• Water for future
• /
• v.27 no.3
• /
• pp.107-113
• /
• 1994

The analysis of Richards eq. requires data of the soil water retention function and the unsaturated hydraulic conductivity. The soil water retention function was measured through the use of the developed apparatus and the saturated hydraulic conductivity was measured by the constant head method for each soil sample corresponding to the A, B, C types of SCS. In order to obtain one water retention function and one unsaturated hydraulic conductivity which represent each soil group, van Genuchten's eq. and Mualem's pore-structure model was chosen respectively. Parameters of van Genuchten's eq. are estimated for each soil group using data obtained in the experiments, and estimated values give a basis to analyze the unsaturated flow in the non-measured region efficiently.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.2
• /
• pp.89-93
• /
• 1997

As industry gets rapidly automatic, D.C servo motor which is controlled by a PI controller needs accurate control. However, when a system has various characters, it is very difficult to guarantee its accuracy. In this paper, rule-based auto-tuning PI controller for motor speed control system is presented as a way of solving this problem. Some rules are based on Ziegler-Nichols step response and expert knowledge. Control parameters are determined by error, slope, steepest slope point, and permiSSIon overshoot. The accuracy of control is demonstrated by a computer s mulation .

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1047-1052
• /
• 2010

Influence of lateral spring constant on energy dissipation and load reduction factor with erespect to lateral vibration of steel sheet pile installed by vibratory pile driver. Energy dissipation and load reduction factor varying with free length of steel sheet pile are more affected by eccentricity than flexural rigidity of steel sheet pile regardless of the magnitudes of lateral spring constants. Load reduction factors were converged when lateral spring constant was equal or larger than 10000N/m.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2179-2183
• /
• 2008

지금까지 분포형 모형 개발에 대한 많은 노력이 있음에도 불구하고 여러 제약사항들에 의해 잠재력을 보여주는 정도로 활용되어 왔으나, 최근 급속도로 발전하는 컴퓨터의 계산능력, DEM 등 디지털정보의 구축이 진행되어 오고 있고, GIS 및 인공위성 영상기법의 발달로 공간적인 비균질성을 고려하여 유출과정에서 운동역학적인 이론을 기반으로 물의 흐름을 수리학적으로 추적해 나가는 물리적기반의 분포형 유출모형의 활용도가 높아지고 있다. 본 모형개발에 있어 이론적 배경이 된 모형은 1998년부터 일본 교토대학 방재연구소 코지리 연구실에서 개발 중인 Hydro-BEAM으로 유역 물순환의 건전성을 평가하기 위하여 장기간의 유역 내 유량, 수질을 시계열 및 공간적으로 파악하여 유역의 영향평가를 위해 개발된 물리적 기반의 격자구조를 가진 분포형 장기유출 모형이다. 유출량 계산은 유역내 수평 유출량산정 모듈로서 평면 분포형의 격자형을, 연직 분포형으로는 $A{\sim}B$층의 수평유출량은 하천으로 유입하고, C층은 하천유량에 영향을 미치지 않는 지하수층으로 가정하는 다층모형을 이용해서 A층, 지표 및 하도흐름은 운동파 법(kinematic wave)으로, $B{\sim}C$층의 유출량은 선형저류법으로 계산하는 모형이다. 본 연구에서는 격자흐름방향을 4방향에서 8방향으로 개선하였고, 모형의 각종 수문매개변수들을 GIS와 연계하여 직접 입력할 수 있도록 하였으며, 물리적기반의 침투과정을 모의할 수 있도록 Green & Ampt모듈을 추가하고, 향후 레이더 강우 및 수치예보강우의 홍수유출예측을 염두에 두고 격자강우량을 활용할 수 있도록 하는 등 홍수유출해석을 위한 분포형 강우-유출모형으로 개선 하였고, 이를 남강댐유역에 적용해 봄으로써 모형의 적용성을 검토해 보고자 하였다. 홍수기동안의 지표흐름과 지표하 흐름의 시간적 변화와 공간적 분포를 모의할 수 있었으며, 전처리과정으로서 ArcGIS 혹은 ArcView등의 GIS 프로그램을 이용하여 모형에 필요한 ASCII형태의 입력 매개 변수 자료들을 가공하였다. 또한 후처리과정으로서 모형의 수행결과인 유역내의 유출량 분포 등을 GIS상에서 나타낼 수 있도록 ASCII형태로 출력하도록 구성하였다. 남강댐유역을 대상으로 유역을 500m의 정방형 격자로 분할하고 수계망을 통하여 유역 출구까지 운동파이론에 의해 추적 계산하였으며, 수문곡선 비교결과 재현성 높은 결과를 보여주었다. 모형의 정확성 및 실용성에 대한 보다 정확한 평가를 위해서는 향후 다양한 강우 사상 혹은 다양한 크기의 유역에 대한 유출량의 재현성 및 매개변수 등에 검증이 이루어져야 할 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.203-212
• /
• 2011

This paper investigates the caharactheristics of the earth pressure magnigue and distribution in jointed rockmass for a safe and economic design and construction of earth retaining structures installed in rock stratum. For this purpose, this study will first investigate the limitations and problems of the existing earth pressure studies and then to overcome them th study will conduct the discontinuum numerical parametric studies based on the Discrete Element Method (DEM), which can consider the joint characteristics in rock stratum. The controlled parameters include rock type and joint conditions (joint shear strength and joint angle), and the magnitude and distribution characteristics of earth pressure have been investigated considering the interactions between the ground and the retaining structures. In addition, the comparison between the earth pressures induced in rock stratum and Peck's earth pressure for soil ground has been carried out. From the comparison, it is found that the earth pressure magnitude and distribution in jointed rockmass has been highly affected by rock type and joint condition and has shown different characteristics compared with the Peck's empirical earth pressure. This result would hereafter be utilized as an important information and a useful data for the assessment of earth pressure for designing a retaining structures installed in jointed rockmass.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.2
• /
• pp.65-75
• /
• 2020

The efficiency of sewage treatment was ananlyzed selecting a sewage treatment plant in Gyeonggi-do where A₂O process was applied. Statistical techniques based on the operation data of the sewage treatment were used. The main factors directly affecting the efficiency of the treatment process were analyzed using a GPS-X model. The correlation analysis and one-way ANOVA were performed. The T-N and NH₄⁺-N values of the effluent did not generate statistically significant level (p-value:>0.05) when compared with C/N ration values. Removel of nitrogen components form sewage treatment plants were affected by temperature, HRT, SRT and DO. In the case of BOD, all operating factors were affected, while COD was affecte by factors of HRT, STR and DO. In simulations using GPS-X, the parameters that greatly influence was included the maximum sedimentation rate, the dependent nutrient microbial yield (anoxic), the phosphorus saturation coefficient, the dependent nutrient microbial killing rate, the dependent nutrient microbial maximum growth rate, and the independent trophic microorganisms. The maximum growth rate and the maximum setting rate were identified.

• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.211-221
• /
• 2003

The objectives of this study are to analyze the effects of time-area curve on Clark's watershed runoff method in addition to propose a GIS-based objective method for creating time-area curve. For the relative comparison of the variation of time-area curve to those of travel time and storage coefficient of Clark method, runoff sensitivities are performed on Soyang- and Chungju-dam watersheds for 1990. 9. 10~9. 14 event. The dimensionless time-area curve in HEC-1 that can be utilized in the case that the curve is not supplied is also tested in this study. The important results obtained in this study are as follows: The effects of time-area curve created by either GIS-based objective method or dimensionless curve are not significant for runoff analysis; The storage coefficient (K) and travel time( t$_{c}$), Clark's other two model parameters, are more sensitive than time-area curve for peak flow simulation. Therefore, it can be concluded that the parameters K and t$_{c}$ are more carefully estimated rather than time-area curve, when Clark method is used for runoff analysis.

• Korean journal of applied entomology
• /
• v.58 no.2
• /
• pp.111-120
• /
• 2019

Riptortus pedestris (Fabricius) (Hemiptera: Alydidae) is an economically important insect pest of soybean and fruit trees. We investigated the temperature effects on the adult fecundity and longevity, and determined the parameters of oviposition models and life table at different constant temperatures 15.8, 19.7, 24.0, 27.8, 32.6, 34.0, and $35.5^{\circ}C$. R. pedestris females reproduced successfully from 19.7 to $35.5^{\circ}C$ except $15.8^{\circ}C$. The longevity of R. pedestris was longest at $15.8^{\circ}C$ and it decreased with increasing temperature (76.6 days at $19.7^{\circ}C$ and 20.6 days at $35.5^{\circ}C$). The number of total eggs and viable eggs was highest at $24.0^{\circ}C$ (193.5 and 151.2). Egg hatchability was highest at $27.8^{\circ}C$ (84.0%). We compared the results of oviposition models and life table parameters using both total eggs and viable eggs. The parameter value (c: the maximum reproductive capacity) (190 eggs) of temperature dependent total fecundity model using total eggs was higher than that of the model using viable eggs. When we analyzed the life table parameter the values of net reproductive rate and mean generation time using viable eggs were lower than those using total eggs. The oviposition models and life table analysis using viable eggs will be helpful to understand the real population transition of R. pedestris in agricultural system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.247-253
• /
• 2017

Accurate flood frequency and magnitude estimation has a critical role in flood risk management and damage reduction. In United States, Log Pearson Type-III (LP-III) distribution with method of moments for parameter estimation has been uniformly and consistently employed in estimating design floods. After the first version of flood frequency guidelines (Bulletin 15) was published in 1967, the revised version Bulletin 17B has been employed since 1982 up to now. A new version of flood frequency guidelines, Bulletin 17C, is prepared and about to come out soon. In the current study, we analyzed the new features of the upcoming Bulletin 17C and presented case studies applying its new features. From the presented results, we see what critical components in the new design flood frequency guideline we could learn.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06b
• /
• pp.412-414
• /
• 2006

프로그램 분할은 분할 기준으로써 언급된 어떤 관심의 시점에서 계산되어진 값에 잠재적으로 영향을 미치는 프로그램의 부분들을 얻어내는 방법이다. 객체 지향 프로그램의 분할(slicing)은 객체가 메소드를 호출할 때 한 객체의 모든 데이터 멤버들을 실매개변수들(actual parameters)로 전달함으로써 데이터 멤버들을 구별한다. 그러나, 실제적으로 데이터 멤버들의 일부분만이 메소드에서 사용되어진다. 또한, 기존의 분할 방법들은 한 클래스의 메소드들에 있는 문장들만을 분할하는 것이다 클래스, 객체, 상속, 다형성, 동적 바인딩과 같은 객체 지향 프로그램의 독특한 특징들 때문에 문장 분할이 객체 지향 프로그램에 적용되는 것은 부적당하다. 본 논문에서는 객체 지향 언어중 가장 최근에 나왔으며 활용도가 높아지고 있는 C# 프로그램에 시스템 종속 그래프(System Dependence Graph)를 확장 및 적용한다.