• Journal of Applied Biological Chemistry
• /
• 제64권3호
• /
• pp.291-298
• /
• 2021

본 연구에서는 고지방식이(HFD)를 급식하여 제조한 비만마우스 모델을 사용하여 berberine (BBR)과 silibinin (SBN) 복합투여가 혈중 지질대사 및 항비만 개선 효능에 유의적인 시너지 효과가 있는지 조사하였다. HFD로 유도된 비만마우스를 8 주 동안 HFD의 지속적인 제공와 함께 BBR 및 SBN (BBR-SBN) 조합을 투여하였다. 실험이 진행되는 동안 체중과 식이량을 측정하였고 혈중 총 콜레스테롤, 중성지방 및 HDL 콜레스테롤 수준을 분석하였다. HFD를 제공한 마우스는 정상 대조군(NC) 그룹에 비해 체중과 총 콜레스테롤 및 중성지방 수치가 급격히 증가했다. 그러나 이러한 비만마우스에 BBR-SBN조합을 투여하였을 때 체중 증가가 현저하게 감소하였고 HDL 콜레스테롤 수치가 증가하였으며 총 콜레스테롤 및 중성지방 수치는 유의하게 억제되었다. HFD그룹의 복부지방 무게는 유의하게 증가했으며 부고환 지방조직 내의 지방세포의 크기가 NC 그룹에 비해 크게 확장된 것으로 나타났다. 그러나 BBR-SBN 그룹에서는 지방세포의 크기가 NC 그룹의 크기와 비슷했으며 복부지방 무게가 현저하게 감소하였다. 더불어, HFD 그룹에서 보이는 간 조직의 거대 소포성 지방구의 축적은 BBR-SBN 그룹에서 크게 감소되었다. 이러한 결과는 BBR-SBN 조합이 HFD 유발 비만마우스에서 체중 및 복부 지방 증가를 현저하게 감소시키는 경향이 있으며 혈청 내의 총 콜레스테롤 및 중성지방 수준을 낮추어 항비만 효능을 개선시킬 수 있는 가능성을 보여주는 것으로 앞으로 항비만 치료 및 개선제제로서의 잠재력을 가지고 있음을 시사한다.

• 한국재료학회지
• /
• 제31권12호
• /
• pp.727-731
• /
• 2021

In this study, we have investigated a selective emitter using a UV laser on BBr₃ diffusion doping layer. The selective emitter has two regions of high and low doping concentration alternatively and this structure can remove the disadvantages of homogeneous emitter doping. The selective emitters were fabricated by using UV laser of 355 nm on the homogeneous emitters which were formed on n-type Si by BBr₃ diffusion in the furnace and the heavy boron doping regions were formed on the laser regions. In the optimized laser doping process, we are able to achieve a highly concentrated emitter with a surface resistance of up to 43 Ω/□ from 105 ± 6 Ω/□ borosilicate glass (BSG) layer on Si. In order to compare the characteristics and confirm the passivation effect, the annealing is performed after Al₂O₃ deposition using an ALD. After the annealing, the selective emitter shows a better effect than the high concentration doped emitter and a level equivalent to that of the low concentration doped emitter.

• 한국산림과학회지
• /
• 제98권5호
• /
• pp.584-592
• /
• 2009

The objective of this study was to examine the impact of pruning intensity on the vigor and cambial growth of the treated trees, and on the closure of pruning wounds for one year after pruning treatment. Two tree species, Pinus strobus and Acer palmatum, planted broadly in the urban forest of Korea were selected for the experiment. Intensity of pruning, which was estimated by proportion of removed branches, was categorized into five levels with about 10% intervals from lowest 8% up to 46%. Following parameters were examined; cambial electrical resistance (CER) and the cambial growth of trunk at 30 cm above the ground for the years before and after pruning, the cambial growth of stem at 1.5 cm above the branch bark ridge (BBR) of the pruned branch, and closure of pruning wound for one year after pruning. Tree vigor inferred from CER had a tendency to be weakened as pruning intensity increased in P. strobus, while that of A. palmatum was not affected. The trunk growth decreased significantly when the pruning intensity was higher than 30% in both species. The closure of individual pruning wound was related more to the cambial growth of stem at 1.5 cm above BBR than to the pruning intensity. Comparing the closure rate of pruning wound for one year, P. strobus with 72.1% was faster than A. palmatum with 39.3%, which corresponded with the rate of cambial growth of the two species.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.147-151
• /
• 2014

A boron doping process using a boron tri-bromide ($BBr_3$) as a boron source was applied to form a $p^+$ emitter layer on an n-type mono-crystalline CZ substrate. Nitrogen ($N_2$) gas as an additive of the diffusion process was varied in order to study the variations in sheet resistance and the uniformity of doped layer. The flow rate of $N_2$ gas flow was changed in the range 3 slm~10 slm. The sheet resistance uniformity however was found to be variable with the variation of the $N_2$ flow rate. The optimal flow rate for $N_2$ gas was found to be 4 slm, resulting in a sheet resistance value of $50{\Omega}/sq$ and having a uniformity of less than 10%. The process temperature was also varied in order to study its influence on the sheet resistance and minority carrier lifetimes. A higher lifetime value of $1727.72{\mu}s$ was achieved for the emitter having $51.74{\Omega}/sq$ sheet resistances. The thickness of the boron rich layer (BRL) was found to increase with the increase in the process temperature and a decrease in the sheet resistance was observed with the increase in the process temperature. Furthermore, a passivated emitter solar cell (PESC) type solar cell structure comprised of a boron doped emitter and phosphorus doped back surface field (BSF) having Ni/Cu contacts yielding 15.32% efficiency is fabricated.

• 한국전기전자재료학회논문지
• /
• 제28권10호
• /
• pp.665-669
• /
• 2015

We investigated and compared two methods of in-situ oxidation and chemical etching treatment (CET) to remove the boron rich layer (BRL). The BRL is generally formed during boron doping process. It has to be controlled in order not to degrade carrier lifetime and reduce electrical properties. A boron emitter is formed using $BBr_3$ liquid source at $930^{\circ}C$. After that, in-situ oxidation was followed by injecting oxygen of 1,000 sccm into the furnace during ramp down step and compared with CET using a mixture of acid solution for a short time. Then, we analyzed passivation effect by depositing $Al_2O_3$. The results gave a carrier lifetime of $110.9{\mu}s$, an open-circuit voltage ($V_{oc}$) of 635 mV at in-situ oxidation and a carrier lifetime of $188.5{\mu}s$, an $V_{oc}$ of 650 mV at CET. As a result, CET shows better properties than in-situ oxidation because of removing BRL uniformly.

• 대한교통학회지
• /
• 제26권6호
• /
• pp.49-60
• /
• 2008

본 연구의 목표는 음주운전 증거확보용 음주측정에서 혈액과 호흡의 알코올비율의 분산성을 평가하며 호흡 중 알코올 양의 확인 절차를 합리화하는 데 목적을 두고 있다. 이를 위해 각각 남자 24명, 여자 24명 등 48명의 건강한 피험자를 대상으로 성(2), 주류(2;소주, 위스키), 음식물 유형(2;김치지게, 삼겹살), 알코올 섭취량(2; 몸무게 기준 0.35g/kg, 0.70g/kg) 등의 요인에 대해 직교표에 의한 24 요인 설계를 적용한 실험을 실시하였다. 술은 3회에 걸쳐 나누어 마시게 했으며 0.70g/kg 집단은 45분, 0.35g/kg 집단은 30분에 걸쳐 마시게 했다. 호흡측정과 혈액측정은 음주 종료 후 각기 8회와 5회 실시하였다. 그 결과 혈중알코올과 호흡알코올 측정치 간에는 r = 0.973의 높은 상관이 나타났다. 4원 변량분석 결과, 음식물 유형에 있어서 최대 BrAC의 차이(F (1, 43) =5.1, p<.029)가 드러났지만 술의 종류와 성별에 있어서는 차이가 없었다. 전체적인 혈액호흡비(BBR)는 2295${\pm}$403이었고, 95% 신뢰구간은 1489와 3101이었다. 이런 변산에도 불구하고, 호흡측정기에 2100;1의 분배비율을 적용하는 것은 합리적인 것으로 보인다. 그것은 본 연구에서 나타난 바와 같이 적어도 음주 후 30분이 지나면 대부분의 피험자가 2100:1 이상의 비율을 보이기 때문이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.474-474
• /
• 2014

Boron-rich Layer (BRL) 는 결정질 실리콘 태양전지를 제작하는 과정 중 보론 확산 공정 시 형성된다. 본 연구에서는, n-type 실리콘 태양전지에서 BRL의 구조적, 광학적, 전기적 특성을 조사하였다. 보론 에미터는 튜브 형식의 열처리 로에서 $950^{\circ}C$의 온도 하에서 BBr3 액상 소스를 이용하여 형성하였다. BRL은 비정질 상을 보였고, $1023atoms/cm^3$이 넘는 보론 농도를 나타내었다. BRL은 보론, 실리콘, 산소로 구성되었고, 산소는 비정질 상 형성의 원인으로 추정되고 있다. BRL은 1.5~2.0의 굴절률을 나타내었고, $0.8m{\Omega}{\cdot}cm^2$의 접촉 저항을 보였다.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.235.2-235.2
• /
• 2003

To decipher the structure-activity relationships of flavones for the inhibition of cyclooxygenase-2 catalyzed prostaglandin production, we synthesized 7-methxoyflavones, 7-hydroxyflavones, 5-methxoyflavones, 5-hydroxyflavones and flavones without any phenol group on A ring. Methoxyflavones were prepared from 2.6- and 2,4-dihydroxyacetophenones in 3 steps. Most of the methxoyflavones were converted to the corresponding hydroxyflavones by the reaction with BBr3 in good yields. (omitted)

• 산업기술연구
• /
• 제29권B호
• /
• pp.115-119
• /
• 2009

Green fluorescent protein (GFPuv) was displayed on the surface of ethanol-producing bacteria Zymomonas mobilis using N-terminal domain of ice nucleation protein (INP) as an anchoring motif. To evaluate the ice nucleation protein as plausible anchor motif in Z. mobilis, GFPuv gene was subcloned into Zymomonas expression vector yielding pBBR1MCS-3/pPDC/INPN/GFPuv plasmid., INP-GFPuv fusion protein was expressed in Z. mobilis and its fluorescence was verified by confocal microscopy. The successful display of GFPuv on Zymomonas mobilis suggest that INP anchor motif could be used for future fusion partner in Z. mobilis strain improvement.

• Journal of Microbiology and Biotechnology
• /
• 제20권5호
• /
• pp.871-874
• /
• 2010

Many studies require expression analysis of the same gene/promoter across a range of bacterial genera. However, there is currently a lack of availability of reporters based on the broad-host-range IncQ replicon, which is compatible with a popular improved IncP transfer system that is self-transfer defective. We report IncQ lacZ reporter plasmids with features including (1) compatibility with IncP, IncW, and pBHR/pBBR replicons, (2) a variety of antibiotic markers (Sp-r, Sm-r, Km-r, Cm-r), (3) convenient mobilization via a novel self-transfer-defective IncP conjugation system, and (4) GenBank DNA sequences. Utility is demonstrated using three different promoters in different Gram-negative genera.