• Resources Recycling
• /
• v.22 no.6
• /
• pp.3-11
• /
• 2013

This study was carried out to estimate greenhouse gas reduction potentials under treatment methods of combustible wastes excavated from closed landfill. The treatment methods of solid wastes were landfilling, incineration, and production of solid recovery fuel. The greenhouse gas reduction potentials were calculated using the default emission factor presented by IPCC G/L method of IPCC (Intergovernmental Panel on Climate Change). The composition of excavated waste represented that screened soil was the highest (65.96%), followed by vinyl/plastic (19.18%). This means its own component is similar to the other excavated waste from unsanitary landfill sites. Additionally, its bulk density was 0.74 $t/m^3$. In case of landfilling of excavated waste, greenhouse gas emission quantity was 60,542 $tCO_2$. In case of incineration of excavated waste, greenhouse gas emission quantity was 9,933 $tCO_2$. However, solid recovery fuel from excavated waste reduced 33,738 $tCO_2$ of the greenhouse gas emission quantity. Therefore, solid recovery fuel production is helpful to reduce of greenhouse gas emission.

• Journal of the Korean Society of Combustion
• /
• v.7 no.4
• /
• pp.29-35
• /
• 2002

[$CO_2$] is a well-known greenhouse gas, which is the major source of global warming. Many researchers have studied to reduce $CO_2$ emission in combustion processes. The central method of low $CO_2$ emission is Oxygen/CxHy combustion. Theoretically Oxygen/CxHy combustion only produces $CO_2\;and\;H_2O$ and allows convenient recovery of $CO_2$. The combustion characteristics, flame stability, composition in the flame zone and temperature profile were studied experimentally for various compositions of oxidant by substituting $CO_2\;for\;N_2$ with the constant $O_2$ concentration. Results showed that flame became unstable due to the high heat capacity, low transport rate and strong radiation effect of $CO_2$ in comparison with those of $N_2$. The reaction zone was quenched and broadened, as the ratio of $CO_2\;to\;N_2$ was increased. The emission of NOx in flue gas decreased due to the decreased temperature of the reaction zone. As the conversion ratio of $CO_2\;to\;N_2$ was increased, the emission of CO and the higher temperature zone increased due to decrease of reaction rate by the a quenching effect.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.10
• /
• pp.523-529
• /
• 2004

Faults of cellulosic insulations greatly affect the life span of oil immersed transformers because their performance recovery is impossible. Therefore, the reliable diagnosis technologies are needed for detection of the faults. Dissolved gas analysis technologies using CO and $CO_2$ gases have been widely used for fault diagnosis of cellulosic insulations. In this research, we described Degradation diagnosis of insulation paper CO and $CO_2$ gases in oil immersed Transformers using. We considered the distribution characteristics of CO, $CO_2$ gases' concentrations and ratios of $CO_2$/CO not only in serviced transformers but in experiments with typical fault causes such as heat, partial discharge and moisture. As result, the reliability of diagnosis results for the cellulosic insulations can be improved when the concentrations of CO, $CO_2$ and the ratio of CO/$CO_2$ satisfy each diagnosis criterion at a tim

• Asian Journal of Turfgrass Science
• /
• v.21 no.2
• /
• pp.127-135
• /
• 2007

Korea and Japan hosted the FIFA World Cup Soccer Game in 2002. Ten stadiums had been built and more than 30 soccer grounds for practice were renovated in Korea. Sport fields in both countries had problems on cool-season turfgrass growth and quality by summer decline during humid and warm climate especially followed by intensive uses. We measured the effects of air-flow system, which is designed to optimize rootzone soil gas and moisture levels to promote the growth and maintenance turfgrass. This experiment was carried out to verify the effects of the system on soil gas exchange, ground resilience, and turfgrass recovery in turfgrass rootzone. Within 1 or 2hr of operation of the system, rootzone soil gas ($CO_2$, $O_2$) levels returned to natural atmospheric levels completely Soil $CO_2$ levels began to decrease within the first 10 min of operation of the system. The levels were reduced from 1.3 to 0.06% after 30 min, and natural atmospheric levels within 1 hr. When the system was turned off, $CO_2$ levels increased to 0.36% and 0.7% after 5 and 20 hr, respectively. The application of the system did not affect the resilience of turf surface after traffic treatments. Higher traffic treatment resulted in higher surface resilience especially in zoysiagrass plots. Operation of the system had a significant beneficial impact on turf recovery by increased root dry wight and improved turf quality, as compared with the non-operated check plots.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.269-278
• /
• 2013

Sulfur hexafloride($SF_6$) emission to atmosphere is lower than $CO_2$, but $SF_6$ GWP is 22,800 times lager than $CO_2$. In recent years as restriction of $non-CO_2$ gas has been greatly reinforced, development of environment-friendly technology with $SF_6$ removal is becoming to main issue. This study shows that $SF_6$ used insulator electrical equipment has emission characteristics during the each phase(maintenance, use, diposal), and analyzed $SF_6$ emission reduction technology related phase. The major technology applies maintenance and disposal step is that improvment of gas recovery rate($85{\rightarrow}99%$), manufacturing catalysts, internal inspection of circuit breaker using endoscopy. Using those technolgies can reduce $SF_6$ emission in atmosphere.

• Journal of Veterinary Clinics
• /
• v.36 no.6
• /
• pp.306-313
• /
• 2019

It is important to identify the most suitable anesthetic agent that has minimal side effects to be able to control and perform surgeries on bears. In this study, we examined and compared the induction and recovery times as well as the physiological changes occurring during anesthesia induced by medetomidine-zolazepam/tiletamine (MZT) and xylazine-zolazepam/tiletamine (XZT) at general anesthesia for laparoscopic salpingectomy in 326 female Asiatic black bears. The body temperature, heart rate, respiratory rate, and levels of PaO₂ and EtCO₂ were the physiological changes measured during surgical procedures in female bears after anesthesia. In addition, the levels of pO₂, pCO₂, and sO₂ were measured using a portable blood gas analyzer. To induce recovery from anesthesia, bears anesthetized with MZT were intravenously administered atipamezole and bears anesthetized with XZT were intravenously administered yohimbine. The combination MZT, at dosages of 0.019 ± 0.001 mg/kg for medetomidine and 1.4 ± 0.1 mg/kg for ZT, or the combination XZT, at dosages of 2.0 ± 0.1 mg/kg for xylazine and 3.0 ± 0.1 mg/kg for ZT, proved to be reliable and effective in anesthetizing Asiatic black bears for a 40-min handling period for routine clinical procedures. The average anesthesia induction times were 16.5 ± 0.95 min for the bears in the MZT group and 12.0 ± 0.44 min for those in the XZT group. A significant difference was noted between the two drugs (P < 0.001) in terms of the average anesthesia induction time. The anesthesia induction time was shorter for bears with lower body weights than those with higher body weights (P < 0.05). The recovery time of MZT was significantly faster than that of XZT (11.3 ± 0.45 min vs. 18.5 ± 0.83 min) (P < .001). The bears anesthetized with MZT exhibited lower cardiopulmonary suppression than those anesthetized with XZT (P < 0.05). The body temperatures and EtCO₂ of bears in the M ZT group were significantly lower than those in the XZT group as time progressed after anesthesia (P < 0.05). The average pO₂ before the bears were supplied with oxygen was 64.8 ± 3.7 mmHg, but it increased to 211.5 ± 42.5 mmHg afterwards (P < 0.001). In conclusion, our results indicate that bears anesthetized with MZT have longer anesthesia induction time, shorter recovery time, slower heart and respiratory rates, and lower body temperatures and EtCO₂ than those anesthetized with XZT. These findings suggest that XZT is preferable to MZT, warranting further research on its uses and clinical responses in bears.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.3-12
• /
• 2015

We researched characteristics of heat recovery rate and fouling according to structures and materials in heat exchangers like water preheater and air preheater. Economizer and air preheater have used in thermal electric power plant. we made small incinerator and heat exchangers to carry out simulated experiment. We observed fouling formation and change of heat recovery rate, combusting powdered coal for 24 hr. In economizer, fin tube type had the largest amount of fouling formation, followed by tube line type > pipe type > auto washing type according to structures. As heat recovery rate, fin tube showed highest recovery rate, followed by auto washing type > pipe type > tube line type. In air preheater, fin tube type had the largest amount of fouling formation, followed by fin plate type > pipe type > pipe type coated by teflon > pipe type coated by ceramic according to structures. And then, heat recovery rate showed the same oder.

• Clean Technology
• /
• v.7 no.1
• /
• pp.51-63
• /
• 2001

In this study, PSA, known as the most economic process, was used to recover $CO_2$ from the power-plant flue gas. Activated carbon and zeolite molecular sieve 13X were used as adsorbent. Activated carbon has been deemed inadequated adsorbent for separating $CO_2$ from the flue gas. However, highly concentrated $CO_2$ could be obtained as a product on the activated carbon adsorbent using the new operating cycle modifying the rinse step. Also, the recovery of $CO_2$ was improved using double-layered adsorption column packed with the activated carbon and the zeolite 13X simultaneously. Adsorption column was filled with the activated carbon in the feed-end side, and the zeolite 13X in the product-end side. The recovery of $CO_2$ increased about 40% with only 25% zeolite, and increased 67% with 50% zeolite at the experimental conditions of 13% $CO_2$ concentration, 10 SLPM flow rate and 2.2 atm adsorption pressure.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.414-417
• /
• 2014

LED scraps consisting of highly crystalline GaN and their leaching behavior are comprehensively investigated for hydro-metallurgical recovery of rare metals. Highly stable GaN renders the leaching of the LED scraps extremely difficult in ordinary acidic and basic media. More favorable state can be obtained by way of high temperature solid-gas reaction of GaN-$Na_2CO_3$ powder mixture, ball-milled thoroughly at room temperature and subsequently oxidized under ambient air environment at $1000-1200^{\circ}C$ in a horizontal tube furnace, where GaN was effectively oxidized into gallium oxides. Stoichiometry analysis reveals that GaN is completely transformed into gallium oxides with Ga contents of ~73 wt%. Accordingly, the oxidized powder can be suitably leached to ~96% efficiency in a boiling 4 M HCl solution, experimentally confirming the feasibility of Ga recycling system development.

• Membrane Journal
• /
• v.22 no.1
• /
• pp.54-61
• /
• 2012

To separate and recover of VOCs, supporting membranes using PEI were prepared by phase separation method and it was coated with PDMS to prepare PEI-PDMS hollow composite membrane. To investigate characteristic of prepared membrane, pure gas permeability was measured using oxygen and nitrogen, the stage cut and permeance property with feed concentration were evaluated using xylene, ethyl benzene, toluene and cyclohexane. Also, to check solvent resistance on VOCs, stress-strain property of membrane with immersion time in solvent were measured by DMA. The permeance value of $O_2$ and $N_2$ showed 63 GPU and 30 GPU respectively. Permeated VOCs concentration was decreased with increasing stage cut. But, conversely, recovery efficiency that was increased with increasing stage cut. As a result of DMA test, the stress and strain were 11.93 MPa and 13.52%, respectively.