• International Journal of Reliability and Applications
• /
• v.18 no.2
• /
• pp.45-63
• /
• 2017

In this paper, we have formulated optimum Accelerated Life Test (ALT) plan for a parallel system with two independent components using masked data with ramp-stress loading scheme and Type-I censoring. Consider a system of two independent and non-identical components connected in parallel. Such a system fails whenever all of its components has failed. The exact component that causes the system to fail is often unknown due to cost and time constraint. For each parallel system at test, we observe its system's failure time and a set of component that includes the component actually causing the system to fail. The stress-life relationship is modelled using inverse power law, and cumulative exposure model is assumed to model the effect of changing stress. The optimal plan consists in finding out the optimum stress rate using D-optimality criterion. The method developed has been explained using a numerical example and sensitivity analysis carried out.

• Transactions of Materials Processing
• /
• v.25 no.2
• /
• pp.91-95
• /
• 2016

This paper is concerned with modeling of a ductile fracture criterion for sheet metal considering anisotropy to predict the sudden fracture of advanced high strength steel (AHSS) sheets during complicated forming processes. The Lou−Huh ductile fracture criterion is modified using the Hill’s 48 anisotropic plastic potential instead of the von Mises isotropic plastic potential to take account of the influence of anisotropy on the equivalent plastic strain at the onset of fracture. To determine the coefficients of the model proposed, a two dimensional digital image correlation (2D-DIC) method is utilized to measure the strain histories on the surface of three different types of specimens during deformation. For the derivation of an anisotropic ductile fracture model, principal stresses (𝜎₁,𝜎₂, 𝜎₃) are expressed in terms of the stress triaxiality, the Lode parameter, and the equivalent stress (𝜂_𝐻, 𝐿,) based on the Hill’s 48 anisotropic plastic potential. The proposed anisotropic ductile fracture criterion was quantitatively evaluated according to various directions of the maximum principal stress. Fracture forming limit diagrams were also constructed to evaluate the forming limit in sheet metal forming of AHSS sheets over a wide range of loading conditions.

• The Korean Journal of Applied Statistics
• /
• v.27 no.7
• /
• pp.1269-1278
• /
• 2014

Despite the D-optimality criterion becomes very popular in designing an experiment for nonlinear models because of theoretical foundations it provides, it is very critical that the criterion depends on the unknown parameters of the nonlinear model. But some nonlinear models turned out to be partially nonlinear in sense that the optimal design depends on the subset of parameters only. It was a strong belief that the maximin approach to find a robust design to protect against the uncertainty of parameters is not guaranteed to be successful in nonlinear models. But the maximin approach could be a success for the partial nonlinear model, because often the optimal design depends on only one unknown value of parameter, easier to handle than the full parameters. We deal with maximin approach for Michaelis-Menten model with respect to D- and $D_s$-optimality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.905-912
• /
• 2007

This paper proposes an efficient estimation and compensation scheme of IQ imbalance for OFDM-based WLAN systems in the presence of symbol timing error. Since the conventional scheme assumes perfect time synchronization, the criterion of the scheme used to derive the estimation of IQ imbalance is inadequate in the presence of the symbol timing error and the system performance is seriously degraded. New criterion and compensation scheme considering the effect of symbol timing error are proposed. With the proposed scheme, the IQ imbalance can be almost perfectly eliminated in the presence of symbol timing error. The bit error rate performance of the proposed scheme is evaluated by the simulation. In case of 54 Mbps transmission mode in IEEE 802.11a system, the proposed scheme achieves a SNR gain of 4.3dB at $BER=2{\cdot}10^{-3}$. The proposed compensation algorithm of IQ imbalance is implemented using Verilog HDL and verified. The proposed IQ imbalance compensator is composed of 74K logic gates and 6K bits memory from the synthesis result using 0.18um CMOS technology.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.205-212
• /
• 2021

In this study, two types of thrust stand modeling were proposed for the design of a thrust stand using flexure. Type A model generate combined load for tangential (thrust) and axial compressive load (self weight). And type B generate combined load for tangential and axial tensile load. The research was done by comparing the influence of the load between the models through a 1D calculation and computational analysis. The 1D calculated value and the computational analysis value were compared for a total of 10 sections and the results were confirmed to be very similar. In order to prove the validity of the analysis results, the equivalent stress was confirmed from the computational analysis of the flexure, and the production of the Type B model was selected from the evaluation of the yield condition (Von-Mises Yield Criterion).

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.3
• /
• pp.649-660
• /
• 2020

This paper proves a new regularity criterion for solutions to the Cauchy problem of the 3D Boussinesq equations via one directional derivative of the horizontal component of the velocity field (i.e., (∂_iu₁; ∂_ju₂; 0) where i, j ∈ {1, 2, 3}) in the framework of the anisotropic Lebesgue spaces. More precisely, for 0 < T < ∞, if $$\large{\normalsize\displaystyle\smashmargin{2}{\int\nolimits_o}^T}({\HUGE\left\|{\small{\parallel}{\partial}_iu_1(t){\parallel}_{L^{\alpha}_{x_i}}}\right\|}{\small^{\gamma}_{L^{\beta}_{x_{\hat{i}}x_{\bar{i}}}}+}{\HUGE\left\|{\small{\parallel}{\partial}_iu_2(t){\parallel}_{L^{\alpha}_{x_j}}}\right\|}{\small^{\gamma}_{L^{\beta}_{x_{\hat{i}}x_{\bar{i}}}}})dt<{{\infty}},$$ where ${\frac{2}{{\gamma}}}+{\frac{1}{{\alpha}}}+{\frac{2}{{\beta}}}=m{\in}[1,{\frac{3}{2}})$ and ${\frac{3}{m}}{\leq}{\alpha}{\leq}{\beta}<{\frac{1}{m-1}}$, then the corresponding solution (u, θ) to the 3D Boussinesq equations is regular on [0, T]. Here, (i, ${\hat{i}}$, ${\tilde{i}}$) and (j, ${\hat{j}}$, ${\tilde{j}}$) belong to the permutation group on the set 𝕊₃ := {1, 2, 3}. This result reveals that the horizontal component of the velocity field plays a dominant role in regularity theory of the Boussinesq equations.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.23
• /
• pp.2-13
• /
• 2007

With the effectuation of the amendment of MARPOL 73/78 on 5 April 2005, enforcement regulations of Marine Pollution Prevention Act were revised in domestic on 12 March 2005 that double hull structure was required to the small single bottom oil tankers under DWT(deadweight tonnage) 500 ton for the protection of the marine pollution casualties. The objective of this study is to develop the double bottom structure of small oil tanker under DWT 500 ton with superior crashworthiness and to establish its suitable standard to double bottom structure. The promoting strategy of this R&D is classified into the crashworthy structural analysis of small oil tankers using LS/DYNA3D code and the examination of their damage stabilities according to tonnage. It could be thought that the desirable inner bottom height should be above the B/7.5 and its minimum height 0.65m for the domestic small oil tanker under DWT 500ton.

• The KIPS Transactions:PartD
• /
• v.16D no.6
• /
• pp.911-920
• /
• 2009

Airbone software must comply the DO-178B standard in order to be certified by the FAA. The standard requires the unit testing of safety-critical software to meet the coverage criterion called MC/DC(Modified Condition/Decision Coverage). Although MC/DC is known to be effective in finding errors related to safety, it is also true that generating test cases which satisfy the MC/DC criterion is not easy. This paper presents a tool named MD-SAT which generates MC/DC test cases with SAT(SATisfiability) technology. It can be employed for generating diverse test cases in tools implementing various testing techniques including decision table based test, cause-effect graphing, and state-based test.

• Journal of Environmental Health Sciences
• /
• v.48 no.5
• /
• pp.266-271
• /
• 2022

Background: The selection of distributions of input parameters is an important component in probabilistic exposure assessment. Goodness-of-fit (GOF) methods are used to determine the distribution of exposure factors. However, there are no clear guidelines for choosing an appropriate GOF method. Objectives: The outcomes of probabilistic consumer exposure assessment were compared by using five different GOF methods for the selection of input distributions: chi-squared test, Kolmogorov-Smirnov test (K-S), Anderson-Darling test (A-D), Akaike information criterion (AIC) and Bayesian information criterion (BIC). Methods: Individual exposures were estimated based on product usage factor combinations from 10,000 respondents. The distribution of individual exposure was considered as the true value of population exposures. Results: Among the five GOF methods, probabilistic exposure distributions using the A-D and K-S methods were similar to individual exposure estimations. Comparing the 95th percentiles of the probabilistic distributions and the individual estimations for 10 CPs, there were 0.73 to 1.92 times differences for the A-D method, and 0.73 to 1.60 times differences (excluding tire-shine spray) for the K-S method. Conclusions: There were significant differences in exposure assessment results among the selection of the GOF methods. Therefore, the GOF methods for probabilistic consumer exposure assessment should be carefully selected.

• Journal of the Korean Mathematical Society
• /
• v.45 no.2
• /
• pp.537-558
• /
• 2008

Consider a weak solution u of the Navier-Stokes equations in the class $L^2((0,T);X_1(\mathbb{R}^d)^d)$. We establish a new approach to treat the regularity problem for the Navier-Stokes equation in term of the multiplier space $X_1(\mathbb{R}^d)$.