• Resources Recycling
• /
• v.21 no.5
• /
• pp.65-71
• /
• 2012

The equilibrium distribution of bismuth and lead between molten PbO-$SiO_2$ slag and bismuth phase was studied in the temperature range of $775^{\circ}C$ to $850^{\circ}C$ in a MgO crucible. The oxygen partial pressure of atmosphere was controlled by $P_{CO2}/P_{CO}$ ratio. The value of $(%PbO)_{slag}/[%Pb]_{metal}$ increased with increasing $SiO_2$ content of slag, and the value of $(%Bi_2O_3)_{slag}/[%Bi]_{metal}$ decreased with increasing $SiO_2$ content of slag. The concentration of Pb in metal increased with increasing temperature. These experimental results agreed well with the thermodynamic prediction.

• Korean Journal of Materials Research
• /
• v.30 no.2
• /
• pp.61-67
• /
• 2020

BiFeO₃ with perovskite structure is a well-known material that has both ferroelectric and antiferromagnetic properties called multiferroics. However, leaky electrical properties and difficulty of controlling stoichiometry due to Bi volatility and difficulty of obtaining high relative density due to high dependency on the ceramic process are issues for BiFeO₃ applications. In this work we investigated the sintering behavior of samples with different stoichiometries and sintering conditions. To understand the optimum sintering conditions, nonstoichiometric Bi_1±xFeO_3±δ ceramics and Ti-doped Bi_1.03Fe_1-4x/3Ti_xO₃ ceramics were synthesized by a conventional solid-state route. Dense single phase BiFeO₃ ceramics were successfully fabricated using a two-step sintering and quenching process. The effects of Bi volatility on microstructure were determined by Bi-excess and Ti doping. Bi-excess increased grain size, and Ti doping increased sintering temperature and decreased grain size. It should be noted that Ti-doping suppressed Bi volatility and stabilized the BiFeO₃ phase.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.8
• /
• pp.738-748
• /
• 2008

In this study, it has been investigated on the changing behavior of electrical properties in $ZnO-Bi_2O_3-Sb_2O_3$ (Sb/Bi=2.0, 1.0 and 0.5) ceramics. The samples were prepared by conventional ceramic process, and then characterized by I-V, C-V curve plots, impedance and modulus spectroscopy (IS & MS) measurement. The electrical properties of ZBS systems were strongly dependent on Sb/Bi. In ZBS systems, the varistor characteristics were deteriorated noticeably with increasing Sb/Bi and the donor density and interface state density were increased with increasing Sb/Bi. On the other hand, we observed that the grain boundary reacted actively with the ambient oxygen according to Sb/Bi ratio. Especially the grain boundaries of Sb/Bi=0.5 systems were divided into two types, i.e. sensitive to oxygen and thus electrically active one and electrically inactive intergranular one with temperature. Besides, the increased pyrochlore and $\beta$-spinel phase with Sb/Bi ratio caused the distributional inhomogeneity in the grain boundary barrier height and the temperature instability. To the contrary, the grain boundary layer was relatively homogeneous and more stable to temperature change and kept the system highly nonlinear at high Bi-rich phase contents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.147-147
• /
• 2013

Multiferroic material $BiFeO_3$ (BFO) is a typical multiferroic material with a room-temperature magnetoelectric coupling in view of high magnetic- and ferroelectric-ordering temperatures (Neel temperature $T_N$ ~ 647 K and Curie temperature TC ~1,103 K). Rare-earth ion substitution at the Bi sites is very interesting, which induces suppressed volatility of the Bi ion and improved ferroelectric properties. At the same time, the Fe-site substitution with magnetic ions is also attracting, since the enhanced ferromagnetism was reported. In this study, BFO, $Bi_{0.9}Dy_{0.1}FeO_3$ (BDFO), $BiFe_{0.97}Co_{0.03}O_3$ (BFCO) and $Bi_{0.9}Dy_{0.1}Fe_{0.97}Co_{0.03}O_3 $ (BDFCO) compounds were prepared by conventional solid-state reaction and wet-mixing method. High-purity $Bi_2O_3$, $Dy_2O_3$, $Fe_2O_3$ and $Co_3O_4$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ for 24 h. The samples were immediately put into an oven, which was heated up to 800oC and sintered in air for 1 h. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The electric polarization was measured at room temperature by using a standard ferroelectric tester (RT66B, Radiant Technologies). Dy and Co co-doping at the Bi and the Fe sites induce the enhancement of both magnetic and ferroelectric properties of $BiFeO_3$.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.245-250
• /
• 1998

Field emission display (FED) is currently being explored as a potential flat panel display technology. The need of new materials for low voltage blue phosphors for FED focused our attention on the $Y_2O_3-Nb_2O_5$ sys-tem. Yttrium niobate doped with $Bi^{3+}$ was prepared by solid state reaction technique and the optimization of the luminescent properties with a control of $Bi^{3+}$ amounts and Y/Nb ratio was studied. Under 254 nm and low voltage electron excitations $Bi^{3+}-activated$ YNbO4 phosphors showed a strong and relatively narrow blue em-ission band with a range of 420 to 450 nm, Especially 0.4wt% $Bi^{3+}\;doped\;YNbO_4$ phosphors with Y/Nb ratio of 1/1 showed the maximum emission intensity. Under low voltage electron excitation maximum emission in-tensity appeared at the Y/Nb ratio of 0.495/0.505.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.3
• /
• pp.195-201
• /
• 2003

The (Ba,Bi,Sr)TiO$_3$[BBST] thin films were fabricated on Pt/Ti/SiO$_2$ /Si substrate by RF sputtering method. The effects of Ar/O$_2$ ratio on the structural and dielectric properties of BBST thin films were investigated. Increasing the Ar/O$_2$ ratio, the intensity of BaBi$_4$Ti$_4$O$_{15}$ and Bi$_4$Ti$_3$O$_{12}$ peaks were increased but (Ba$_{0.5}$Sr$_{0.5}$)TiO$_3$ peak was decreased. In the BBST thin films deposited with condition of Ar/O$_2$(90/10) ratio, the composition ratio of the Ba, Bi and Sr atoms were 0.35, 0.25 and 0.4 respectively. The Bi and Ti atoms were diffused into the Pt layers. Increasing the Ar/O$_2$ ratio, the dielectric constant of the BBST thin films were increased but the dielectric loss of the BBST thin films were decreased. The dielectric constant and dielectric loss of the BBST deposited at 90/10 of Ar/O$_2$ ratio were 319 and 2.2%. respectively . Increasing the applied voltage, the capacitance of the BBST thin films were decreased.reased.

• Journal of the Korean Magnetics Society
• /
• v.20 no.6
• /
• pp.222-227
• /
• 2010

$BiFeO_3$ (BFO) thin films were deposited on Pt/Ti/$SiO_2$/Si(100) substrates by RF magnetron sputtering method at room temperature. The influence of the flow rate of $O_2$ gas on the preparation of $BiFeO_3$ thin films was studied. XRD results indicate that the $BiFeO_3$ thin films were crystallized to the perovskite structure with the presence of small amount of impurity phases. The flow rate of $O_2$ gas has great affect on the microstructures and magnetic properties of $BiFeO_3$ thin films. As flow rate of $O_2$ gas increased, roughness and grain size of the thin films increased. $BiFeO_3$ thin films exhibited weak ferromagnetic behavior at room temperature. The PFM images revealed correlation between the surface morphology and the piezoresponse, indicating that the piezoelectric coefficient is related to microstructure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.245-245
• /
• 2011

$BiFeO_3$ (BFO)박막에 전위금속 Pb와 Co를 각각 치환환 박막을 chemical solution deposition 방법으로 Pt/Ti/SiO2/Si(100) 기판위에 증착하였다. Bi 자리에 Pb와 Co를 20 at.% 치환하였으며, 치환된 $Bi_{0.8}Pb_{0.2}FeO_3$ (BPFO), $Bi_{0.8}Co_{0.2}FeO_3$ (BCFO) 박막의 구조적, 자기적 특성 변화를 BFO 박막과 비교하여 조사하였다. XRD 패턴을 분석한 결과 BPFO, BCFO 박막들은 모두 rhombohedrally distorted perovskite 구조였으며 불순물인 pyrochlore 상이 약하게 관측되었다. 치환이 이루어진 BPFO, BCFO 박막들의 자기 이력곡선은 안정된 포화곡선을 나타냈으며 BFO의 포화값(5 emu/$cm^3$)에 비해 크게 증가된 55 emu/$cm^3$, 35 emu/$cm^3$의 값을 나타냈다. 또한 보자력장(coercive field, Hc)값도 BFO의 500 Oe보다 크게 증가된 1,200 Oe, 800 Oe의 값을 보였다.

• Korean Journal of Crystallography
• /
• v.9 no.1
• /
• pp.30-38
• /
• 1998

A new frequency weighing sensor was applied to grow Bi12GeO20 crystals in the auto-di-ameter control system of Czochralski method. The rotation rate was varied in the range of 23 to 21 rpm to preserve flat interface in a given heat configuration. To prevent the constitutional super-cooling from the evaporation loss, 105% stoichiometric amount of Bi2O3 was employed, equivalent to 6.18 molar ratio of Bi2O3 to GeO2. Transparent and light brown Bi12GeO20 single crystal in uniform diameter was grown. The dislocation density was determined to be 103/cm2 corresponding to the optical quality in commercial applications. The grown crystal measured diameter 25 mm and length 70 mm and the preferred growth direction was confirmed to be <110>.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.14-14
• /
• 2009

In this study, we investigated the effects of Cr dopant on the bulk trap level and grain boundary characteristics of $Bi_2O_3$-based ZnO (ZB) using dielectric functions such as $Z^*$, $Y^*$, $M^*$, ${\varepsilon}^*$, and $tan{\delta}$. More than two bulk traps of $Zn_i$ and $V_o$ probably in different ionization states could be identified in ZBCr($ZnO-Bi_2O_3-Cr_2O_3$). The grain boundaries of ZBCr could be electrochemically divided into two types: sensitive to ambient oxygen and thus electrically active one and oxygen-insensitive and thus electrically inactive one.