• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1991.10a
• /
• pp.20-23
• /
• 1991

In this study, 0.05Pb(Mn$\_$1/3/Nb$\_$2/3/)O$_3$+ 0.95Pb(Zr/Ti)O$_3$+x[wt%]Cr$_2$O$_3$piezoelectric ceramics were fabricated by Hot-press method, and its structural, dielectrical, piezoelectrical properties, temperature stability and aging characteristics were investigated. Among the MPB and tetragonal compositions, the specimens with 0.2, 0.3 and 0.4 [wt%] Cr$_2$O$_3$ additive amount had the poisson ratio more than 1/3. At tetragonal phase, the aging was small, and the temperature stability was improved by Cr addition. The specimen most suitable to the HF device substrate was the one with the composition of 47/53 (Zr/Ti) an 0.4 [wt%] Cr$_2$O$_3$addition.

• Journal of the Korean Ceramic Society
• /
• v.45 no.5
• /
• pp.256-262
• /
• 2008

$ZnAl_{1-x}\;Cr_xO_4$ solid solutions were synthesized as pink pigments with and without mineralizer. The pigments were examined to optimize color development conditions of temperature and $Cr_2O_3$ contents. The characteristics of synthesized pigments were analyzed by XRD, XPS, FT-IR and UV-vis spectrophotometer. While samples without mineralizer fired at $1300^{\circ}C$, showed $ZnAl_2O_4$ and $ZnCr_2O_4$ spinel in XRD analysis. While samples with mineralizer resulted in $ZnAl_2O_4$. As a results, the pigments show pink color and most effective pink color was obtained at X=0.15 and $1250^{\circ}C$ when mineralizer was used. The chromatic coordinates are $L^*$ 58.61 $a^*$ 24.48, and $b^*$ 9.60.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.725-731
• /
• 2002

Hypoglycemic effects of $H_2O$ fraction of Alisma canaliculatum (Ac) with chromium (Cr) in streptozotocin (STZ)-induced diabetic rats were investigated. Sprague-Dawley rats were divided into five groups: normal, diabetic-control, and three diabetic experimental groups. Diabetes mellitus was induced by injection of STZ (45 mg/kg) into tail vein, and $H_2O$ fraction of Ac and Cr were administrated orally to experimental rats for 14 days: Ac group (1,000 mg/kg), Cr-Ac group (Ac 1,000 mg/kg & Cr 100 mg/kg), and Cr group (100 mg/kg). Body weight losses were observed in all groups except the normal group, while the losses in experimental groups were significantly less than in diabetic-control group. The plasma glucose levels were significantly lower in Cr, Ac-Cr, and Ac groups compared to STZ-control group. Plasma cholesterol and TG levels of Ac-Cr group were significantly lower than those of diabetic-control group. Plasma HDL-cholesterol levels of three experimental groups were not significant compared to diabetic-control group, while the level of Cr group decreased more than diabetic-control group. The results suggest that there was no synergistic effect in the treatment of $H_2O$ fraction of Ac in combination with Cr, an indication that $H_2O$ fraction of Ac with Cr might possess some hypoglycemic and hypotriglyceridemic properties in STZ-induced diabetic rats.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.167-168
• /
• 2012

Films of CrN, $Cr_{40}Zr_9N$, and $Cr_{31}Zr_{16}N$ were deposited on a steel substrate by closed field unbalanced magnetron sputtering, and their oxidation behaviors at $700^{\circ}C$ and $800^{\circ}C$ for up to 60h in air were investigated. All the deposited films were composed of the CrN phase. Zirconium atoms in $Cr_{40}Zr_9N$ and $Cr_{31}Zr_{16}N$ films partially dissolved in the CrN phase. They advantageously refined the columnar structure, reduced the surface roughness, and increased the microhardness. The CrN film displayed relatively good oxidation resistance, owing to the formation of the highly protective $Cr_2O_3$ on its surface. The $Cr_{40}Zr_9N$ and $Cr_{31}Zr_{16}N$ films oxidized to $Cr_2O_3$ as the major phase and ${\alpha}-ZrO_2$ as the minor one. They oxidized primarily by the inward transport of oxygen. The addition of Zr could not increase the oxidation resistance of the CrN film, because the formed $ZrO_2$ that was intermixed in the $Cr_2O_3$-rich oxide layer was oxygen permeable, and developed the compressive stress in the oxide scale owing to the volume expansion during its formation.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.898-907
• /
• 1997

Fe-22Cr-5AI-X(X=Zr, Y)합금을 1143K, 고온 황화(P$s_{2}$=1.11x$10^{-7}$atm, P$O_{s}$ =3.11x$10^{-20atm}$) 및 황화/산화 (P$s_{2}$=8.31x$10^{-8}$atm, P$O_{s}$ =3.31x$10^{-18atm}$) 환경의 복합가스 분위기에서 1-30시간동안 노출하여 합금표면에 형성된 부식층을 관찰하여 SEM/EDS로 분석하였다. Fe-22Cr-5AI합금은 고온 부식환경에서 부식 생성물의 성장은 포물선법칙을 따르고 주요 성분은 결함이 많고 다공질인 철과 크롬의 황화물[(Fe, Cr)Sx]이므로 고온 내식성이 감소하였다. Zr을 1wt%첨가한 Fe-22Cr-5AI합금의 고온 부식거동은 Y을 1wt%첨가한 합금과 비슷한 거동을 나타내었다. 황화환경에서는 Cr의 선택 황화에 의한 크롬 황화물(CrS)이 생성되고 노출시간의 경과에 따라 (Fe, Cr)Sx나 (Cr, Fe)Sx 등의 황화물의 성장으로 고온 내식성이 감소하였다. 그러나 황화/산화환경에서는 초기에는 알루미늄산화물(A $I_{2}$ $O_{3}$)및 지르코늄산화물(Zr $O_{2}$)등이 생성되어 보호적이었으나 15시간이후 부터 (Fe, Cr)Sx나 (Cr, Fe)Sx 의 황화물의 성장으로 고온 내식성이 감소하였다.

• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.560-564
• /
• 1998

CoPtCr magnetic layer was fabricated on the Cr underlayer by RF magnetron sputtering and the protective $SiO_2$ layer was deposited at room temperature. As the thickness of Cr underlayer increased, the coercive force of magnetic layer increased, then saturated slightly further increasing Cr underlayer thickness. Maximum coercive force was 860 Oe. It is thought that in-plane arrangement of magnetic phase and magnetic decoupling between the magnetic crystallites could lead to the increase of the coercive force. Post-annealing raised the coercive force exceedingly. and maximum coercive force value was 1650 Oe which was acquired from the sample annealed at 55$0^{\circ}C$ for 1hr.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.5
• /
• pp.251-257
• /
• 2019

Fe-9Cr-2W steels were corroded at $600-800^{\circ}C$ for up to 100 hr in ($Na_2SO_4-K_2SO_4-Fe_2O_3$)-($CO_2-0.3%SO_2-6%O_2$) mixed gas. The poor condition samples formed thick oxide scales that consisted primarily of $Fe_2O_3$ as the major oxide and $Fe_3O_4$, FeO as the minor one through preferential oxidation of Fe. Fe-9Cr-2W steels corroded fast, forming thick and non-protective scale. The scale divided into the outer and inner layer, which consisted of the outer Fe-O layer and the inner (Fe,Cr)-O layer containing some (Fe,Cr)-S.

• The Korea Journal of Herbology
• /
• v.21 no.1
• /
• pp.101-107
• /
• 2006

Objectives : It is well known that hexavalent chromium has toxic effect on normal cells. Recently, toxic effect of hexavalent chromium is diminished by the some extracts derived from herbs or plants. But, the toxic or protective mechanism of hexavalent chromium is well unknown. This study was performed to examine the protective effect of poncirin against $Na_2Cr_2O_7$-induced cytotoxicity on NIH3T3 fibroblasts. Methods : The protective effect of the cytotoxicity induced by $Na_2Cr_2O_7$ was measured by the cell viability after NIH3T3 fibroblasts were cultured with or without $Na_2Cr_2O_7$ for 48 hours. Antitoxic effects of poncirin on the cytotoxicity induced by $Na_2Cr_2O_7$ were examined by colorimetric assays such as MTT or XTT assay. Results : $Na_2Cr_2O_7$ decreased cell viability by the decreased absorbance in MTT or XTT assay, but, the poncirin increased cell viability which was decreased by $Na_2Cr_2O_7$-induced cytotoxicity on NIH3T3 fibroblasts. Conclusion : These results suggest that $Na_2Cr_2O_7$ showed cytotoxicity effect on NIH3T3 fibroblasts by the decrease of cell viavility, and poncirin was effective in the protection of $Na_2Cr_2O_7$-induced cytotoxicity in these cultures.

• Korean Journal of Materials Research
• /
• v.16 no.9
• /
• pp.557-563
• /
• 2006

The electrolytic reduction of spent oxide fuel involves the liberation of oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is too corrosive for typical structural materials. So, it is essential to choose the optimum material for the process equipment handling molten salt. In this study, corrosion behavior of Inconel 713LC, MA 754, X-750 and 718 in the molten salt $LiCl-Li_2O$ under an oxidizing atmosphere was investigated at $650^{\circ}C$ for $72{\sim}216$ hours. Inconel 713LC alloy showed the highest corrosion resistance among the examined alloys. Corrosion products of Inconel 713LC were $Cr_2O_3,\;NiCr_2O_4$ and NiO, and those of Inconel MA 754 were $Cr_2O_3\;and\;Li_2Ni_8O_{10}$ while $Cr_2O_3,\;NiFe_2O_4\;and\;CrNbO_4$ were produced from Inconel 718. Also, corrosion products of Inconel X-750 were found to be $Cr_2O_3,\;NiFe_2O_4\;and\;(Cr,Nb,Ti)O_2$. Inconel 713LC showed local corrosion behavior and Inconel MA 754, 718, X-750 showed uniform corrosion behavior.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.58-66
• /
• 1999

The catalytic oxidation of vinyl chloride was investigated over $CrO_x$ impregnated on $Al_2O_3$ at temperature between 200 and $400^{\circ}C$. The major carbonaceous products were CO and $CO_2$, and the selectivity of $CO_2$ was gradually increased with increasing reaction temperature, while that of CO was dropped consequently. This suggests that CO is the first product which is further oxidized to $CO_2$ in the oxidation of vinyl chloride over $CrO_x/Al_2O_3$. The addition of HCl in the feed didn't affect the conversion of vinyl chloride, but the selectivity of $CO_2$ decreased by adding HCl. It implies that HCl inhibits, the complete oxidation of vinyl chloride to $CO_2$. When oxidizing vinyl chloride in dry air, significant amounts of $Cl_2$ were observed, while no $Cl_2$ was detected in the humid condition. The activities of several catalysts including various precious metals and other transition metal oxides were measured, it was found that the catalytic activity of 12% $CrO_x/Al_2O_3$ was higher than other catalysts except 1% $Pt/Al_2O_3$. The reaction rate of 12% $CrO_x/Al_2O_3$ was 1.2 times lower than that of 1% Pt/alumina, but it was 3 to 8 times more active than other catalysts for vinyl chloride oxidation at $275^{\circ}C$.