• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.471-475
• /
• 2004

The solubility of N,N'-Bis(salicylidene) ethylenediamine (n-salen) and N,N'-bis(3,5-di-tert-butylsalicylidene) ethylenediamine (t-butyl-salen) was studied with in-situ UV-VIS spectrometer. n-Salen is 3-5 times more soluble than t-butyl-salen in liquid or supercritical $CO_2$. This behavior may be attributed to Lewis acid-base interaction between salen and $CO_2$. The chelation of salen with $Co^{++}$ ion in supercritical condition was confirmed to be fast enough above room temperature. However, the metal ion extraction capability of t-butyl salen is relatively poor because of its low solubility and ionic nature of complex.

• Macromolecular Research
• /
• 제16권6호
• /
• pp.555-560
• /
• 2008

A series of hydroxyl-group containing polyimides (HPIs) were prepared in order to investigate the structure-gas permeation property relationship. Each polymer membrane had structural characteristics that varied according to the dianhydride monomers. The imidization processes were monitored using spectroscopic and thermog-ravimetric analyses. The single gas permeability of He, $H_2$, $CO_2$, $O_2$, $N_2$ and $CH_4$ were measured and compared in order to determine the effect of the polymer structure and functional -OH groups on the gas transport properties. Surprisingly, the ideal selectivity of $CO_2/CH_4$ and $H_2/CH_4$ increased with increasing level of -OH incorporation, which affected the diffusion of $H_2$ or the solubility of $CO_2$ in HPIs. For $H_2/CH_4$ separation, the difference in the diffusion coefficients of $H_2$ and $CH_4$ was the main factor for improving the performance without showing any changes in the solubility coefficients. However, the solubility coefficient of $CO_2$ in the HPIs increased at least four fold compared with the conventional polyimide membranes depending on the polymer structures. Based on these results, the polymer membranes modified with -OH groups in the polymer backbone showed favorable gas permeation and separation performance.

• 한국식품과학회지
• /
• 제46권2호
• /
• pp.180-188
• /
• 2014

본 실험에서는 coenzyme $Q_{10}$을 cyclodextrin, starch를 이용하여 각각 복합체를 형성하고 형성된 복합체의 용해도 및 구조적 특성을 확인하였다. Starch 복합체는 용해 온도가 증가할수록 복합체 및 복합체내의 coenzyme $Q_{10}$의 용해도가 유의적으로 증가하는데 비해 cyclodextrin 복합체는 $37^{\circ}C$에서 coenzyme $Q_{10}$의 최대 용해도를 보였으며 이후 $50^{\circ}C$에서는 강하게 aggreagation이 일어났고, $80^{\circ}C$에서는 약해진 결합에 의해 복합체가 깨짐으로써 coenzyme $Q_{10}$이 물 위에 뜨는 형상을 나타내었다. 두 복합체의 구조적 차이를 FT-IR, XRD, DSC를 통하여 확인한 결과 cyclodextrin 복합체는 coenzyme $Q_{10}$의 isoprenoid chain에 주로 포접이 되어 있는데 반해 starch 복합체는 coenzyme $Q_{10}$의 isoprenoid chain 뿐만 아니라 benzoquinone ring에도 포접되어 있는 것을 확인하였고, 또한 starch 복합체가 cyclodextrin 복합체에 비해 coenzyme $Q_{10}$ 무정형영역이 더 크게 증가되어 있는 것을 확인하였다. In vitro simulated digestion model을 통하여 각 소화기관 별 복합체의 방출 패턴을 확인 한 결과 두 복합체 모두 구강, 위장의 효소 및 조건에 비해 소장의 효소와 조건에서 유의적으로 크게 coenzyme $Q_{10}$의 방출이 확인되었다. 따라서 coenzyme $Q_{10}$은 cyclodextrin, starch와 포접되어 복합체를 형성함으로서 생체이용율의 향상을 기대할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2797-2800
• /
• 2010

For the purpose of developing advanced new absorbents for carbon dioxide, ionic liquids (ILs) are considered as alternative materials due to their superior properties to conventional organic solvents. Since low $CO_2$ solubility in ionic liquids is a major concern for their application as absorbents, it is essential to focus on improving $CO_2$ absorbing capability of ILs. In this paper, strongly basic ionic liquids, namely [$C_n$-mim]OPh (n = 2, 4, 6), have been synthesized and studied over a wide range of temperature and pressure changes. [$C_n$-mim]OPh can be easily synthesized from corresponding [$C_n$-mim]Cl and sodium phenoxide and has been found to be good $CO_2$ absorbents.

• 한국식품영양과학회지
• /
• 제26권3호
• /
• pp.436-442
• /
• 1997

Corn starch was extruded under relatively low shear, high moisture, and low temperature. Puffing of corn starch dough was induced by injecting $CO_2$gas in the range from 0MPa to 0.09MPa. Piece density and compressive modulus for puffed corn starch were decreased by increasing the injection pressure to 0.07MPa, and increased above 0.07MPa. the microstructure of corn starch puffed with $CO_2$gas showed thick cell size, compared with those puffed with steam. RVA paste viscosity curves of corn starch puffed with $CO_2$had different patterns from those puffed with steam, probably resulted from partial gelatinization of starch. Water absorption and solubility were not significantly changed by $CO_2$injection pressure, but the average degree of polymerization was reduced by higher $CO_2$injection. The water absorption, water solubility, and the average degree of polymerization for corn starch puffed with $CO_2$were significantly lower than those puffed with steam.

• Advances in environmental research
• /
• 제4권1호
• /
• pp.17-24
• /
• 2015

In this study, we numerically investigated the effect of pressure (100-250 bar), temperature (274-288 K), and salinity (3.5% w/w electrolytes) on $CO_2$ hydrate dissolution rates in the ocean. Mass transfer equations and $CO_2$ solubility data were used to estimate the $CO_2$ hydrate dissolution rates. The higher pressure and lower temperature significantly reduced the $CO_2$ hydrate dissolution rates due to the increase of $CO_2$ particle density. In the high salinity condition, the rates of $CO_2$ hydrate dissolution were decreased compared to pure water control. This is due to decrease of $CO_2$ solubility in surrounding water, thus reducing the mass transfer of $CO_2$ from the hydrate particle to $CO_2$ under-saturated water. The results obtained from this study could provide fundamental knowledge to slow down or prevent the $CO_2$ hydrate dissolution for long-term stable $CO_2$ storage in the ocean as a form of $CO_2$ hydrate.

• 한국가스학회지
• /
• 제27권2호
• /
• pp.25-31
• /
• 2023

화학적 CO₂ 흡수 공정에 많이 사용되는 모노에탄올아민(MEA)을 사용하여 매립지가스(LFG)에서 이산화탄소(CO₂)를 포집하여 매립지가스를 이용한 발전용 엔진의 열효율을 증가시키고자 하는 것이 본 연구의 목적이다. LFG를 에너지원으로 사용하는 것은 온실가스 배출량을 줄이는 수단이 될 수 있기 때문에 MEA를 이용하여 LFG 중의 CO₂를 줄이고 CH₄의 농도를 높여 발전 효율을 향상시킬 수 있게 된다. 본 연구에서는 MEA 용액에서 CO₂와 CH₄의 용해도를 측정하고 다양한 조건에서 용해도를 높이고 용해 특성을 분석하기 위해 실험을 수행했다. 그 결과 반응 가스에 대한 MEA의 비율이 증가함에 따라 CO₂ 흡수율이 증가하는 것으로 나타났다. CO₂ 용해도를 최대화하기 위한 최적의 MEA 농도가 있으며, 이 농도 이상으로 농도를 높여도 용해도가 크게 향상되지 않았다. 본 연구는 온실가스 배출량을 줄이면서 LFG에서 CO₂를 포집하고 CH₄의 농도를 높여 보다 실용적인 연료를 개발할 수 있는 기반 연구를 수행했다.

• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.115-120
• /
• 2024

In this study, the extent of water removal in the high-moisture coal was measured. The simplified adsorption model was developed to predict the extent of water removal. The water removal was observed to increase up to 25% at saturation condition of 25℃. The modeling work shows that adsorption contributes the water removal only by 3%, whereas other factors such as CO₂ solubility and wettability would be responsible for the water removal.

• 분석과학
• /
• 제24권6호
• /
• pp.467-476
• /
• 2011

Methylsulfate 음이온을 갖는 이미다졸리움계 이온성 액체들을 대상으로 이온성 액체에 녹는 이산화탄소의 용해도를 측정하고, 이온성 액체가 가지고 있는 양이온의 변화에 따른 용해도의 차이를 비교하였다. 본 연구에서 사용한 methylsulfate 음이온을 가진 이온성 액체는 1-ethyl-3-methylimidazolium methylsulfate ([emim][$mSO_4$])와 1-butyl-3-methylimidazolium methylsulfate ([bmim][$mSO_4$])였다. 가변부피투시창(variable-volume view cell)이 장착된 고압용 상평형 장치를 사용하여 303.15 K에서 343.15 K까지 온도를 변화시키면서 여러 가지 조성을 갖는 이온성 액체와 이산화탄소의 혼합물의 기포점 압력을 측정함으로써 이온성 액체에서의 고압 이산화탄소의 용해도를 측정하였다. 이온성 액체에서 이산화탄소의 농도가 증가함에 따라 압력이 급격히 증가하였으며, 온도가 증가함에 따라 용해도는 감소하였다. 또한 이미다졸리움 양이온에 붙어 있는 알킬 체인의 길이가 길수록 높은 용해도를 가지는 것으로 나타났다. Peng-Robinson 상태방정식을 사용하여 이온성 액체와 이산화탄소 혼합물 시스템에 대한 상평형 모델링을 수행하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.146-150
• /
• 2010

A distinguished class of hydrophobic ionic liquids bearing a Br${\o}$nsted acidic character derived from amide-like compounds were prepared by a neutralization reaction of N,N-diethylformamide, N,N-dibutylformamide, 1-formylpiperidine, and $\varepsilon$-caprolactam with trifluoroacetic acid and physical absorptions of $CO_2$ in these ionic liquids were demonstrated and evaluated. $CO_2$ solubilities in these ionic liquids were influenced by the molecular structure of the cation and were apparently increased with the molar volume. Comparison based on a volume unit reveals that $CO_2$ solubilities in these liquids are relatively higher than those in imidazolium-based ionic liquids. Henry's coefficients calculated from low-pressure solubility tests at 313 to 333 K were used to derive the thermodynamics quantities. Enthalpy and entropy of solvation may share equal contributions in solubility.