑색유로 나타나 유백유 기본유로 활용하기에 적합하였다. 2그룹인 고추대재, 시금치재, 콩깍지재, 무우잎ㆍ줄기재, 콩대재에는 모든 성분이 비교적 고르게 함유되어 있었고, 특히 MgO 함량이 평균 8.53%로 가장 많고 Fe$_2$ $O_3$ 성분이 2% 정도 함유하고 있어 채도가 높은 녹색기를 많이 띤 노랑색유로 나타났으며 유흐름 현상이 강하게 나타나 이라 보 유약의 기본유로 활용하기에 적합하였다. 3그룹인 옥수수대재, 흰콩대재, 호박잎ㆍ줄기재는 $SiO_2$, $Al_2$ $O_3$의 함량이 다른 재에 비하여 많았고 Fe$_2$ $O_3$가 3～5%로 가장 많이 함유되어 있어 UV에 대한 4분류 중 색상, 채도 변화가 가장 크게 나타났으며 짙은 노랑에서 짙은 고동색을 지닌 색상이 강하게 나타나 천목유 및 흑유의 기본유로 활용하기에 적합하였다. $SiO_2$ 성분이 45～82%로 함량이 제일 많아 잘 녹지 않고 다른 재에 비하여 Fe$_2$ $O_3$와 P$_2$ $O_3$ 성분의 함량이 적은 4그룹인 갈대재, 볏짚재, 수수대재, 왕겨재는 푸른색기 또는 녹색기가 도는 흰색에 가까운 미색으로 나타나 백유의 기본유로 활용하기에 적합하였다.

• 대한금속재료학회지
• /
• 제47권3호
• /
• pp.188-194
• /
• 2009

Recently, new extraction technology for manganese nodule has been developed as alternative noble metallic resources. It is important to understand thermodynamic behaviors of phosphorus in low basic slag system from the viewpoint of the refining processing optimization. Thermodynamic behaviors of phosphorus in the $FeO-MnO-CaO-SiO_2-MgO_{satd.}$ slag system were investigated at 1723 K with various oxygen potential and slag composition of low basicity. The experimental results for dependence of phosphorus on oxygen potential and slag basicity indicated that the dissolution mechanism of phosphorus into slag of low basicity could be derived as follows; $[P]+5/4O_2+(O^{2-})=({PO_{3.5}}^{2-})$ Present experimental results implied that stability of phosphorus in slag would be depended on both of $O^{2-}$ (basicity) and content of $Ca^{2+}$ in molten slag. The thermodynamic effect of FeO, MnO and $Na_2O$ on low basicity on phosphate capacity was discussed.

• 한국광물학회지
• /
• 제9권2호
• /
• pp.55-63
• /
• 1996

Epidote occurs as veinlets in the propylitic alteration zone of the Bobae clay deposit, Pusan, Korea. Its cell parameters apparently decrease with the contents of Al, Fe, and Ca. Fourier transform infrared (FTIR) spectra show one hydrosyl environment related to AlM2 at 3357-3358 cm-1. In the mid-infrared region, the peaks at 950 and 1030 cm-1 sharper with increasing Al shifting to higher energy region. The peak at 885 cm-1 shifts slightly to a lower energy region with a decreasing intensity as the Fe content increases. In the far-IR region, epidote exhibits absorption bands at 120 and 140 cm-1, which are related to the Ca-O bonds in A-sites.M ssbauer spectra of epidote show that the isomer shifts of Fe3+ range from 0.36-0.37 at the M3 site and from 0.35-0.44 at M1 site. Fe2+ shows the isomer shift ranging from 1.11 to 1.13. Quadrupole splitting is 2.04 for Fe3+M3, 0.52-0.70 for Fe3+M1, and 2.61-2.70 for Fe2+M3. Calculation shows Fe3+M386-90.7%, Fe3+M12.5-3.6%, and Fe2+M35.8-11.4% of total iron, showing preferential distribution of Fe3+ in the M3 site. The Fe3+M3 content is between 0.486 and 0.513 per formula unit. in the Fe-rich epidote, less Fe3+ and more Fe2+ are accommodated in the M1 and M3 sites. Hence, the overall disorder increases as total Fe content increase. The ordering parameter of the Bobae epidote is 0.93-0.95, suggesting a disequilibrium state below 200$^{\circ}C$. The constant temperature over a long period may be essential for the transition from disordered state to equilibrium state, despite the possible variation in flux and composition of the hydrothermal fluid.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.161-165
• /
• 2004

Aluminum source in an Al-Fe coating reacts with molten carbonate and develops a protective $LiAlO_2$ layer on the coating surface during operation of molten carbonate fuel cells (MCFC). However, if aluminum content in an Al-Fe coating decreases to a critical level for some reasons during MCFC operation, a stable and continuous $LiAlO_2$ protective layer can no longer be maintained. The aluminum content in an Al-Fe coating can be depleted by two different processes; one is by corrosion reaction at the surface between the aluminum source in the coating and molten carbonate, and the other is inward-diffusion of aluminum atoms within the coating into a substrate. In these two respects, therefore, the decreasing rate of aluminum concentration in an Al-Fe coating was measured, and then the influences of these two aspects on the lifetime of Al-Fe coating were investigated, respectively.