• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.445-449
• /
• 1999

Hydrophilic polyphosphazenes were synthesized from hydrophobic polyphosphazenes by adding methoxyethylenoxy side chains and cast by dip-coating method into membranes supported on porous polypropylene mesh filter sheet for metal separation testing. A solution of $Cr^{3+},\;Co^{2+},\;Mn^{2+}$ nitrates was used in diffusion experiments which were conducted from $25^{\circ}C$ to $60^{\circ}C$. lt was found that the ion transport properties were increased as the repeating number of ethylenoxy side chain increased. Membrane from trifluoroethoxy methoxyethoxyethoxyethoxy co-substituted polyphosphazenes was found to separate $Cr^{3+}$ ion from $Mn^{2-}$ and $Co^{2+}$ ions with separation factor of 4.5 at $60^{\circ}C$.

• Parasites, Hosts and Diseases
• /
• v.50 no.1
• /
• pp.83-87
• /
• 2012

To determine the effects of kimchi extracts at different temperatures on larval development, $Ascaris$ $suum$ eggs were mixed with soluble part of 7 different brands of commercially available kimchi and preserved at either $5^{\circ}C$ or $25^{\circ}C$ for up to 60 days. $A.$ $suum$ eggs incubated at $25^{\circ}C$ showed marked differences in larval development between kimchi extract and control group. While all eggs in the control group completed embryonation by day 21, only 30% of the eggs in the kimchi extract group became embryonated by day 36 and about 25% never became larvated even at day 60. At $5^{\circ}C$, however, none of the eggs showed larval development regardless of the incubation period or type of mixture group. To determine the survival rate of $A.$ $suum$ eggs that showed no embryonation after being preserved at $5^{\circ}C$, eggs preserved in kimchi extracts for 14, 28, and 60 at $5^{\circ}C$ were re-incubated at $25^{\circ}C$ for 3 weeks in distilled water. While all eggs in the control group became larvated, eggs in the kimchi extract group showed differences in their embryonation rates by the incubation period; 87.4 % and 41.7% of the eggs became embryonated after being refrigerated for 14 days and 28 days, respectively. When refrigerated for 60 days, however, no eggs mixed in kimchi extract showed larval development. Our results indicate that embryogenesis of $A.$ $suum$ eggs in kimchi extract was affected by duration of refrigeration, and that all eggs stopped larval development completely in kimchi kept at $5^{\circ}C$ for up to 60 days.

• Clean Technology
• /
• v.8 no.4
• /
• pp.199-203
• /
• 2002

To investigate the optimal conditions for biodegradation of toluene by Pseudomonas fluorescens KCTC 1767 in a batch soil-bioreactor, the effects of rpm change from 60 to 180, and temperature change from $15^{\circ}C$ to $30^{\circ}C$ in a batch culture and the flow rate change from 55 mL/min to 85 mL/Min in soil-bioreactor on the biodegradation of toluene were studied. In a batch culture the optimal operating conditons were 60 rpm, and $30^{\circ}C$ at initial pH 7, In a soil-bioreactor the optimal flow rate was 55 mL/min in the flow rate of circulation. The lower flow rate of circulation may help to biodegrade toluene adsorped in soil and dissolved in underground water.

• Journal of Korean Society of Forest Science
• /
• v.104 no.1
• /
• pp.60-66
• /
• 2015

This study was conducted to determine the effects of seed storage method ($-20^{\circ}C$, $2^{\circ}C$ dry, $2^{\circ}C$ wet 30 days, $2^{\circ}C$ wet 60 days, stratification and room temperature) and shading treatment(control, 50%, 80%) on seed germination, seedling growth of endangered species, Iris dichotoma and Iris setosa. As a result, seed germination rate of I. dichotoma was the highest at 75% when seed were stored at $2^{\circ}C$ wet 60 days and then sown under non-shading condition. The seed of I. dichotoma belong to intermediate seed. Seed germination rate of I. setosa was the highest at 95% when seed were stored at $2^{\circ}C$ wet 60 days and then sown under 80% shading condition. The seed of I. setosa belong to recalcitrant seed. Seedlings of I. dichotoma and I. setosa showed not only the best seedling quality but also seedling vigor index in seed stored at $2^{\circ}C$ wet 60 days under non-shading condition, with the growth characteristics of plant height (6.4, 7.2 cm), number of leaves (3, 4), leaf width (4.6, 3.2 mm), leaf length (5.7, 6.8 cm), fresh weight (aerial/root part; 144/260, 97/153 mg), dry weight (aerial/root; 31/20, 17/17 mg) and seedling vigor index and modified seedling vigor index (13,895/9,479, 13,256/8,668). In this research, I. dichotoma and I. setosa seed were stored at $2^{\circ}C$ wet 60 days, and then sown in non-shading condition, seed germination rate was more than 75%, 90%, respectively, and production of superior quality seedlings.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.528-537
• /
• 2008

60 nm and 20 nm thick hydrogenated amorphous silicon(a-Si:H) layers were deposited on 200 nm $SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by an e-beam evaporator. Finally, 30 nm-Ni/(60 nm and 20 nm) a-Si:H/200 nm-$SiO_2$/single-Si structures were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 40 sec. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy(FE-SEM), transmission electron microscopy(TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide from the 60 nm a-Si:H substrate showed low sheet resistance from $400^{\circ}C$ which is compatible for low temperature processing. The nickel silicide from 20 nm a-Si:H substrate showed low resistance from $300^{\circ}C$. Through HRXRD analysis, the phase transformation occurred with silicidation temperature without a-Si:H layer thickness dependence. With the result of FE-SEM and TEM, the nickel silicides from 60 nm a-Si:H substrate showed the microstructure of 60 nm-thick silicide layers with the residual silicon regime, while the ones from 20 nm a-Si:H formed 20 nm-thick uniform silicide layers. In case of SPM, the RMS value of nickel silicide layers increased as the silicidation temperature increased. Especially, the nickel silicide from 20 nm a-Si:H substrate showed the lowest RMS value of 0.75 at $300^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.582-592
• /
• 1995

To measure rheological properties of the starch dough, an Extrusion Capillary Viscometer(ECV) cell was self-made and attached to Instron machine(Model 1140). Apparent viscosities of corn and waxy corn starch doughs were measured and their gelatinization degrees were determined by enzymatic analysis. When corn and waxy corn starch doughs with $36{\sim}52%$ moisture content were heated at $60{\sim}100^{\circ}C$, come-up time of the cold point of doughs decreased from 220 sec to 140 sec with increased in the moisture content. In the measurement range of $36{\sim}52%$ moisture content and $60{\sim}100^{\circ}C$ heating temperature, both corn and waxy corn starch doughs showed pseudoplastic flow behaviors. At the same shear rate, both shear stress and viscosity of starch dough decreased as the moisture content increased. At the moisture content above 44%, the shear stress and viscosity of starch dough decreased as the heating temperature increased from $60^{\circ}C\;to\;70^{\circ}C$, but increased as the heating temperature increased from $80^{\circ}C\;to\;100^{\circ}C$. When the moisture content increased and heating temperature, the gelatinization degree of starch dough increased from about 10% to about 62%. The gelatinization degree of waxy corn starch dough was $15{\sim}20%$ higher than that of corn starch dough under the same gelatinization conditions. The effects of moisture content on the viscosity of starch dough were examined by Arrhenius equation. As the moisture content increased, viscosity of starch dough decreased. But the effect of moisture content was greater in the range of $80{\sim}100^{\circ}C$ than in the range of $60{\sim}70^{\circ}C$ heating temperature.

• Korean Journal of Food Science and Technology
• /
• v.22 no.5
• /
• pp.539-542
• /
• 1990

The effects of immersion temperature $(20,\;40\;and\;60^{\circ}C)$ and immersion times (6. 12 and 18 min) in a distilled water prior to air dehydration upon the browning reaction and pyruvic acid content of air dried onions to a 4.071 moisture content (wet basis) were analyzed by a response surface methodology (RSM). Those values were also predicted by using a second degree polynomial regression model. Immersion temperature had more influence to browning reaction and pyruvic acid content than immersion time in these experimental ranges. The processing conditions to minimize the browning reaction of dried onions at $50^{\circ}C$ of air temperature (O.D.=0.071) were $60^{\circ}C$ of immersion temperature and 18 min of immersion time compared to control (O.D.=0.168) of air dehydration at $50^{\circ}C$ Pyruvic acid contents of dried onions at $50^{\circ}C$ of air temperature were maximized $(39.85{\mu}mole/g\;onion\;solid)$ at $60^{\circ}C$ of immersion temperature and 12 min of immersion time compared to control $(24.08{\mu}mole/g\;onion\;solid)$ of air dehydration at $50^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1617-1622
• /
• 2016

This study was carried out to investigate antioxidant compounds (total polyphenol and total flavonoid) and antioxidant activities (DPPH radical scavenging activity, ABTS radical scavenging activity, FRAP activity, and reducing power] of the mycelium and fruit body of Sparassis crispa depending on extraction temperature ($60^{\circ}C$ and $95^{\circ}C$). For total polyphenols, total flavonoids, FRAP activity, and reducing power, the mycelium of S. crispa extracted at $95^{\circ}C$ showed the highest contents and activities. The mycelium of S. crispa extracted at $60^{\circ}C$ and fruit body of S. crispa extracted at $95^{\circ}C$ showed the highest DPPH radical scavenging activity and ABTS radical scavenging activity, respectively. This study suggests that the antioxidant activities of S. crispa extracted at $95^{\circ}C$ are better than those of S. crispa extracted at $60^{\circ}C$, and the mycelium contained more antioxidant compounds than the fruit body.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.565-569
• /
• 2002

This study was carried out to estimate the effects of preservatives (alcohol, adipic acid) and heat treatment $(40^{\circ}C,\;60^{\circ}C)$ for the prolongation of shelf-life on low-salt Kimchi. Low-salt Kimchi was prepared with salt replacements (NaCl 50%, KCl 36%, $MgSO_4$ 10%, $CaSO_4$ 3%, glutamic acid 0.2%). Chemical characteristics and microbiological parameters were monitored during fermentation at $20^{\circ}C$. When three kinds of preservative which were alcohol 2.0%, adipic acid 0.1% and their mixture were added to low-salt Kimchi, shelf-life of them were prolonged. To extend the shelf-life of low-salt Kimchi, when the heat treatment at $40^{\circ}C$ and $60^{\circ}C$ were tried, heat treatment at $60^{\circ}C$ was superior than at $40^{\circ}C$. In sensory evaluation of low-salt Kimchi, the control was showed the best quality in the overall acceptability. And low-salt Kimchi treated at $40^{\circ}C$ showed the most similar characteristics to the control Kimchi.

• Applied Biological Chemistry
• /
• v.37 no.5
• /
• pp.409-413
• /
• 1994

Barbaloin in the Aloe vera depending on the various extracting conditions was analyzed by HPLC. The contents of the barbaloin extracted by the solvents increased in the order of methanol>ethanol>water extraction. In setting extraction, the contents of barbaloin extracted with methanol and ethanol were increased from four hours at $60^{\circ}C$ and then decreased. The contents of barbaloin extracted with water were different depending on the temperature and time. Increasing the extracting time and temperature, the contents of barbaloin were decreased in water extract. It was estimated that the barbaloin might be stable in organic solvent, but decomposed with hydrolysis in water.