• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.229-234
• /
• 2017

In this study, we fabricated a TFT gas sensor with ZnO nanorods grown by hydrothermal synthesis. The suggested devices were compared with the conventional ZnO film-type TFTs in terms of the gas-response properties and the electrical transfer characteristics. The ZnO seed layer is formed by atomic-layer deposition (ALD), and the precursors for the nanorods are zinc nitrate hexahydrate ($Zn(NO_3)_2{\cdot}6H_2O$) and hexamethylenetetramine ($(CH_2)6N_4$). When 15 ppm of NO gas was supplied in a gas chamber at $150^{\circ}C$ to analyze the sensing capability of the suggested devices, the sensitivity (S) was 4.5, showing that the nanorod-type devices respond sensitively to the external environment. These results can be explained by X-ray photoelectron spectroscopy (XPS) analysis, which showed that the oxygen deficiency of ZnO nanorods is higher than that of ZnO film, and confirms that the ZnO nanorod-type TFTs are advantageous for the fabrication of high-performance gas sensors.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.369-375
• /
• 2004

In this study, liquid crystalline (LC) is formed using Gemini surfactant (GS) type and moisturizing effect in vivo is measured. $3.0\;wt\%$ of sodium dicocoyl ethylene diamine (PEG)-15 sulfate (SCD-PEG-15S) is used as GS and $4.0\;wt\%$ of hydrogenated dimer acid esters (HDAE) as booster. For stabilizers, $2.0\;wt\%$ of behenyl alcohol (BA) and $1.0\;wt\%$ of Iyso-lecithin (LyL) are utilized. It is stabilized in pH from 4.0 to 10.5 and the best condition is in pH 6.5. The value of viscosity is $8,000\pm500$ cP. The most excellent particles are formed within the range of 4.0 to 15.5 um. Formed LC is observed around LC particles using polarization microscope. It is also observed that lamellar gel network structure is formed around LC particles. Moisturizing effect is improved by $13.6\%$ (P<0.05) compared to control when measured 30 min later after coating samples. After 1 h, moisturizing effect is improved by 1$12.6\%$ (P<0.05) than control while showing $28.3\%$ (P<0.05) of improvement after 4 h. These results may be caused from that manufactured LC forms lamellar structure so that it has better water-holding ability and absorbance of oil increases. This formula could be utilized by delivery system (DS) on skin so that this technology can be applied for manufactuing pharmaceuticals and cosmetics.

• Korean Journal of Poultry Science
• /
• v.20 no.1
• /
• pp.1-9
• /
• 1993

This study carried out to build up new synthetic egg production lines which had sex-linked gene for feather color sexing and also superior combining ability for producing the best commercial chicks. The closed flock breeding method was utilized to improve the general performances in the first experiment and combining ability for heterosis was tested for new synthetic line in the second experimental year. In order to test for the egg production ability in cross breeds synthetic lines, the crossing of B$\times$4 B$\times$C, two imported strains and two domestic strains as controls were compared for the general performances. There was on difference in mortality, body weight to 56 weeks of age. Sexual maturity was delayed about 10 days by comparing with other reports, except 153 days of the Manina White, but no difference among mating systems in this experiment. The hen housed egg production in B$\times$A, B$\times$C was 186.3, 191.3 respectively and it was better than the other controls, except ISA imported lines. The hen-day egg production of B$\times$A, B$\times$C was better than other controls, with 75.7%, 76.8% respectively. In the average egg weight, the B$\times$C cross breed was highest with 64.5g. As the sex of hatching chicks was identified by difference of feather color, the genetic composition of synthetic lines must be homogenized. The feather color of female chicks was brown and that of male was silver (99%), In conclusion, the egg production ability of B$\times$A, B$\times$C cross breeds was superior to the imported and domestic lines. Therefore, it suggest that the synthetic lines with sex-linked gene might be utilized for improving egg production performances.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.1
• /
• pp.60-71
• /
• 1992

To investigate the delignification behaviour in solvolysis pulping process, Populus alba ${\times}$ glandulosa H. and Pinus Kuraiensis S. et Z. were cooked with p-cresol and vater solvent(2:8, 5:5, 8:2 v/v) at $175^{\circ}C$ for 9 cooking time levels(20, 40, 60, 80, 100, 120, 140, 160, 180, min). Pulp yield, residual lignin content, de lignification rate, decarborhydration rate were determined. Delignification behaviours were analyzed by TEM. 1. The p-cresol-water solvent cooking of P. alba ${\times}$ glandulosa showed good delignification at the solvent system which the mixture ratio of p-cresol and water were 2:8(v/v), while the cooking of P. koraiensis with the p-cresol and water mixture ratio of 5:5 was no good. 2. P. alba ${\times}$ glandulosa showed three step-delignification phenomena at the solvent system which the mixture ratio of p-cresol and water were 2:8(v/v) anti 5:5(v/v). But P. koraiensis showed a first order delignification reaction at the same mixture ratio of p-cresol and water solvent system. 3. In TEM micrograph obtained for the solvent system which the mixture ratio of p-cresol and water was 5:5(v/v), the partial delignification of the cell corner of P. alba ${\times}$ glandulosa and P. koraiensis were observed at 60min. of cooking time. Complete delignification at the cell corner of P. alba ${\times}$ glandulosa was observed at 160min. and that of P. koraiensis was observed of 180min. of cooking time. 4. In optical microscopic observation, fiber separation of P. alba ${\times}$ glandulosa occured at 120min. and that of P. koraiensis began at 140min. of cooking time. 5. At the solvent system which the mixture ratio of p-cresol and water was 5:5(v/v), middle layer on secondary wall($S_2$) and cell corner of P. alba ${\times}$ glandulosa were more selectively delignified than primary wall(P) and outer layer on secondary wall($S_1$). However P. koraiensis did not showed any difference in delignification between cell wall layers and cell corner.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.350-359
• /
• 2001

목적 - 근관형성시 근관내 상아질벽에는 항상 도말층(smear layer)이 형성되는데, 이는 상아질, 치수조직 잔사, 조상아세포 돌기, 때로는 미생물 등으로 구성되며, 주사전자현미경상으로는 비규칙적이며, 무정형의 구상(granular)구조물로 관찰된다. 본 연구에서는 도말층의 유무에 따른 혐기성 미생물, Prevotella nigrescens의 근관내 상아질 부착정도를 주사전자현미경으로 평가하고자 한다. 지금까지 사용되었던 실험방법에 비하여 보다 임상적 환경에 가까운 실험방법을 고안, 신빙성 있는 연구결과를 기대할 수 있도록 하였다. 방법 - 치주질환이나 외상 등의 원인으로 발거된 상, 하악 전치 18개를 사용하였다. 각 치아의 치관부를 백악법랑경계부위에서 절단하고, 1군(5개치아)은 10ml의 생리식 염수를, 2군(5개치아)과 3군(5개치아)은 10ml의 3.5% NaOCl을 근관관주용액으로 사용하여 근관형성을 하였다. 근관형성 완료후 1군과 2군은 10ml의 생리식염수로, 3군은 10ml의 0.5M EDTA용액으로 final flush를 시행하여, 3군의 도말층을 제거하였다. 치근수직절단과 ethylene oxide(EO) gas 소독후 1, 2, 3군의 시편(각군10개시편)을 Prevotella nigrescens가 부유된 Brain Heart Infusion with Yeast estract, Hemin and Menadione(BHIYHM) broth내에 37$^{\circ}C$에서 3시간 동안 incubation했다. 4, 5, 6군은 실험과정을 검증하기 위한 대조군으로써, 4군(1개치아)과 5군(1개치아)은 1군, 2군과 같이 각각 생리식염수와 NaOCl만을 이용한 근관형성으로 도말층을 잔존시키고, 6군(1개치아)은 3군과 같이 NaOCl과 EDTA를 적용하여 도말층을 제거한 후, 치근 수직절단과 EO gas 소독을 시행했다. 모든 시편(1, 2, 3, 4, 5, 6군)을 통상의 방법에 따라 처리한 후 주사전자현미경을 통하여 관찰, 근관내면에 부착되어 있는 Prevotella nigrescens의 개수, 모양, 상아세관 및 도말층과의 관계 등을 관찰, 비교, 분석하였다. 결과는 t-test와 one-way ANOVA를 통하여 통계처리 하였다. 결론 - 1. 근관형성 후 근관내 상아질 표면 전체는 도말층으로 덮여 있는 양상을 보였다. 2. 3.5% NaOCl과 0.5M EDTA를 적용하여 근관내 도말층을 효과적으로 제거할 수 있었으며, 상아세관 개구부가 확연히 노출되어 있는 소견을 관찰할 수 있었다. 3. 도말층이 덮인군에서 미생물의 부착이 유의성 있게 높았다(P<0.05). 4. 근관 형성중 형성되어 근관 상아질을 덮고 있는 도말층이 미생물의 부착을 증가시켜, 근관 재감염의 기회를 증가시킴을 알 수 있었다.

• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.573-582
• /
• 2013

This study was done in order to investigate the bioconversion of ginsenoside, as well as the quality characteristics of fermented ginseng, by using lactic acid bacteria. Quality characteristics such as the thin layer chromatography(TLC) pattern, ginsenosides, total phenolic content, electron donating ability, and total sugar of fermenting ginseng and red ginseng were analyzed. The ginsenoside Rg2r, Rh2s and Rh2r of the fermented ginseng and red ginseng for 65 hours at a temperature of $37^{\circ}C$ were not detected. The ginsenoside Rg1 and Re contents have decreased, while the Rh1, Rg2s, Rd, Rg3r, and Rg3s have increased due to fermentation. The ginsenoside Rg3 of the fermented red ginseng has increased and the contents were $114.83{\sim}131.68{\mu}g/mL$ (control $104.56{\mu}g/mL$). The total phenolic content and electron donating ability of the red ginseng have totally decreased after 7 days of fermentation. The total phenolic contents of the fermented ginseng and red ginseng with different lactic acid bacteria did not show any tendency as different strains. The electron donating ability of the fermented ginseng has increased; however, the electron donating ability of the red ginseng has decreased. The total sugars of the fermented ginseng and red ginseng with different lactic acid bacteria have also decreased.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.379-386
• /
• 2004

The WAP 2.0 system is a newly proposed wireless communication system by the WAP Forum for interoperability across Internet environment and the system takes charge of communication between WAP terminals and existing origin Web servers. The purpose of this paper is 1) to construct a WAP 2.0 proxy proposed by the WAP Forum and 2) to improve the WAP Proxy in order to increase communication efficiency between wired and wireless communication objects. The Improved WAP proxy constructed in this study provides links between wired and wireless communication environments using the split-TCP concept. However, unlike the split-TCP connection, The improved WAP proxy maintains TCP's end-to-end semantics and reduces overhead by avoiding operations as much as possible on the upper protocol layer. In addition, The improved WAP proxy supports SACK(Selective Acknowledgement ) option and Timestamp option for speedy re-transmission which leads to reduction of performance degradation. After constructing the improved WAP proxy under Linux environment, experiments have been taken. The experimental results show that, compared with the experiments when a WAP proxy proposed by the WAP Forum is used, both data transmission delay time and data transmission size decrease to show that communication efficiency is increased. In particular, as packet missing ratio Increases, data transmission size decreases, which demonstrates that the improved WAP proxy is very effective for performance improvement in wireless communication environment.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.19-25
• /
• 1989

In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.224-231
• /
• 2000

The exfoliation of graphite (layer) was progressed due to the irreversible insertion of PC molecules between graphene layers, when propylene carbonate (PC) solvent was used as the organic solvents. The problem could be mitigated by the replacement of PC by ethylene carbonate (EC). But, the freezing point of EC-based electrolyte increased due to the high freezing point of $EC(36.2^{\circ}C)$. Therefore, EC+PC mixed electrolyte is expected as a good organic electrolyte for lithium ion battery. The EC-based organic electrolyte containing PC within pertinent quantity can be expected to have high molar conductivity and reduced exfoliation of graphite layer. The dielectric constant and molar conductivity of $LiPF_6/PC+EC+DEC$ electrolyte was investigated with a variation in the PC content. The electrochemical properties of carbon electrode in the electrolyte were also investigated. Molar conductivity and dielectric constant increased linearly by increasing the PC volume fraction in the electrolyte. The results of charge-discharge test for carbon/electrolyte/Li cell indicated that the initial irreversible specific capacity(IIC) of MCMB-6-28s and MPCF3000 decreased by the addition of $0.83 vol\%$ of PC, but increased with PC content over than $0.83 vol\%$. In the case of MPCF3000 and PCG100 having less than $10 vol\%$ PC, IIC was lower than 50 mAh/g. The discharge specific capacities varied with carbon material, but did not vary with PC content in the electrolyte.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.81-85
• /
• 2007

MnTe layers of high crystalline quality were successfully grown on Si(100) : B and Si(111) substrates by molecular beam epitaxy (MBE). Under tellurium-rich condition and the substrate temperature around $400^{\circ}C$, a layer thickness of $700{\AA}$ could be easily obtained with the growth rate of $1.1 {\AA}/s$. We investigated the structural, magnetic and transport properties of MnTe layers by using x-ray diffraction (XRD), superconducting quantum interference device (SQUID) magnetometry, and physical properties measurement system (PPMS). Characterization of MnTe layers on Si(100) : B and Si(111) substrates by XRD revealed a hexagonal structure of polycrystals with lattice parameters, ${\alpha}=4.143{\pm}0.001{\AA}\;and\;c=6.707{\pm}0.001{\AA}$. Investigation of magnetic and transport properties of MnTe films showed anomalies unlike antiferromagnetic powder MnTe. The temperature dependence of the magnetization data taken in zero-field-tooling (ZFC) and field-cooling (FC) conditions indicates three magnetic transitions at around 21, 49, and 210 K as well as the great irreversibility between ZFC and FC magnetization in the films. These anomalies are attributable to a magnetic-elastic coupling in the films. Magnetization measurements indicate ferromagnetic behaviour with hysteresis loops at 5 and 300 K for MnTe polycrystalline film. The coercivity ($H_c$) values at 5 and 300 K are 55 and 44 Oe, respectively. In electro-transport measurements, the temperature dependence of resistivity revealed a noticeable semiconducting behaviours and showed conduction via Mott variable range hopping at low temperatures.