• 청정기술
• /
• 제25권3호
• /
• pp.223-230
• /
• 2019

본 연구에서는 강원도 5개 지자체에서 발생된 음식물류 폐기물의 특성을 분석하고 메탄가스 발생량을 평가하였다. 시료는 2017년 7월과 9월에 걸쳐 총 2회 채취하였다. 메탄가스 발생가능량을 평가하기 위하여 BMP (biochemical Methane potential) 시험과 원소조성을 이용한 계산방법을 이용하였다. 음식물류 폐기물의 겉보기밀도는 평균 $0.758{\sim}0.850g\;cm^{-3}$, pH는 4.29 ~ 4.75이었다. 물리적 조성 중 주성분은 채소류가 56.43 ~ 72.81%로 가장 높았고, 과일류는 5.31 ~ 8.95%, 곡물류는 1.60 ~ 18.73%, 어육류는 4.47 ~ 12.11%, 여액은 1.76 ~ 3.64%이었다. 평균 수분함량은 69.30 ~ 75.87%, 가연분함량은 22.50 ~ 27.98%, 회분함량은 1.63 ~ 2.48%를 나타내었다. 또한 $BOD_5$는 $17,690.3{\sim}33,154.9mg\;L^{-1}$, $COD_{Cr}$은 $106,212.3{\sim}128,695.5mg\;L^{-1}$, 그리고 $COD_{Mn}$은 $51,266.1{\sim}63,426.3mg\;L^{-1}$의 범위를 보였고 NaCl 함량은 0.81 ~ 1.17%의 범위를 나타내었다. 원소분석 결과 C, H, O, N, S 함량은 각각 44.87 ~ 48.16%, 7.12 ~ 7.57%, 40.13 ~ 43.78%, 3.22 ~ 4.14%, 그리고 0.00 ~ 0.02%를 나타내었다. 음식물류 폐기물의 VS 단위질량당 메탄수율을 살펴보면 BMP 시험에 의한 메탄가스 발생누적량(${0.303{\sim}0.354m_{CH4}}^3\;{kg_{VS}}^{-1}$)은 원소조성과 생분해율을 반영하여 예측한 결과(${0.294{\sim}0.352m_{CH4}}^3\;{kg_{VS}}^{-1}$)와 큰 차이가 없었다.

• 한국농공학회논문집
• /
• 제59권3호
• /
• pp.1-10
• /
• 2017

The aim of this study is to investigate the chemical properties and heavy metal concentration of soils in conventional and organic paddy. We sampled and analyzed topsoil (0~15 cm) and subsoil (15~30 cm) of conventional and organic paddy fields in Yongin and Anseong, South Korea. The statistical significance between groups was determined by Duncan's multiple range test and correlation between soil properties was also analyzed. The results show that organic matter (OM) and T-N of conventional paddy soil were higher than those of organic paddy soil. However, higher T-P concentration was observed in organic paddy soil than conventional paddy soil. As, Pb, and Zn concentration in organic paddy soil were statistically lower than those in conventional paddy soil. The couple of water content (WC) & As, OM & T-N, T-P & $P_2O_5$, T-P & Zn, $P_2O_5$ & Zn, and Cr & Ni had a good positive correlation but the couple of WC & T-P, WC & Zn, T-P & As, and As & Zn had a strong negative correlation. It can be concluded that organic farming is beneficial to soil environment by reducing the amounts of organic matter, T-N, As, Pb, and Zn concentration in paddy soil when compared to conventional farming.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1069-1074
• /
• 2019

A novel fabrication method of oxide dispersion strengthened (ODS) steel cladding tubes for advanced fast reactors has been investigated using the cold spray powder-based materials deposition process. Cold spraying has the potential advantage for rapidly fabricating ODS cladding tubes in comparison with the conventional multi-step extrusion process. A gas atomized spherical 14YWT (Fe-14%Cr, 3%W, 0.4%Ti, 0.2% Y, 0.01%O) powder was sprayed on a rotating cylindrical 6061-T6 aluminum mandrel using nitrogen as the propellant gas. The powder lacked the oxygen content needed to precipitate the nanoclusters in ODS steel, therefore this work was intended to serve as a proof-of-concept study to demonstrate that free-standing steel cladding tubes with prototypical ODS composition could be manufactured using the cold spray process. The spray process produced an approximately 1-mm thick, dense 14YWT deposit on the aluminum-alloy tube. After surface polishing of the 14YWT deposit to obtain desired cladding thickness and surface roughness, the aluminum-alloy mandrel was dissolved in an alkaline medium to leave behind a free-standing ODS tube. The as-fabricated cladding tube was annealed at $1000^{\circ}C$ for 1 h in an argon atmosphere to improve the overall mechanical properties of the cladding.

• 한국토양비료학회지
• /
• 제43권5호
• /
• pp.590-595
• /
• 2010

토양오염 방지사업에 의해 복원이 완료된 지역인 밀양시 구운동광산의 오염원인 잔존 광미 퇴적지의 광미와 주변 농경지에 대한 오염형태를 조사하여 환경 복원의 기초 자료를 얻고자 수행하게 되었다. 본 연구 대상지는 경남 밀양시 무안면 마흘리 구운동 광산 주변 수계 및 토양으로 조사지의 지질은 신라통 안산암질이며 광산의 광상은 함유 황광으로 주 채굴금속은 금, 은, 동, 납, 아연이었으며, 잔존 광미 퇴적지의 광미와 주변 농경지의 중금속을 분석하였다. 광구 직하류 휴경논 표토 (0-16 cm)의 화학성은 pH는 4.3-4.4내외, 치환성석회 및 고토함량은 각각 0.2 및 0.04 $cmol_c\;kg^{-1}$ 인 반면 토심이 깊어질수록 높아졌다. 광구수 및 광미 적치장 유출수의 직접 영향은 받는 최상류 퇴적토양(SI)의 0.1N HCl 가용성 Cu, Cd, Pb, Cr 및 Ni의 함량은 각각 97, 0.6, 197, 0.28 및 0.12 mg $kg^{-1}$이었고, 최하류 논 (SIII)의 경우 Cu 25, Cd 2.8, Pb 16.7, Cr 0.17 및 Ni 0.44 mg $kg^{-1}$이었다. 휴경지 논 토양 토심별 중금속 함량은 Cr, Pb, Cu는 토심 16 cm 상부에서, Cd, Ni는 토심 16-60 cm 부위에서 높은 분포특성을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제13권2호
• /
• pp.35-44
• /
• 1985

The purposes of this study were, first, to investigate retention levels of toxic elements and oxide individual plies for each panel and, second, to examine disproportioning of individual toxic elements Thirty five water gum plywood panels were treated with a copper-chromium-arsenic preservative (CCA) by the soaking process as the treament time were applied. Such individual plies at a distance of 2.5cm, 7.5cm from the edge were assayed for CuO, $CrO_3$, and $As_2O_5$ on the basis of copper, chromium and arsenic content by Atomic Absorption Spectrophotometry. In these experiments, 12mm thickness plywood panels made of water gum, which were selling, were selected for the preservative treatment. Treating solutions were prepared for 10%, dilute solution of copper-chromium-arsenic preservative and then 1, 3, 6, 12 and 24 hours soaking trements in CCA preservative were applied. The results obtained are as follows: 1. The retention of total oxide in the face and back plies (1+7) retained more than the retention of total oxide in the other plies. The total oxide retention for the individual plies except the face and back plies (1+7) was showed in the following orders; cross plies (3+5), cross plies (2+6), core ply (4). 2. The retentions of total oxide increased as the increase of treatment time. The CCA treated plywood retained high levels of total oxide retention in the face and back plies (1+7). 3. All the retentions in the face and back plies (1+7) is over 5Kg/$m^3$, New Zealand Timber Preservation Standards Specification, and after 6 hours, the retentions in the cross plies (3+5) is over 4. The relative penetration of copper, chromium, and arsenic were not affected by the treatment time. The proportion of arsenic decreased in relation to both copper and chromium and the proportion of copper increased in relation to both chromium and arsenic. 5. A disproportioning of copper, chromium occurred with longer distance from edge, and with longer distance from edge the leachability resistance of CCA treated specimens decreased. After 6 hours (soaking time), the proportion of active elements at a distance of 2.5cm from the edge was consistent. And after 24 hours-soaking, the proportion of active elements at a distance of 7.5cm from the edge was consistent.

• 공업화학
• /
• 제10권6호
• /
• pp.934-938
• /
• 1999

가공제의 종류에 따라 구분한 화학적 처리, 일반 효소 처리 및 바이오-테크 처리에 의해 제조된 나피를 이용하여 가공한 아닐린 유형의 유성혁, 크러스트혁과 도장혁의 물성을 조사하였다. 크러스트혁과 도장혁의 물성은 동일하게 나타난 반면 유성혁의 물성은 다른 경향을 보였다. 도장혁의 경우 세가지 처리 방법 모두 $1.2kg_f/mm^2$의 인장 강도, 30%의 신장률, $3.0kg_f/mm$의 인열 강도, $15kg_f$의 은면 균열 하중 및 2.5%의 크롬 함유량 이상을 나타내어 모두 한국산업규격의 물성을 만족하였다. 특히, 바이오-테크 처리시 다른 두 방법보다 혁의 물성이 뚜렷이 향상되었다. 이는 전자 현미경에 의한 혁의 표면 및 단면 검사와 영상 분석에 의한 모공 검사 결과로 잘 설명되어진다.

• 한국수산과학회지
• /
• 제43권2호
• /
• pp.146-158
• /
• 2010

In order to evaluate the characteristics of sediments and pollution by organic matter and metallic elements in intertidal sediments along the southwestern coast of Korea, we measured various geochemical parameters, including the mean grain size (Mz), water content (WC), ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS), and metallic elements (Al, Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, As), in intertidal surface sediments. The Mz of the surface sediments ranged from 2.1 to 8.3$\phi$, indicating that the surface sediments consist of various sedimentary facies, such as sand, slightly gravelly mud, sandy mud, and silt. The IL and COD in surface sediment ranged from 0.8 to 5.5% (mean $2.9\pm1.2%$) and from 3.9 to $13.8\;mgO_2/g{\cdot}dry$ (mean $8.5\pm2.6\;mgO_2/g{\cdot}dry$), respectively, which were lower than the values for surface sediment in areas near fish and shellfish farms or industrial complexes. No AVS was detected at any sampling station, despite various sedimentary facies. Most of metallic elements in surface sediments showed relatively good positive correlations with Mz and IL, which imply that the concentrations of metallic elements are mainly controlled by grain size and the organic matter content. The concentrations of metallic elements, except As, at some stations were considerably lower than those in the Sediment Quality Guideline (Effect Range Low, ERL) proposed by the National Oceanic and Atmospheric Administration (NOAA) in the United States. Similarly, the geoaccumulation index (Igeo) class indicated that pollution by metallic elements in intertidal surface sediment, except As, was moderate or non-existent. Our results imply that the intertidal surface sediments along the southwestern coast of Korea are not polluted by organic matter and metallic elements and are healthy for benthic organisms.

• Corrosion Science and Technology
• /
• 제11권3호
• /
• pp.96-102
• /
• 2012

0.1 M NaOH 용액에 PbO첨가양이 증가함에 따라 Alloy 600에 형성되는 산화막의 부동태 피막 특성이 열화되었다. 또한 뚜렷한 2중층 구조의 산화막이 점차 사라지고, 산화막내 존재하는 납의 양이 증가하였다. 산화막 내부 납의 양이 증가함에 따라 산화막 내부 니켈의 결핍이 점차 커졌다. 납에 의해 산화막의 부동태 특성이 약화됨에 따라, 응력부식균열 저항성 또한 급감하였을 것으로 판단된다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

• 한국광물학회지
• /
• 제21권2호
• /
• pp.177-182
• /
• 2008

캐나다 브리티시 콜럼비아주 카시아르광산에서 산출되는 B.C. jade에 대한 보석학적 특징을 알아보기 위하여 편광현미경 관찰, 경도, 굴절율 및 비중 측정, X-선회절분석, X-선형광분석, ICP-MS, 적외선흡수분광분석, 시차열분석/열중량분석 등을 실시하였다. B.C. jade는 짙은 녹색을 띠고 반투명하며, 지방광택을 나타내며, 주구성광물은 투각섬석-양기석 고용체이다. 미량의 석류석과 미화인된 불투명광물이 공생한다. 모스 경도는 $5.5{\sim}6$, 굴절율은 1.62, 비중 3.01이다. 인성이 강하며 침상단구를 나나낸다. Fe의 함량이 높으며($Fe_2O_3\;4.14{\sim}4.66\;wt%$) 녹색을 띠게 하는 발색소 역할을 하는 것으로 해석된다. B.C. jade는 $926.9^{\circ}C$에서 탈수현상이 일어나면서 파괴되기 시작하며, $1000.8^{\circ}C$에서 투각섬석-양기석이 투휘석+엔스타타이트+석영+물($H_2O$)로 분해되는 반응이 거의 완결되는 것으로 해석된다. 이러한 가능성은 $926.9^{\circ}C$ 이상에서 1.93 wt%의 중량손실이 일어나는 열중량 분석결과와 잘 일치한다.