• 제목/요약/키워드: $Cu_xCo_{3-x}O_4$

검색결과 94건 처리시간 0.029초

네자리 Schiff Base 리간드의 금속착물에 관한 연구 (Studies on the Metal Complexes with the Tetradentate Schiff Base Ligand)

  • 조기형;오상오;김찬호
    • 대한화학회지
    • /
    • 제18권3호
    • /
    • pp.194-201
    • /
    • 1974
  • 네자리 schiff리간드는 salicylaldehyde와 m-phenylenediamine을 Duff-반응 시킴으로써 N,N-bis(salicylaldehyde)-m-phenylenediimine을 합성하고 이 리간드와 Cu(II), Ni(II), Co(II) 및 Zn(II) 이온들과의 새로운 착물 Cu(II)$[C_{20}H_{14}O_2N_2]{\cdot}2H_2O, Co(II)[C_{20}H_{14}O_2N_2]{\cdot}2H_2O$ 및 Zn(II)$[C_{20}H_{14}O_2N_2]{\cdot}4H_2O$들을 합성하였다. 이들 착물에 대하여 가시부 흡수스펙트럼, 적외선스펙트럼, TGA, X-ray 회절 및 원소분석 결과에 의하여 Cu(II), Ni(II) 및 Co(II) 착물들은 리간드와 금속이 1:1 몰비 및 2수화물의 6배위 착물로 주어지며 Zn(II) 착물은 1:2 몰비 4배위 착물로 주어짐을 알았다

  • PDF

무가압 침투법에 의해 제조된 $Al-5Mg-X(Si,Cu,Ti)/SiC_p$ 복합재료의 조직 및 마멸특성 (Microstructure and Wear Property of $Al-5Mg-X(Si,Cu,Ti)/SiC_p$ Composites Fabricated by Pressureless Infiltration Method)

  • 우기도;김석원;안행근;정진호
    • 한국주조공학회지
    • /
    • 제20권4호
    • /
    • pp.254-259
    • /
    • 2000
  • Metal matrix composites(MMCs) reinforced with hard particles have many potential application in aerospace structures, auto parts, semiconductor package, heat resistant panels, wear resistant materials and so on. In this work, the effect of SiC partioel sizes(50 and 100 ${\mu}m$) and additional elements such as Si, Cu and Ti on the microstructure and the wear property of $Al-5Mg-X(Si,Cu,Ti)/SiC_p$ composites produced by pressureless infiltration method have been investigated using optical microscopy, scanning eletron microcopy(SEM) with EDS(energy dispersive spectrometry), hardness test, X-ray diffractometer(XRD) and wear test. In present study, the sound $Al-5Mg-X(Si,Cu,Ti)/SiC_p$(50 and 100 ${\mu}m$) composites were fabricated by pressureless infiltration method. The $Al-5Mg-0.3Si-O.1Cu-O.1Ti/SiC_p$ composite with $50 {\mu}m$ size of SiC particle has higher hardness and better wear property than any other composite with $100{\mu}m$ size of SiC particle produced by pressureless infiltration method. The hardness and wear property of $Al-5Mg/SiC_p$(50 and 100 ${\mu}m$) composites were enhanced by the addition of Si, Cu and Ti in Al-5%Mg matrix alloy.

  • PDF

Photocatalytic Degradation of Oxytetracycline Using Co-precipitation Method Prepared Fe2O3/TiO2 Nanocomposite

  • Jia, Yuefa;Liu, Chunli;Li, Rong
    • Journal of Magnetics
    • /
    • 제21권1호
    • /
    • pp.46-50
    • /
    • 2016
  • $Fe_2O_3/TiO_2$ nanocomposite were successfully synthesized by co-precipitation method using $Fe(NO_3)_3{\cdot}9H_2O$ and $Ti(SO_4)_2$ as raw materials. Structural and textural features of the mixed oxide samples were characterized by X-ray diffractometer, field emission scanning electron microscopy and energy-dispersive X-ray. The effects of initial concentration of oxytetracycline (OTC), different competitive ions and organics on the photocatalytic degradation rate of OTC by the $Fe_2O_3/TiO_2$ nanocomposite were analyzed under UV and visible light irradiation. The results indicate that the optimized initial concentration of OTC was 50 mg/L to achieve the best photocatalytic efficiency. $Cu^{2+}$, $NH_4{^+}$, $C_3H_8O$ and EDTA in the aqueous suspension were found to suppress the degradation rate of OTC, whereas the effect of $NO_3{^-}$ and $H_2C_2O_4$ can be ignored.

무전해 도금을 이용해 제작한 Pd, Pd/Cu 분리막의 수소 투과 성능 (Hydrogen Permeation Performance of Pd, Pd/Cu Membranes Manufactured through Electroless Plating)

  • 이정인;신민창;장학룡;황재연;정창훈;박정훈
    • 멤브레인
    • /
    • 제32권6호
    • /
    • pp.456-464
    • /
    • 2022
  • 본 실험에서는 무전해 도금을 통하여 Pd 및 Pd-Cu 분리막을 제조하여 수소 투과 성능을 분석하였다. 분리막의 지지체는 α-Al2O3 세라믹 중공사를 사용하였다. Pd-Cu 분리막은 무전해 도금을 실시하였고 Pd-Cu 합금을 만들기 위하여 수소 분위기에서 500°C, 18 h 동안의 열처리 과정을 거쳤다. 그 후, Pd-Cu 분리막은 EDS (Energy Dispersive X-ray Spectroscopy), XRD (X-ray Diffraction) 분석을 통해 합금이 형성된 것을 확인하였다. Pd 및 Pd-Cu 도금층의 두께는 SEM (Scanning Electron Microscope) 분석을 통해 각각 약 3.21, 3.72 µm으로 측정되었다. 수소 투과 성능은 수소 단일 가스, 혼합가스(H2, N2)에서 350~450°C, 1~4 bar의 범위에서 수소 투과 실험을 진행하였다. 수소 단일 가스에서 Pd 및 Pd-Cu 분리막은 450°C, 4 bar에서 최대 54.42, 67.17 ml/cm2⋅min의 flux를 가지며, 혼합가스에서는 450°C, 4 bar의 조건일 때, 각각 1308, 453의 separation factor가 나오는 것을 확인하였다.

세자리 리간드의 전이금속 착물에 대한 합성과 전위차 및 분광학적 확인 그리고 미생물학적 연구 (Synthesis, Potentiometric, Spectral Characterization and Microbial Studies of Transition Metal Complexes with Tridentate Ligand)

  • Jadhav, S.M.;Munde, A.S.;Shankarwar, S.G.;Patharkar, V.R.;Shelke, V.A.;Chondhekar, T.K.
    • 대한화학회지
    • /
    • 제54권5호
    • /
    • pp.515-522
    • /
    • 2010
  • o-phenylene diamines, dehydroacetic acid (DHA) 및 p-chloro benzaldehyde에서 유도된 세자리 Schiff 염기 리간드인 4-hydroxy-3(1-{2-(benzylideneamino)-phenylimino}-ethyl)-6-methyl-2H-pyran-2-one (HL)의 Cu(II), Ni(II), Co(II), Mn(II) 및 Fe(III) 착물의 형성상수와 항미생물 활성과의 관계를 연구하였다.리간드와 착물은 원소분석, 전도도, 자기수자율, 열분석, X-선 회절, IR, $^1H$-NMR, UV-vis 및 질량 스펙트럼으로 특성조사를 하였다. 분석데이터로부터 착물들의 화학량론비가 1:2 (금속:리간드)임을 알았다. 금속 착물들의 몰 전도도 값은 이들의 비전해질 성질을 의미한다. X-선 회절 데이터에서 Ni(II) 착물은 단사정계 그리고 Cu(II) 및 Co(II) 착물은 삼사정계 결정계임을 규명하였다. IR 스펙트럼 데이터로부터 리간드는 중심금속에 대해 ONN 주개원자 배열의 세자리 리간드로 행동함을 알았다. 열적 행동 (TG/DTA)과 Coats-Redfern 법에 의해 계산한 반응속도 파라메터는 착물형성 과정에서 좀 더 질서 있는 활성화 상태를 제안하고 있다. 착물의 양성자화 상수를 THF:물 (60:40) 용액, $25^{\circ}C$ 및 이온세기 ${\mu}=0.1\;M$ ($NaClO_4$)에서 전위차법으로 측정하였다. Staphylococcus aureu 및 Escherichia coli.에 대한 항박테리아 활성을 시험관에서 조사하였다. 또한 Aspergillus Niger 및 Trichoderma에 대한 항세균 활성도 조사하였다. 금속 이온 및 착물의 안정도가 항미생물학적 활성에 미치는 영향을 고찰하였다.

인쇄회로기판상의 금속 배선을 위한 구리 도금막 형성 : 무전해 중성공정 (Electroless Plated Copper Thin Film for Metallization on Printed Circuit Board : Neutral Process)

  • 조양래;이연승;나사균
    • 한국재료학회지
    • /
    • 제23권11호
    • /
    • pp.661-665
    • /
    • 2013
  • We investigated the characteristics of electroless plated Cu films on screen printed Ag/Anodized Al substrate. Cu plating was attempted using neutral electroless plating processes to minimize damage of the anodized Al substrate; this method used sodium hypophosphite instead of formaldehyde as a reducing agent. The basic electroless solution consisted of $CuSO_4{\cdot}5H_2O$ as the main metal source, $NaH_2PO_2{\cdot}H_2O$ as the reducing agent, $C_6H_5Na_3O_7{\cdot}2H_2O$ and $NH_4Cl$ as the complex agents, and $NiSO_4{\cdot}6H_2O$ as the catalyser for the oxidation of the reducing agent, dissolved in deionized water. The pH of the Cu plating solutions was adjusted using $NH_4OH$. According to the variation of pH in the range of 6.5~8, the electroless plated Cu films were coated on screen printed Ag pattern/anodized Al/Al at $70^{\circ}C$. We investigated the surface morphology change of the Cu films using FE-SEM (Field Emission Scanning Electron Microscopy). The chemical composition of the Cu film was determined using XPS (X-ray Photoelectron Spectroscopy). The crystal structures of the Cu films were investigated using XRD (X-ray Diffraction). Using electroless plating at pH 7, the structures of the plated Cu-rich films were typical fcc-Cu; however, a slight Ni component was co-deposited. Finally, we found that the formation of Cu film plated selectively on PCB without any lithography is possible using a neutral electroless plating process.

Ni-Zn Ferrite의 자기특성에 미치는 소결온도와 첨가제의 영향 (The Effect of Additions and Sintering Temperature on Magnetic Properties of Ni-Zn Ferrite)

  • 이병하
    • 한국세라믹학회지
    • /
    • 제18권2호
    • /
    • pp.83-90
    • /
    • 1981
  • In this study, the effect of additions on magnetic properties in the system of [$Ni_{0.32}Zn_{0.68}$] 1-x Mx $Fe_2O_4$ have been investigated. The additions, Co or Mg or Cu, was added in turn in place of M, and its composition was varied from 0.1 mo1% to 0.5 mo1%. The materials were blended by hot petroleum drying method, and sintered with the rate of 30$0^{\circ}C$/h in the air. The sintering temperatures were varied from 110$0^{\circ}C$ to 130$0^{\circ}C$, with the intervals of 5$0^{\circ}C$, and matured for 3hrs. The results are: 1) The permeability decreased when the addition, MgO or CoO, was added, and it increased when CuO was added. 2) Resistivity had the lowest Value when CuO was added.

  • PDF

Structure Identification of 1,2-Disubstituted Chiral Calix[4]arene : X-Ray and NMR Analysis of 25-(3,5-Dinitrobenzoyloxy)-26-methoxy-27,28-dihydroxycalix[4]arene

  • 박영자;신정미;남계춘;김종민;국승근
    • Bulletin of the Korean Chemical Society
    • /
    • 제17권7호
    • /
    • pp.643-647
    • /
    • 1996
  • 1,2-Disubstituted chiral calix[4]arene "25-(3,5-dinitrobenzoyloxy)-26-methoxy-27,28-dihydroxycalix[4]arene" was synthesized by the reaction of 25-(3,5-dinitrobenzoyloxy)-calix[4]arene with methyl iodide in the presence of K2CO3. Methylation was occurred at the 26-position of calix[4]arene. The partial cone conformation and 1,2-substitution were characterized based on the 1H NMR, 13C NMR and X-ray diffraction analysis. The crystal structure has been determined by X-ray diffraction method. The crystals are orthorhombic, Pbca, a=10.652(1), b=17.687(1), c=32.247(3) Å, Z=8, V=6075.4(9) Å3, Dc=1.38gcm-3. The intensity data were collected on an Enraf-Nonius CAD-4 Diffractometer with a graphite monochromated Cu-Kα radiation. The structure was solved by direct method and refined by full-matrix least-squares methods to a final R value of 0.050 for 2368 observed reflections. The molecule is in the partial cone conformation. It has two strong intramolecular hydrogen bonds of O(1D)-H…O(1C)-H…O(1B).

CuO가 첨가된 WO3-SnO2 후막 가스센서 특성 연구 (Characteristics of CuO doped WO3-SnO2 Thick Film Gas Sensors)

  • 이돈규;신덕진;유일
    • 한국전기전자재료학회논문지
    • /
    • 제23권12호
    • /
    • pp.956-960
    • /
    • 2010
  • CuO doped $WO_3-SnO_2$ thick film gas sensors were fabricated by screen printing method on alumina substrates and heat-treated at $350^{\circ}C$ in air. The effects of mixing ratio of $WO_3$ with $SnO_2$ on the structural and morphological properties of $WO_3-SnO_2$ were investigated X-ray diffraction and Scanning Electron Microscope. The structural properties of the $WO_3-SnO_2$:CuO thick film by XRD showed that the monoclinic of $WO_3$ and the tetragonal of $SnO_2$ phase were mixed. Nano CuO was coated on the $WO_3-SnO_2$ surface and then the surface of $WO_3$ was coated with $SnO_2$ particles with $1\sim1.5{\mu}m$ in diameters, as confirmed form the SEM image. The sensitivity of the $WO_3-SnO_2$:CuO sensor to 2000 ppm $CO_2$ gas and 50 ppm $H_2S$ gas for the various ratio of $WO_3$ and $SnO_2$ was investigated. The 4 wt% CuO doped $WO_3-SnO_2$(75:25) tkick films showed the highest sensitivity to $CO_2$ gas and $H_2S$ gas.

COMPOSITION OF SUPERCONDUCTING YBCO THIN FILMS WITH RF REACTIVE SPUTTERING CONDITIONS

  • Kim, H.H.;Kim, S.;Shin, S.H.;Park, J.I.;Park, K.J.
    • 한국표면공학회지
    • /
    • 제29권6호
    • /
    • pp.829-833
    • /
    • 1996
  • Superconducting YBaCuO thin films were deposited on MgO (100) single crystal substrate by rf reactive sputtering method. Sputtering target was prepared by mixing the original powders of $Y_2O_3$, $BaCO_3$, and CuO at $830^{\circ}C$, and its composition was $YBa_2Cu_{3.3}O_x$ adding the excess CuO to compensate for the loss of Cu in the deposition process. The sputtering conditions for a high quality of YBCO thin film were: substrate temperature of 13$0^{\circ}C$; gas pressure of 10 mTorr; gas mixture ($O_2$: Ar =10: 90); distance of 2.5 inch; and rf power density of 4.87 W /$\textrm{cm}^2$. The deposition rate was 2.4~2.6 nm/min. From the RBS results, it was found that Cu and Ba contents in thin films decreased with the increase of substrate temperature. The increase of gas pressure resulted in significant deficiency of Ba elements.

  • PDF