• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.1-5
• /
• 1998

A spectrophotometric method was developed for the acidic solution stripped after an extraction of 0.5 to 2.5 ppm of Lead(II) from 50 mL of $Na_2S_2O_3$ solution into chloroform as the ion-pairs formed between their thiosulfate complexes and alkylamine, Aliquat336. Pb(II) in the stripped solution forms an complex with DDTC in pH 7.3 buffer solution, and was developed in yellow by copper replacement. The ydlow-colored solution have the maximum absorbance at 435 nm in the measurement of absorbance by UV-Visible spectrophotometer. The interference ions such as Fe(III), Hg (II), Al(III), Co, Cu, Ni, Zn, Ca, Sn, have great effects on the extraction, but they were overcomed by the usage of adequate masking agents before an extraction. At last, a good result was obtained in applying this method to synthetic water.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2326-2330
• /
• 2014

A carbazole-based Schiff base CB2 was synthesized and applied as a highly selective and sensitive fluorescent probe for $Cu^{2+}$ in $H_2O$-DMSO (8/2, v/v, pH = 7.4) solution. CB2 exhibits an excellent selectivity to $Cu^{2+}$ over other examined metal ions with a prominent fluorescence "turn-on" at 475 nm. CB2 and $Cu^{2+}$ forms a 1:2 binding ratio complex with detection limit of $9.5{\mu}M$. In addition, the $Cu^{2+}$ recognition process is hardly interfered by other examined metal ions.

• Journal of the Korean Magnetics Society
• /
• v.11 no.1
• /
• pp.14-20
• /
• 2001

The structure, shape, size, and magnetic properties of Ni$_{0.5}$Cu$_{0.1}$Zn$_{0.4}$Fe$_2$O$_4$ have been investigated as a function of annealing temperatures. In order to control the microwave absorbing properties of ferrite-rubber composite and the complex losses (magnetic loss and conduction loss), the effect of carbon addition was also studied. It was found that the coercive force decreased with increasing heat-treatment temperatures. Relative complex permeability and reflection loss were measured by the network analyzer. As a result, the natural resonance occurred in the low frequency tinge, and the matching frequency of the ferrite-rubber composite prepared at 130$0^{\circ}C$ was found to be lower. As heat-treatment temperatures were increased, the magnetic loss ($\mu$$_{r}$", $\mu$$_{r}$′) and the dielectric loss ($\varepsilon$$_{r}$"/$\varepsilon$$_{r}$′) were increased. It was caused that the absorption characteristics of the absorber were improved. The conduction loss and magnetic loss were expected to be occurred together because two matching frequencies were shown with carbon addition. It was confirmed that the matching frequency of the microwave absorber could be controlled by controlling heat-treatment temperatures and carbon additions.ons.tions.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1572-1576
• /
• 2006

A dimeric precursor, $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ for the CVD of copper metal films, (dmaeH = N,N-dimethylaminoethanol) was synthesized by the reaction of copper(II) acetate monohydrate ($Cu(OCOCH_3)_2{\cdot}H_2O$) and dmaeH in toluene. The product was characterized by m.p. determination, elemental analysis and X-ray crystallography. Molecular structure of $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ shows that a dimeric unit $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ is linked to another through hydrogen bond and it undergoes facile decomposition at 300 C to deposit granular copper metal film under nitrogen atmosphere. The decomposition temperature, thermal behaviour, kinetic parameters, evolved gas pattern of the complex, morphology, and the composition of the film were also investigated.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.250-258
• /
• 1999

The purpose of this study was to compare heavy metal concentrations in uncontaminated soil with those in soil influenced by industrial activities, and to investigate the relationship between change of heavy metal content and the kind of industry at the Iksan 2nd Industrial Complex that has started since 1995. Soils sampled in 0-3 cm and 3-6 cm soil depth, respectively were analized for content of Cd, Cu, Ni, Pb and Zn. The content of Cd in soil layer of 0 to 3 cm was 0.07-4.37ppm range, average concentration was 0.516ppm and 3-6 cm was 0.07-8.52ppm range, average concentration was 0.380ppm. Area of the chemicals, dyes and metal products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Cu in soil layer of 0 to 3 cm was 0.61-42.62ppm range, average concentration was 11.087ppm and 3-6 cm was 0.16-35.45ppm range, average concentration was 7.578ppm. Area of the metal products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Ni in soil layer of 0 to 3 cm was 0.19-15.93ppm range, average concentration was 5.525ppm and 3-6 cm was 0.39-15.59ppm range, average concentration was 5.310ppm. Area of the metal and chemical products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Pb in soil layer of 0 to 3 cm was 3.10-55.75ppm range, average concentration was 23.543ppm and 3-6 cm was 3.35-46.55ppm range, average concentration was 19.198ppm. Area of the chemicals and metal products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Zn in soil layer of 0 to 3 cm was 26.50-943.00ppm range, average concentration was 158.329ppm and 3-6 cm was 35.45-882.45ppm range, average concentration was 127.914ppm. Area of the chemicals and metal products manufacturing were higher than the other manufacturing area in Industrial Complex. As the result, this study was to compare Cd, Cu, Ni, Pb, Zn average concentration in uncontaminated soil of world with those in soil, that Cu, Ni were uncontaminated concentration level, Cd was somewhat higher compare with the concentration level of world, Pb and Zn were very higher. Soil contaminated degree of Iksan 2nd Industrial Complex was known a difference by type of industrial activities(chemical, dyes and metal of products)

• Korean Journal of Crystallography
• /
• v.16 no.1
• /
• pp.38-42
• /
• 2005

The crystal structure of Bis(ethylenediamine) cuprate(II)$\cdot$dichromate, $Cu(C_2H_8N_2)_2{\cdot}Cr_2O_7$, has been determined by X-ray crystallography. Crystal data: a=5.682(2), b=8.567(3), c=14.839(3) ${\AA},\;{\alpha}=97.50(2),\;{\beta}=101.06(1),\;{\gamma}=109.38(2)^{\circ}$ Triclinic, P-1 (SG No=2), Z=2, V=653.9(2) ${\AA}^3,\;D_c=2.030gcm^{-3},\;{\mu}=3.273mm^{-1}$. The structure was solved by Patterson method and refined by full matrix least-square methods uslng unit weights. The final R and S values were $R_1=0.0256,\;R_w=0.0708,\;R_{all}=0.0316,\;S=1.151$ for the observed 2291 reflections. The two cupper complex ion has the usual distorted octahedral structure with mean four Cu-N distances of 2.010(3) $\AA$ and the longer mean Cu-O distance of 2.525(2) $\AA$. The Cu-complex and dichromate ions are linked to form infinite chain arranged alternatively along the [111]-direction. The neighboring chains in the (0-11) plane are connected with N1-O5 and N3-O1 hydrogen bonds.

• Journal of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.385-391
• /
• 1979

It was found that cupric ion selective electrode, which was prepared by mixing CuS and $Ag_2S$ with the ratio four to one and PVC, was hard and durable. The response potentials were reproducible and linear in the range from 1.0 ${\times}$ $10^{-1}M$ to 1.0 ${\times}$ $10^{-5}M$ copper (II) solution and its slope was 25.0 mV per decade concentration at $298^{\circ}K$, slightly different from Nernstian slope. The copper (II) indicating electrode was applied in precipitation titration of 1.0 ${\times}$ $10^{-2} M Cu(II)$ sample solution containing proper amounts $NaNO_3$ with 0.1 M NaOH standard solution. Also, this electrode could be used in complex titration of Zn(II), Mg(II), Ca(II) with EDTA and stability constant of EDTA complex of Ca(II) and Mg(II) was calculated by using known Cu-$EDTA^{2-}$ stability constant.

• Journal of the Korean Chemical Society
• /
• v.62 no.5
• /
• pp.372-376
• /
• 2018

A 1D-coordination polymer of $1D-\{Cu({\mu}-picolinato)_2\}$ $\{Hakimi,\;2012\;\sharp73\}_n$ (1), was prepared by the reactions between 2-(2-(pyridin-2-yl)oxazolidin-3-yl)ethanol (AEPC) ligand and $CuCl_2$ or $CuBr_2$. The product was characterized by elemental analysis, UV-Vis, FT-IR spectroscopy and single-crystal X-ray diffraction. The X-ray analysis results revealed that the AEPC ligand, after reactions with the copper(II) chloride or bromide, gives the same product - $1D-\{Cu({\mu}-picolinato)_2\}_n$ (1). The coordination modes for various picolinate-based ligands were extracted from the Cambridge Structural Database (CSD). In the crystal structure of 1, the copper atom has a $CuN_2O_4$ environment and octahedral geometry, which is distorted by elongation of the axial bond lengths due to the Jahn-Teller effect.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.2
• /
• pp.85-88
• /
• 1990

The electron paramagnetic resonance (EPR) spectrum of the copper (II) complex with the 2-methylamino-1-cyclo-pentene-1-dithiocarboxylate (acdc) anion, $Cu(N-CH_3acdc)_2$ has been studied in the diamagnetic host lattices afforded by the corresponding divalent nickel, zinc, cadmium and mercury complexes. EPR parameters of the complex support the exclusive use of sulfur atoms by the ligand in metal binding. A combination of host lattice structure and covalency effects can be account for the observed spin-Hamiltonian parameters.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.2905-2908
• /
• 2013

Fluorescent and colorimetric recognition properties of 2-(4-N-phenyl-3-thiosemicarbazone)-8-hydroxyquinoline (1) in buffered aqueous solution (1% DMSO, HEPES 20 mM, pH = 7.4) have been examined. Sensor 1 displays highly selective and sensitive recognition to $Cu^{2+}$ with fluorescence "ON-OFF" performance. The in situ formed 1-$Cu^{2+}$ complex exhibits an excellent selectivity toward sulfide ions with fluorescence "OFF-ON" behavior via $Cu^{2+}$ displacement approach. Thus, relay recognition of $Cu^{2+}$ and sulfide by a known molecule 1 has been achieved.