• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.343-350
• /
• 2003

Using Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ powders prepared by solid state reaction and spray drying method, the nucleation and growth behaviors of superconducting and second phases were investigated during isothermal heat treatment. When the spray drying power was used in contrast with solid state reaction powder, Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2223) phase could be formed at the relatively shot time and second phases were much bigger. Quantitative analysis showed that as the heat treatment time increased, more Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2212) changed to 2223 and the major second phase was changed from (Sr,Ca)$_{14}$Cu$_{24}$ $O_{x}$(14:24) to (Sr,Ca)$_2$Cu$_1$ $O_{x}$ (2:l). The superconducting phase formed at the relatively short time 14:24 phase. Following the Bi-free phase of 14:24 Phase, but long time was needed in places far from the 14:24 phase. Following the formation of the 2212 phase near the 14:24 phase, the 2223 phase nucleated preferentially at the interface between the 2212 and 14:24 phases. The preferential nuclcation of 2223 was explained by its structural similarity and low Interfacial energy with both the Bi-free and 2212 Phases.12 Phases.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1029-1034
• /
• 2003

The Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$, superconducting thin films arc fabricated by using the sputtering and evaporation method. Because we confirmed the sticking ratio of Bi element in the Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$ superconducting thin film fabricated by using the sputtering method was much lower than the expected value, to get the enough number of the flakes of Bi, faraday cup was used to evaporate Bi clement. As a result of the fabrication, Bi 2201 and Bi 2212 single phases could be made by the optima of deposition condition. And we confirmed the sticking coefficient of Bi element was clearly related to the temperature change of the substrate and the generation of Bi22l2 phase

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.524-527
• /
• 2007

이온 빔 스퍼터법을 이용하여 저속성장으로 동시 증착에 의해 $Bi_2Sr_2Ca_{n-1}Cu_nO_x$(n=0, 1, 2) 박막을 제작하였다. Bi 2212 상은 기판온도 $750\sim795^{\circ}C$의 범위에서 나타났으며, $750^{\circ}C$보다 저온 측에서는 Bi 2201의 단일강이 존재하였나. 그러나, 조성과 관계되는 $PO_3$에 대해서 크게 변하지 않았다. 그리고 임계온도(Tc)가 $45\sim90K$ 가지는 c축 배향한 고품질의 Bi 2212 박막을 얻었다. 소수의 박막에서는 소량의 CuO가 불순물로 관찰되었으며, 얻어진 모든 박막에서 $CaCuO_2$의 불순물 상은 관찰되지 않았다.

• 한국재료학회지
• /
• 제17권3호
• /
• pp.147-151
• /
• 2007

Cu-free multi-component sol, of which final oxide composition becomes $Bi_{1.9}Pb{0.35}SrCaO,\;Bi_{1.8}Pb_{0.2}SrCaO\;and\;Bi_{1.5}SrCaO$, respectively, was prepared through sol-gel route and coated on a bare Cu substrate. Starting materials were metal-alkoxides as follows.; [$Bi(OC_{2}H_{5})_{3}\;Pb(O^{1}C_{3}H_{7})_{2},\;Sr(O^{i}C_{3}H_{7})_{2},\;Ca(OC_{2}H_{5})_{2}$] as a reagent grade. Transparent light yellowish sol was obtained in the case of $Bi_{1.9}Pb_{0.35}SrCaO\;and\;Bi_{1.8}Pb_{0.2}SrCaO$ composition and $Bi_{1.5}SrCaO$ composition's sol was light greenish. Each sol was repeatedly dip-coated on Cu substrate four times and pre-heated at $400^{\circ}C$ and finally heat-treated in the range of $740{\sim}900^{\circ}C$. In the results, crystalline phases confirmed by XRD were (2201) orthorhombic and monoclinic phases. However, only $Bi_{1.9}Pb_{0.35}SrCaO_{x}$ composition showed pseudo-superconductive behavior after heat-treatment at $900^{\circ}C$ for 12 seconds and then onset temperature was 77 K, even though it did not exhibit zero resistance below Tc.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 춘계학술발표회
• /
• pp.93-93
• /
• 1992

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.349-358
• /
• 2000

Fabrication and Characterization of Bi$_{2}$/Sr$_{2}$/CaCu$_{2}$/O$_{8}$(Bi2212) superconductor thick films were fabricated successfully on C tapes by liquid reaction between Cu-free precursors of Bi$_{x}$/SrCaO/$_{y}$(x=1.2-2) and Cu tapes. Cu-free Bi-Sr-Ca-O powder mixtures were screen-printed on Cu tapes and heat-treated at 850-87$0^{\circ}C$ for several minutes in air oxygen nitrogen and low oxygen pressure. In order to obtain the optimum heat-treatment condition we studied the effect of the precursor composition the printing thickness and the heat-treatment atmosphere on the superconducting properties of Bi2212 films and the reaction mechanism. Microstructures and phases of thick films were analyzed by films and the reaction mechanism. Microstructures and phases of thick films were analyzed by optical microscope and XRD. The electric properties of superonducting films were examined by the four probe method. At heat-treatment temperature the thick films were in a partially molten state by liquid reaction between CuO of the oxidized copper tape and the precursors which were printed on Cu tapes. During the heat-treatment procedure Bi2212 superconducting particle nucleate and grow in preferred orientations.ons.s.

• 한국전기전자재료학회논문지
• /
• 제18권5호
• /
• pp.464-467
• /
• 2005

BiSrCaCuO superconducting ceramic thick films were fabricated by chemical process. The x ray diffraction pattern of the BiSrCaCuO thick films contained 110 K phase. The critical temperature of BiSrCaCuO thick films were Tc=95 K-97 K. The critical temperature and critical density of BiSrCaCuO thick film grown at $750 {\circ}C$ were Tc = 95 K and $Jc= 7{\times}10^{6} A/cm^{2}$ We obtained high-Jc as-grown BiSrCaCuO on an MgO substrate by low fressure CVD.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.478-481
• /
• 2002

We carried out the experiments for fabricating $Bi_{2}Sr_{2}Ca_{2}Cu_{3}O_{x}$(Bi2223) superconductor thick films on Cu tapes. Cu-free (Bi,Pb)-Sr-Ca-0 powder mixtures were screen- printed on Cu tapes and heat-treated at 840-$860^{\circ}C$ for several minutes in air. Surface microstructures and phases of films were analyzed by XRD and optical microscope. The electric properties of superconducting films were examined by the four probe method. At heat-treatment temperature, the printing layers were in a partially molten state by liquid reaction between CuO in the oxidized copper tape and the precursors which were printed on Cu tapes. During the heat-treatment procedure, it is thought that Bi2223 superconducting particles nucleate at interfaces between Bi2212 phase and liquid.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.259-260
• /
• 2006

$Bi_2Sr_2Ca_{n-1}Cu_nO_x$ superconducting thin films have been fabricated by atomic layer-by-layer deposition using IBS(Ion Beam Sputtering) method During the deposition, 90 mol% ozone gas of typical pressure of $1{\sim}9{\times}10^{-5}$ T orr are supplied with ultraviolet light irradiation for oxidation. XRD and RHEED investigations reveal out that a buffer layer with some different compositions is formed at the early deposition stage of less than 10 units cell and then Bi-2201 oriented along the c-axis is grown.

• 한국재료학회지
• /
• 제5권5호
• /
• pp.583-597
• /
• 1995

We investigated the effect of the oxygne partial pressure on the phase stability of B $i_{2}$S $r_{2}$Ca C $u_{2}$ $O_{8+x}$ and B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ at 82$0^{\circ}C$. As the oxygen pressure decreased, B $i_{2}$Sr/sb 2/CaC $u_{2}$ $O_{8+x}$ melted at 2.2$\times$10$^{-3}$ atm $O_{2}$. In the case of the B $i_{1.7}$P $b_{0.4}$S $r_{2}$C $a_{2}$ $O_{10+x}$, it started to decompose into theree phases of B $i_{2}$S $r_{2}$Cu $O_{6+y}$, $Ca_{2}$Cu $O_{3}$ and C $u_{4}$ $O_{3}$ and C $u_{4}$ $O_{3}$ at 8.0$\times$10$^{-3}$ atm $O_{2}$ and was completely decomposed at 4.3$\times$10$^{-3}$ atm $O_{2}$ B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ phase was not formed by the solid state reaction from the mixutre of $i_{2}$S $r_{2}$CaCu.sub 2/ $O_{8+x}$, $Ca_{2}$Cu $O_{3}$ and CuO down to 2.2$\times$10.sub -3/ atm O.sub 2/ but formed by the solidifciation of the formed from the mixture of the intermediate compounds in the Bi-Sr-Ca-Cu-O system and the fromation temperature of Bi.sub 2/S $r_{2}$C $a_{2}$Cu.$_{3}$ $O_{10+x}$ can be lowered by reducing oxygen partial pressure.e.e.ure.e.e.