• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.74-74
• /
• 2009

The ArF PR mask was. developed to overcome the limit. of sub 40nm patterning technology with KrF PR. But ArF PR difficult to meet the required PR selectivity by thin PR thickness. So need to the multi-stack mask such as amorphous carbon layer (ACL). Generally capacitively coupled plasma (CCP) etcher difficult to make the high density plasma and inductively coupled plasma (ICP) type etcher is more suitable for multi stack mask etching. Hybrid Coupled Plasma source (HCPs) etcher using the 13.56MHz RF power for ICP source and 2MHz and 27.12MHz for bias power was adopted to improve the process capability and controllability of ion density and energy independently. In the study, the oxide trench which has the multi stack layer process was investigated with the HCPs etcher (iGeminus-600 model DMS Corporation). The results were analyzed by scanning electron microscope (SEM) and it was found that etching characteristic of oxide trench profile depend on the multi-stack mask.

• Journal of Korean Society of Forest Science
• /
• v.69 no.1
• /
• pp.51-55
• /
• 1985

Pinus thunbergii ${\times}$ P. massoniana $F_1$ hybrids were made by pollinating 15 years old Japanese black pine (P. thunbergii) with Masson pine (P. massoniana) pollen, air-shipped from Taiwan. The crossability between two species were observed. Seedling height, morphological characteristics, and the composition of phenolic compounds of these hybrids and the open-pollinated progenies of P. thunbergii were investigated. The results of the observation were as follows; 1) Number of the hybrid seeds per cone was 2.3, while open-pollinated Japanese black pine produced 26 seeds per cone. 2) All hybrid seedlings outgrew P. thunbergii, averaging 151% of mean height of Japanese black pine seedlings. The growth of hybrids was much variable, ranging from 120% to 208% of mean height of the open-pollinated progenies of P. thunbergii. 3) With regard to needle characteristics, the hybrid needles were longer and softer than those of P. thunbergii. The color of hybrid needles showed yellowish green. The positions of resin ducts in P. thunbergii observed medial, while those of hybrids showed medial and external. 4) No large difference in phenolic compound composition between hybrid and P. thunbergii was found, but phenolic compound of unknown 4 and 6 were observed only in hybrid. Further intensive work is recommended in this area.

• Korean Journal of Breeding Science
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2009

This study was carried out to breed and develop high quality and functional nutrient tomato with multi disease resistance as well as a stable growing adaptation for fresh market usage under protected plastic houses cultivation. The materials were used 5 inbred lines and their 6 hybrids of large tomato group, which have been bred and developed from 1999 to 2007 in Division of Plant Resource Department of Chungnam National University. Fruit weight showed hybrid vigor effect that $F_1$ hybrids weighed more than their parent lines, fruit shape formed three type of oblate, deep oblate and globe shape, in firmness and pericarp thickness have got a high significant correlation, inbred DN611 line was measured the most firm fruit with 6.04 mm pericarp thickness. In fruit color at maturity, pink color crossed to red color appeared all red fruit color in the $F_1$ hybrids, it means red skin color is a dominant gene compared to pink skin color is a recessive gene in tomato, while between fruit skin color and shoulder part color showed no any co-relationship. The sugar content and titratable acid of $F_1$ hybrids inherited an intermediate data of their parent lines, the flavor of KP543 inbred line and the hybrid (JB535 x KP543) revealed the better taste with high brix and proper titratable acid content$^{*}$. In beta carotene content DN611 line showed 2~3 times higher than other materials so that its 3 hybrids contained an increased level of beta carotene, lycopene content was not so much difference among inbred lines and $F_1$ hybrids, of them MD508 contained higher of 8.72 mg and hybrid (JB535 x JA517) had 8.05 mg lycopene content per 100 g fruit, overall pink skin color and red skin color measured a higher lycopene content than yellow and orange skin color at ripe stage. In disease resistance test by PCR marker for Fusarium race2 (I2), Nematode (Mi1), ToMV ($Tm2^2$), Cladosporium (Cf9), (JB535 x JA517) hybrid have got multi-resistance with homozygote band in Nematode, ToMV, Cladosporium and heterozygote band in Fusarium race2. Through this breeding program we could select high quality and functional nutrient with multi resistant $F_1$ hybrids and inbred lines in tomato which are two best hybrids (JB535 x MD508), (JB535 x JA517), additionally developed high beta carotene inbred line DN611 and increased the level of lycopene inbred line MD508. These results will be very useful to make a high quality tomato variety continuously.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.239-242
• /
• 2008

Combustion Characteristic with initial port-diameter of fuel was studied in hybrid propulsion system using cylindrical single port-grain. In order to understand a variation of combustion characteristic with initial port-diameter, experimental studies were performed with the GOX and $GN_2O$ as oxidizer, and PE as fuel. As results, burning rate decreased with increase of initial port-diameter of fuel. And the variation of burning rate with using $GN_2O$ is smaller than using GOX.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.424-428
• /
• 2003

This study was conducted to find out the optimum cultural method for hybrid seed production of Chalok 2. Higher seed yield was obtained when KW3 was used as a seed parent (female). KW7 was shown Higher barren stalk occurrence which caused significant seed yield reduction when it was used as a seed parent (female). The ratio of female (KW3) to male (KW7) rows with 4 to 1 had higher seed yield than that of 2:1 or 3:1. In case of using KW3 toy a seed parent, KW3 was susceptible to stem and ear rotting disease. The 35th day after silking was optimal period to harvest due to higher 100-grain weight, lower rotten grain, and higher germination rate.

• Membrane Journal
• /
• v.21 no.2
• /
• pp.127-140
• /
• 2011

The effects of $TiO_2$ photocatalyst coating bead concentration, water-back-flushing period (FT), and back-flushing time (BT) were investigated in hybrid process of ceramic ultrafiltration and photocatalyst for advanced drinking water treatment in this study. Photocatalyst coating bead concentration was changed in the range of 10~40 g/L, FT in 2~10 min and BT in 6~30 sec. Then, we observed the effects on resistance of membrane fouling $(R_f)$, permeate flux (J) and total permeate volume $(V_{\Upsilon})$ during total filtration time of 180 min. As decreasing photocatalyst coating bead concentration, $R_f$ increased and J decreased. $V_{\Upsilon}$ was the highest value of 8.85 L at 40 g/L of photocatalyst coating bead concentration. At FT change experiment, $R_f$ decreased and J increased as decreasing FT. Then $R_f$ decreased and J increased according to increasing BT at BT change experiment. Because at NBF (no back-flushing) dramatic membrane fouling reduced membrane pore size, turbid and dissolved organic matters ($UV_{254}$ absorbance) could be removed efficiently. Therefore, treatment efficiencies of turbidity and dissolved organic matters were the highest at NBF. Then by cleaning effect of photocatalyst coating bead, the treatment efficiencies of turbidity and dissolved organic matters increased as decreasing FT and increasing BT.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2305-2310
• /
• 2011

This paper describes a design of dual band balanced amplifier using a lefted handed meta-material transmission line structure for high frequency application. Meta-material transmission lines have been known to have dual band frequency responses. A dual band branch line hybrid coupler is designed using the meta-material transmission lines, and measured at first. Two identical dual band amplifiers are also designed, built and tested using the same meta-material transmission structure. The proposed dual band balanced amplifier is composed of those dual band branch line hybrid coupler and amplifiers. In order to suggest an design example, a prototype of dual band balanced amplifier is built and measured at the dual frequencies, 1800MHz($f_1$) and 2300MHz($f_2$). The simulation and measurement show that the fabricated balanced amplifier operates well at the desired dual frequencies bands with the gain of 11.12dB and 17.67dB at $f_1$ and $f_2$, respectively, with a good agreement with the simulation results.

• Microbiology and Biotechnology Letters
• /
• v.22 no.1
• /
• pp.23-30
• /
• 1994

Intergeneric hybrids formed between Aspergillus oryzae var oryzae and Penicillium verruculosum F-3 were obtained by nuclear transfer technique. Several auxotrophic mutants isolated fromconidio-spores of the two strains mutagenized with ultraviolet and N-methyl-N-nitrosoguanidine. Optimal conditions for formation of intergeneric hybrids were investigated. Frequencies of hybrid formation by nuclear transfer were 3$\times $10$^{-5}$ $~$1$\times $10$^{-5}$. From observation of genetic stability, conidial size, DNA content, nuclear stain, it was suggested that their karyptypes are aneuploid. The hybrid posses the 1.3$~$2.2 fold higher amylase activities than those of parental strains. It was also revealed that some hybids had different isozyme patterns compared to those of parental strains by amylase activity assays.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.109-117
• /
• 2011

In this study, we experimented that how influence chain extension to waterborne urethane-epoxy hybrid resin for leather garment coatings. First of all, We had analyzed datas by FT-IR, SEM and machanical properties. By instruments analysis measurement we confirmed that synthesis of epoxy and hybrid resin. In this experiment we knew that polyurethane-epoxy hybrid resin have 5 grades of solvent resistance. Tensile strength measured in the polyurethane-epoxy resin(EDA 5.37g, 2.386 $kg_f/mm^2$) had the most strong strength.. Also polyurethane-epoxy hybrid resin had better result(EDA 5.37g. 37.4 mg. loss) than other hybrid resins. As hight proportion of EDA in hybid resin, we obtained low elongation and low flexibility. In this result, chain extension of waterborne polyurethane-epoxy hybrid resin showed that how effect in leather coating by ratio of EDA.

• Journal of Power Electronics
• /
• v.5 no.2
• /
• pp.129-141
• /
• 2005

A high-performance robust hybrid speed controller for a permanent-magnet synchronous motor (PMSM) drive with an on-line trained neural-network model-following controller (NNMFC) is proposed. The robust hybrid controller is a two-degrees-of-freedom (2DOF) integral plus proportional & rate feedback (I-PD) with neural-network model-following (NNMF) speed controller (2DOF I-PD NNMFC). The robust controller combines the merits of the 2DOF I-PD controller and the NNMF controller to regulate the speed of a PMSM drive. First, a systematic mathematical procedure is derived to calculate the parameters of the synchronous d-q axes PI current controllers and the 2DOF I-PD speed controller according to the required specifications for the PMSM drive system. Then, the resulting closed loop transfer function of the PMSM drive system including the current control loop is used as the reference model. In addition to the 200F I-PD controller, a neural-network model-following controller whose weights are trained on-line is designed to realize high dynamic performance in disturbance rejection and tracking characteristics. According to the model-following error between the outputs of the reference model and the PMSM drive system, the NNMFC generates an adaptive control signal which is added to the 2DOF I-PD speed controller output to attain robust model-following characteristics under different operating conditions regardless of parameter variations and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed 200F I-PD NNMF controller. The results confirm that the proposed 2DOF I-PO NNMF speed controller produces rapid, robust performance and accurate response to the reference model regardless of load disturbances or PMSM parameter variations.