• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.160-161
• /
• 2008

$SnO_2$는 n형 반도체로써 3.6 eV의 큰 밴드갭을 가지는 물질로 CO와 NOx 가스에 좋은 감도를 나타내는 것으로 보고되고 있다. 문헌에 따른 일반적인 $SnO_2$ 가스센서는 후막이나 벌크형태로 제작되었다. 근래에는 가스감응체가 $SnO_2$ 나노선 형태인 가스센서가 활발한 연구 중에 있다. 본 논문에서는 기판 위에 서로 분리된 전극 패턴에 Au를 촉매로 하여 네트워크 구조로 된 $SnO_2$ 나노선이 합성되었다. 제작된 가스센서에 Pd 도핑에 따른 영향을 알아보기 위하여 1.8 mM의 Pd 용액 ($PdCl_2{\cdot}xH_2O$ 3 mg + $H_2O$ 10 ml)을 이용하여 센서에 도핑하였다. 측정 시스템에서 $NO_2$ 가스에 대한 센서의 특성을 분석한 결과 도핑하지 않은 $SnO_2$ 센서보다 20%정도의 감도가 개선되었다.

• Korean Journal of Materials Research
• /
• v.19 no.8
• /
• pp.412-416
• /
• 2009

In this study, 3 mol% yttria-tetragonal zirconia polycrystal (3Y-TZP) nanoparticles were synthesized by the glycothermal method under various reaction temperatures and times. The co-precipitated precursor of 3Y-TZP was prepared by adding $NH_4OH$ to starting solutions, and then the mixtures were placed in an autoclave reactor. Tetragonal yttria-doped zirconia nanoparticles were afforded through a glycothermal reaction at a temperature as low as $220^{\circ}C$, using co-precipitated gels of $ZrCl_4$ and $YCl_3{\cdot}6H_2O$ as precursors and 1,4-butanediol as the solvent. The synthesized 3Y-TZP particles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Raman spectroscopy. The 3Y-TZP particles have a stable tetragonal phase only at glycothermal temperatures above $200^{\circ}C$. To investigate phase transition, the 3Y-TZP particles were heat treated from 400 to $1400^{\circ}C$ for 2 h. Raman analysis indicated that, after heat treatment, the tetragonal phase of the 3Y-TZP particles remained stable. The results of this study, therefore, suggest that 3Y-TZP powders can be prepared by the glycothermal method.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1518-1520
• /
• 2000

Amorphous $MnO_{2}{\cdot}nH_{2}O$ in 1M KOH aqueous electrolyte proves to be an excellent electrode for a faradic electrochemical capacitor cycled between -0.5 and +1.0 versus Ag/AgCl. The effect of thermal treatment on the crystalinity, particle structure, and corresponding electrochemical properties of the resulting xerogel remained amorphous as Mn(OH)2 up to 160$^{\circ}C$. With an increase in the temperature above 200$^{\circ}C$, both the surface area and pore volume decreased sharply, because the amorphous Mn(OH)2 decomposed to form MnO that was subsequently oxidized to form crystalline Mn3O4. In addition, the changes in the crystallinity, and particle structure all had significant but coupled effects on the electrochemical properties of the xerogels. A maximum capacitance of 160.6F/g was obtained for an electrode prepared with the MnOx Xerogel calcined at 150$^{\circ}C$, which was consistent with the maxima exhibited in both the surface area and pore volume. This capacitance was attributed solely to a surface redox mechanism.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.2
• /
• pp.129-134
• /
• 1988

Enzymatical properties of Streptomyces sp. S-45 producing chitinase and ${\beta}$-1.3-glucanase isolated from soil were investigated. Chitinase activity was 3.01(U/ml) and ${\beta}$-1.3-glucanase activity was 2.49(U/ml). The optimum medium for mycolytic enzyme production of strain was composed of 0.7% colloidal chitin, 0.3% glucose, 0.5% asparagine, 0.2% peptone, 0.01% NaCl, 0.01% $K_2HPO_4$ and 0.01% $MgSO_4{\cdot}7H_2O$ in intial pH 7.0. The optimal condition for mycolytic enzyme activities were: pH 6.5-7.0, $45-50^{\circ}C$. Enzyme activities were activated by metal ion as $10^{-2}M\;Co^{{+}{+}}$, $Cu^{{+}{+}}$, $Mn^{{+}{+}}$, $Al^{{+}{+}{+}}$ and $10^{-3}M\;Sn^{{+}{+}}$ but $Ag^{{+}{+}}$, $Hg^{{+}{+}}$ inhibited.

• Korean Journal of Food Science and Technology
• /
• v.5 no.4
• /
• pp.215-223
• /
• 1973

A potent citric acid producing strain was selected by an extensive screening test of the yeasts isolated from the various sources. These experiments were conducted to identify the selected strain and investigate the cultural conditions for citric acid production. The results obtained were as fellows: 1. The selected strain of yeast was identified to Hansenula anomala var. anomala by a taxnoomic study of Lodder. 2. The optimum conditions for citric acid production in the basal medium containing 10% glucose were: temperature $30^{\circ}C$, the concentration of $CaCO_3$ 3% and the velocity of oscillation 110 oscills/min. 3. As a nitrogen source ol the basal medium $NH_4Cl(0.1%)$ was the most effective for citric acid production. Organic nitrogen sources such as peptone were adequate for growth of the strain but not for citric acid production. 4. The most effective concentration of glucose was 10% in yield ratio of citric acid from sugar. 5. The addition of defatted rape seed, defatted perilla or defatted rice bran to the medium was effective for citric acid production. When 5% extract solution of defatted rape seed was added, the citric acid production was increased as much as 40% as compared with the case of adding yeast extract(0.2%). 6. The most effective concentration of $KH_2PO_4$ and $MgSO_4{\cdot}7H_2O$ in the medium(for citric acid Production) was 0.05% and 0.025% respectively. 7. Under the optimum cultural conditions, the growth of the strain was continued up to 5 days and the increase of citric acid production was continued up to 6 days, showing the yield ratio of 46% to glucose.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.464-470
• /
• 2006

Diblock copolymers consisting of methoxy Poly (ethylene glycol) (MPEG) and poly (${\epsilon}-ca$ prolactone) (PCL), poly(${\delta}-valerolactone$) (PVL), poly(L-lactide) (PLLA), or poly(L-lactide-co-glycolide) (PLGA) were prepared to compare the characterization of diblock copolymers as a drug carrier. MPEG-PCL, MPEG-PVL, MPEG-PLLA, and MPEG-PLGA diblock copolymers were synthesized by the ring-opening polymerization of ${\epsilon}$-caprolactone or ${\delta}$-valerolactone in the presence of $HCl{\cdot}Et_2O$ as a monomer activator at room temperature and by the ring-opening polymerization of L-lactide or a mixture of L-lactide and glycolide in the presence of stannous octoate at $130^{\circ}C$, respectively. The synthesized diblock copolymers were characterized with $^1H-NMR$, GPC, DSC, and XRD. The micellar characterization of MPEG-polyester diblock copolymers in an aqueous phase was carried out by using NMR, dynamic light scattering, AFM, and fluorescence techniques. Most micelles exhibited a spherical shape in AFM. Thus, ore confirmed that the micelles formed with MPEG-polyester diblock copolymers have possibility as a potential hydrophobic drug delivery vehicle because a hydrophobic drug could be preferentially distributed in the micelle core.

• Journal of Life Science
• /
• v.18 no.10
• /
• pp.1377-1383
• /
• 2008

A bacterium producing non- or partially digestible dextran was isolated from kimchi broth by enrichment culture technique. The bacterium was identified tentatively as Leuconostoc sp. strain SKY. We established the response surface methodology (Box-Behnken design) to optimize the principle parameters such as culture pH, temperature, and yeast extract concentration for maximizing production of dextran. The ranges of parameters were determined based on prior screening works done at our laboratory and accordingly chosen as 5.5, 6.5, and 7.5 for pH, 25, 30, and $35^{\circ}C$ for temperature, and 1, 5, and 9 g/l yeast extract. Initial concentration of sucrose was 100 g/l. The mineral medium consisted of 3.0 g $KH_2PO_4$, 0.01 g $FeSO_4{\cdot}H_2O$, 0.01 g $MnSO_4{\cdot}4H_2O$, 0.2 g $MgSO_4{\cdot}7H_2O$, 0.01 g NaCl, and 0.05 g $CaCO_3$ per 1 liter deionized water. The optimum values of pH and temperature, and yeast extract concentration were obtained at pH (around 7.0), temperature (27 to $28^{\circ}C$), and yeast extract (6 to 7 g/l). The best dextran yield was 60% (dextran/g sucrose). The best dextran productivity was 0.8 g/h-l.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.743-760
• /
• 2014

This study aimed to isolate and identify freshwater algae from the organic agricultural ecosystems and investigate its biological characteristics to study the possibility of utilizing a biomass freshwater algae in organic farming. In the survey area, average water temperature was $12.4{\sim}28.2^{\circ}C$ and the pH ranges were from 6.1 to 8.5. The solid culture method is more suitable than liquid culture method for isolation of freshwater algae with lower contamination level and higher isolation frequency. A total of 115 strains were isolated from six freshwater algae habitats in nine regions in Korea. BGMM (BG11 Modified Medium) amended with NaNO3 and $KNO_3$ as a nitrogen, and $Na_2CO_3$ as carbon source was designed to isolate and culture freshwater algae. Absorbance of freshwater algae culture has increased dramatically to four days and decreased after eight days after inoculation. CHK008 of the seven isolates showed the highest absorbance in seven days after culturing in BGMM. The optimal pH of BGMM for culturing freshwater algae was pH 6-7. As light intensity increased, growth of freshwater algae increased. Among the five kinds of carbon sources, glucose and galactose promoted good growth of freshwater algae in BGMM. The colony color of purified 16 green algae isolates showed a separation of green, dark and light green, and of them, eleven algae strains showed a strong fluorescent light under fluorescence microscopy. Cell size of the green algae showed a wide range of variation depending on the species. General morphology of the green algae strains was spherical. Chlamydomonas sp. was elliptical, and Chlorella sorokiniana was ellipsoidal and cylindrical. All strains of the green algae except for Chlamydomonas sp. did not have flagella. One isolate of Chlamydomonas sp. and five isolates of C. sorokiniana secreted mucus. Sixteen isolates of 16 green algae were identified as two family and six species, Chlorella vulgalis, C. sorokiniana, C. pyrenoidosa, C. kessleri, C. emersonii, and Chlamydomonas sp. based on their morphological characteristics.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.10
• /
• pp.1319-1326
• /
• 2014

Rapamycin, produced by the soil bacterium Streptomyces hygroscopicus, has the ability to suppress the immune system and is used as an antifungal, anti-inflammatory, antitumor, and immunosuppressive agent. In an attempt to increase the productivity of rapamycin, mutagenesis of wild-type Streptomyces hygroscopicus was performed using ultraviolet radiation, and the medium composition was optimized using glycerol (which is one of the cheapest starting substrates) by applying Plackett-Burman design and response surface methodology. Plackett-Burman design was used to analyze 14 medium constituents: M100 (maltodextrin), glycerol, soybean meal, soytone, yeast extract, $(NH_4)_2SO_4$, $\small{L}$-lysine, $KH_2PO_4$, $K_2HPO_4$, NaCl, $FeSO_4{cdot}7H_2O$, $CaCO_3$, 2-(N-morpholino) ethanesulfonic acid, and the initial pH level. Glycerol, soytone, yeast extract, and $CaCO_3$ were analyzed to evaluate their effect on rapamycin production. The individual and interaction effects of the four selected variables were determined by Box-Behnken design, suggesting $CaCO_3$, soytone, and yeast extract have negative effects, but glycerol was a positive factor to determine rapamycin productivity. Medium optimization using statistical design resulted in a 45% ($220.7{\pm}5.7mg/l$) increase in rapamycin production for the Streptomyces hygroscopicus mutant, compared with the unoptimized production medium ($151.9{\pm}22.6mg/l$), and nearly 588% compared with wild-type Streptomyces hygroscopicus ($37.5{\pm}2.8mg/l$). The change in pH showed that $CaCO_3$ is a critical and negative factor for rapamycin production.

• Journal of Life Science
• /
• v.23 no.6
• /
• pp.757-769
• /
• 2013

A microorganism producing carboxymethylcellulase (CMCase) was isolated from seawater, identified as Bacillus velezensis by analyses of 16S rDNA and partial sequences of the gyrA, and designated as B. velezensis A-68. The optimal conditions for production of CMCase by B. velezensis A-68 were established using response surface methodology (RSM). The optimal concentrations of rice hulls and yeast extract, and initial pH of the medium for cell growth were 60.2 g/l, 7.38 g/l, and 7.18, respectively, whereas those for production of CMCase were 50.0 g/l, 5.00 g/l, and 7.30. The analysis of variance (ANOVA) implied that the most significant factor for cell growth as well as production of CMCase was yeast extract. The optimal concentrations of $K_2HPO_4$, NaCl, $MgSO_4{\cdot}7H_2O$, and $(NH_4)_2SO_4$ in the medium for cell growth were 7.50, 1.00, 0.10, and 0.80 g/l, respectively, which were the same as those for production of CMCase. The optimal temperatures for cell growth and production of CMCase were 30 and $35^{\circ}C$, respectively. The maximal production of CMCase under optimized conditions was 83.8 U/ml, which was 3.3 times higher than that before optimization. In this study, rice hulls, agro-byproduct, were developed as a substrate for production of CMCase and time for production of CMCase was reduced to 3 days using a newly isolated marine bacterium.