• 한국재료학회지
• /
• 제27권5호
• /
• pp.289-293
• /
• 2017

$Y_2Ti_2O_7$ nanoparticles (0.3 mol%) have been successfully synthesized by the co-precipitation process. The samples, adjusted to pH7 with ammonia solution as catalyst and calcined at $700{\sim}900^{\circ}C$, exhibit very fine particles with close to spherical shape and average size of 10-30 nm. It was possible to control the size of the synthesized $Y_2Ti_2O_7$ particles by manipulating the conditions. The $Y_2Ti_2O_7$ nanoparticles were coated on a glass substrate by a dipping coating process with inorganic binder. The $Y_2Ti_2O_7$ solution coated on the glass substrate had excellent adhesion of 5B; pencil hardness test results indicated an excellent hardness of 6H. The thickness of the thick film was about $30{\mu}m$. Decomposition of MB on the $Y_2Ti_2O_7$ thin film shows that the photocatalytic properties were excellent.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2013-2015
• /
• 2005

In this paper, Effect of $BaSrTiO_3/Li_2CO_3$ on low temperature sintering and dielectric property of thick films has been investigated for variable capacitor on high frequency. The thick films were fabricated by the tape casting and then the structural and dielectric properties as a function of an addition composition ratio and sintering temperature were studied. For the thick film sintered at $1050^{\circ}C$, it was densified to 96% of $BaSrTiO_3$ theoretical density by the addition of 10 $wt{\cdot}%$ $BaSrTiO_3/Li_2CO_3$. Dielectric constant increased and Curie temperature lowered with the increased of $BaSrTiO_3/Li_2CO_3$ content, which probably can be explained by the substitution of $Ba^{3+},Li^{1+}$ on $RaTiO_3$ lattice. The tunability and dielectric loss of the $BaSrTiO_3/Li_2CO_3$ thick film, sintered at $1350^{\circ}C$, were about 26% and 0.234 at $10{\sim}15MHz$, respectively.

• 한국환경과학회지
• /
• 제15권7호
• /
• pp.677-688
• /
• 2006

Currently, the application of $TiO_2$ photocatalyst has been focused on purification and treatment of wastewater. However, the use of conventional $TiO_2$ slurry photocatalyst results in disadvantage of stirring during the reaction and of separation after the reaction. And the usage of artificial UV lamp has made the cost of photocatalyst treatment system high. Consequently, we studied that solar light/$TiO_2$ film system was designed and developed in order to examine disinfection characteristics of sewage wastewater treatment. The optimum conditions for disinfection such as solar light intensity, characteristic of sewage wastewater, amounts of $TiO_2$ and comparison of solar ligth/$TiO_2$ systems with UV light/$TiO_2$ system was examined. The results are as follows: (1) photocatalytic disinfection process with solar light in the presence of $TiO_2$ film more effectively killed total coliform (TC) than solar light or $TiO_2$ film absorption only. (2) The survival ratio of TC and residual ratio of organic material (BOD, CODcr) decreased with remain resistant material. (3) The survival ratio of TC and residual ratio of organic material (BOD, CODcr) decreased with the increase of amounts of $TiO_2$. (4) TC survival ratio decreased linearly with increasing UV light intensity. (5) The disinfection effect of solar light/$TiO_2$ slurry system decreased more than UV light/$TiO_2$ film systems. (6) The disinfection reaction followed first-order kinetics. We suggest that solar light instead of using artificial UV light was conducted to investigate the applicability of alternative energy source in the disinfection of TC and the degradation of organic material.

• 한국광학회지
• /
• 제17권1호
• /
• pp.104-109
• /
• 2006

동시 스퍼터링법으로 $TiO_2$ 박막과 구리를 도핑한 Cu/$TiO_2$ 박막을 제작하고, 금속의 도핑과 열처리 온도에 따른 구조적, 광학적, 광분해 특성을 조사하였다. XRD 측정 결과 구리 도핑의 경우에 입자의 결정 크기가 증가하였으며, SEM 결과 입자들의 크기가 균일하고 입자들의 뭉침이 더 작은 것을 확인 할 수 있었다. $900^{\circ}C$에서 열처리한 박막의 흡수단은 아나타제에서 루타일로의 상전이에 의해 밴드갭의 변화로 장파장 영역으로 이동하였고, 또한 입자 크기 증가에 따라 투과율이 급격히 감소하였다. Cu/$TiO_2$ 박막들은 순수$TiO_2$ 박막보다 광분해 특성이 더 우수하였다.

• 멤브레인
• /
• 제20권1호
• /
• pp.1-7
• /
• 2010

원자전달 라디칼 중합을 이용하여 poly(styrene sulfonic acid) 47 wt%를 가진 poly(vinylidene fluoride-co-chlorotrifluoroethylene)-g-poly(styrene sulfonic acid) (P(VDF-co-CTFE)-g-PSSA) 가지형 공중합체를 합성하였다. 티타늄 아이소프로폭사이드(TTIP)와 가지형 공중합체를 졸-겔 공정을 통하여 $TiO_2$/가지형 공중합체 복합막을 제조하였다. TTIP는 가지형 공중합체의 친수성을 가진 PSSA 영역에만 선택적으로 결합하였으며 그곳에 $TiO_2$ 나노 입자가 형성되어 성장하였다. 이와 같은 결과를 적외선과 자외선 분광학으로 확인할 수 있다. 함수량과 이온 교환 능력 (IEC)는 TTIP의 함량에 따라 감소하였고 이것은 막이 가진 술폰산의 수가 감소하기 때문이었다. TTIP가 5 중량%일 때, 막의 기계적 강도는 증가하고 수소이온 전도도도 유지되었다.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.484-492
• /
• 1998

단결정 Si기판위의 Co/Ti 이중층으로부터 형성된 Co 실리사이드의 에피텍셜 성장기구에 대하여 조사하였다. 실리사이드화 과정중 Ti원자들이 저온상의 CoSi결정구조의 tetrahedral site들을 미리 점유해 있음으로 인하여, $CoSi_{2}$ 결정구조로 바뀌는 과정에서 Si원자들이 나중에 제위치를 차지하기 어렵게 되는 효과 때문이다. 그리고 Ti중간층은 반응의 초기단계에 Co-Ti-O 삼원계 화합물을 형성하는데, 이 화합물은 실리사이드화 과정중 반응 제어층으로 작용하여 에피텍셜 실리사이드 형성에 중요한 역할을 한다. 최종 열처리 층구조 Ti oxide/Co-Ti-Si/epi/$Cosi_{2}$(100) Si 이었다.

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.228-234
• /
• 2003

In the present study, the focus is on the synthesis of titanium carbide/cobalt composite powder by the spray thermal conversion process using metallic salt solution as the raw materials. Two types of oxide powders of Ti-Co-O system were prepared by the spray drying of two types of metallic salt solutions : titanium chloride-cobalt nitrate and $TiO_2$ powder-cobalt nitrate solutions. These oxide powders were mixed with carbon black, and then these mixtures were carbothermal reduced under a flowing argon atmosphere. The changes in the phase structure and thermal gravity of the mixtures during carbothermal reduction were analysed using XRD and TG-DTA. In the case of using the titanium chloride-cobalt nitrate solution, it could not be obtained TiC/Co composite powder due to contamination of the impurities during the spray drying of the solution. However, in tile case of using the $TiO_2$ powder-cobalt nitrate scullion, TiC-15 wt. %Co composite powder could be synthesized by the spray thermal conversion process. The synthesized TiC-15 wt. %Co composite powder at 120$0^{\circ}C$ for 2 hours has average particle size of 150 nm.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.145-150
• /
• 1996

약 30$0^{\circ}C$, 160 kg/$cm^2$의 원자로냉각재계통에서 사용이 가능한 $^{60}$Co 제거용 고온흡착제를 얻기 위하여, ZrO$_2$를 zirconyl nitrate를 출발물질로 하여 졸-겔법으로, aluminum isopropoxide를 출발 물질로 하여 A1$_2$O$_3$를, aluminum isopropoxide와 titanium tetraisopropoxide를 출발물질로하여 TiO$_2$-A1$_2$O$_3$를, aluminum isopropoxide와 zirconium propoxide를 출발물질로 하여 ZrO$_2$-A1$_2$O$_3$를 금속알콕사이드 가수분해법으로 제조하였다. 제조한 흡착제는 600~140$0^{\circ}C$의 온도로 하소 하였으며, 결정전이, 열적특성, 비표면적 등의 물성변화를 알아보기 위하여 X선회절, 적외선분광분석, 열분석, 전자현미경 관찰, BET 비표면적 등을 측정하였다. 또한, 고온수에서 이들 흡착제의 Co$^{2＋}$ 흡착특성을 autoclave를 이용한 회분식 흡착실험으로 알아보았다. 이들 흡착제 제조시 하소온도에 따른 Co$^{2＋}$ 흡착량, $Al_2$O$_3$ 흡착제 제조시 pH 변화에 따른 Co$^{2＋}$ 흡착량과 TiO$_2$-A1$_2$O$_3$ 흡착제 제조시 TiO$_2$ 함량에 따른 Co$^{2＋}$ 흡착량과 25$0^{\circ}C$의 고온에서 ZrO$_2$와 $Al_2$O$_3$의 표면에 생성된 코발트 화합물을 XPS와 EPMA로 부터 확인하였다.

• 한국표면공학회지
• /
• 제37권6호
• /
• pp.360-365
• /
• 2004

Ti$_3$SiC$_2$ material was synthesized via the powder metallurgical route, and oxidation tested between 900 and $1200^{\circ}C$ in air for up to 100 hr. The oxidation of $Ti_3$$SiC_2$ material resulted in the formation of $TiO_2$and $SiO_2$, accompanying the evolution of CO or $CO_2$ gases from the initial stage of oxidation. The oxidation resistance of $Ti_3$$SiC_2$ mainly owes the protectiveness of highly stoichiometric $SiO_2$. During the initial stage of oxidation, the dominant reaction was the inward transport of oxygen into the matrix. As the oxidation progressed, an outer $TiO_2$ layer and an inner ( $TiO_2$ + $SiO_2$) mixed layer formed. Between these layers and inside the oxide scale, numerous fine voids formed. Numerous, fine oxide grains formed at $900^{\circ}C$ developed into the outer coarse $TiO_2$ grains and an inner fine ($TiO_2$ + $SiO_2$) mixed grains at the higher temperatures. The oxidation resistance of$ Ti_3$SiC$_2$ progressively deteriorated as the oxidation temperature increased, forming thick scales above $1000^{\circ}C$. The outer coarse $TiO_2$ grains formed above $1100^{\circ}C$ grew rapidly mainly along (211).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.84-84
• /
• 2011