• Journal of Applied Biological Chemistry
• /
• v.64 no.3
• /
• pp.291-298
• /
• 2021

In this study, we investigated whether the combined administration of berberine (BBR) and silibinin (SBN) was effective in improving hyperlipidemia and anti-obesity efficacy using a high-fat diet (HFD)-fed obese mouse model. HFD-induced obese mice were supplemented with the BBR and SBN combination (BBR-SBN) along with the HFD administration for 8 weeks. During the experiment, body weight, food intake, and levels of total cholesterol, triglyceride and high-density lipoprotein (HDL)-cholesterol were analyzed. Consumption of HFD in the mice caused rapid increases in body weight and the levels of total cholesterol and triglycerides compared to the normal control (NC) group. However, supplementation of BBR-SBN in these obese mice significantly reduced body weight gain and suppressed the levels of total cholesterol and triglyceride with the increment of HDL cholesterol level. In the HFD-fed group, abdominal fat weight was significantly increased and the adipocytes within the epididymal adipose tissue were found to have expanded sizes compared to the NC group. However, in the BBR-SBN group, the sizes of the adipocytes were comparable to those of the NC group and abdominal fat weight was significantly reduced. Moreover, the deposition of giant vesicular fat cells in liver tissues seen in the HFD-fed group was considerably reduced in the BBR-SBN group. These results suggest that the BBR-SBN combination tends to have synergic potential as an anti-obesity agent by significantly reducing body weight gain as well as lowering serum lipid levels and thus improving anti-obesity efficacy in HFD-induced obese mice.

• Korean Journal of Materials Research
• /
• v.31 no.12
• /
• pp.727-731
• /
• 2021

In this study, we have investigated a selective emitter using a UV laser on BBr₃ diffusion doping layer. The selective emitter has two regions of high and low doping concentration alternatively and this structure can remove the disadvantages of homogeneous emitter doping. The selective emitters were fabricated by using UV laser of 355 nm on the homogeneous emitters which were formed on n-type Si by BBr₃ diffusion in the furnace and the heavy boron doping regions were formed on the laser regions. In the optimized laser doping process, we are able to achieve a highly concentrated emitter with a surface resistance of up to 43 Ω/□ from 105 ± 6 Ω/□ borosilicate glass (BSG) layer on Si. In order to compare the characteristics and confirm the passivation effect, the annealing is performed after Al₂O₃ deposition using an ALD. After the annealing, the selective emitter shows a better effect than the high concentration doped emitter and a level equivalent to that of the low concentration doped emitter.

• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.584-592
• /
• 2009

The objective of this study was to examine the impact of pruning intensity on the vigor and cambial growth of the treated trees, and on the closure of pruning wounds for one year after pruning treatment. Two tree species, Pinus strobus and Acer palmatum, planted broadly in the urban forest of Korea were selected for the experiment. Intensity of pruning, which was estimated by proportion of removed branches, was categorized into five levels with about 10% intervals from lowest 8% up to 46%. Following parameters were examined; cambial electrical resistance (CER) and the cambial growth of trunk at 30 cm above the ground for the years before and after pruning, the cambial growth of stem at 1.5 cm above the branch bark ridge (BBR) of the pruned branch, and closure of pruning wound for one year after pruning. Tree vigor inferred from CER had a tendency to be weakened as pruning intensity increased in P. strobus, while that of A. palmatum was not affected. The trunk growth decreased significantly when the pruning intensity was higher than 30% in both species. The closure of individual pruning wound was related more to the cambial growth of stem at 1.5 cm above BBR than to the pruning intensity. Comparing the closure rate of pruning wound for one year, P. strobus with 72.1% was faster than A. palmatum with 39.3%, which corresponded with the rate of cambial growth of the two species.

• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.147-151
• /
• 2014

A boron doping process using a boron tri-bromide ($BBr_3$) as a boron source was applied to form a $p^+$ emitter layer on an n-type mono-crystalline CZ substrate. Nitrogen ($N_2$) gas as an additive of the diffusion process was varied in order to study the variations in sheet resistance and the uniformity of doped layer. The flow rate of $N_2$ gas flow was changed in the range 3 slm~10 slm. The sheet resistance uniformity however was found to be variable with the variation of the $N_2$ flow rate. The optimal flow rate for $N_2$ gas was found to be 4 slm, resulting in a sheet resistance value of $50{\Omega}/sq$ and having a uniformity of less than 10%. The process temperature was also varied in order to study its influence on the sheet resistance and minority carrier lifetimes. A higher lifetime value of $1727.72{\mu}s$ was achieved for the emitter having $51.74{\Omega}/sq$ sheet resistances. The thickness of the boron rich layer (BRL) was found to increase with the increase in the process temperature and a decrease in the sheet resistance was observed with the increase in the process temperature. Furthermore, a passivated emitter solar cell (PESC) type solar cell structure comprised of a boron doped emitter and phosphorus doped back surface field (BSF) having Ni/Cu contacts yielding 15.32% efficiency is fabricated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.10
• /
• pp.665-669
• /
• 2015

We investigated and compared two methods of in-situ oxidation and chemical etching treatment (CET) to remove the boron rich layer (BRL). The BRL is generally formed during boron doping process. It has to be controlled in order not to degrade carrier lifetime and reduce electrical properties. A boron emitter is formed using $BBr_3$ liquid source at $930^{\circ}C$. After that, in-situ oxidation was followed by injecting oxygen of 1,000 sccm into the furnace during ramp down step and compared with CET using a mixture of acid solution for a short time. Then, we analyzed passivation effect by depositing $Al_2O_3$. The results gave a carrier lifetime of $110.9{\mu}s$, an open-circuit voltage ($V_{oc}$) of 635 mV at in-situ oxidation and a carrier lifetime of $188.5{\mu}s$, an $V_{oc}$ of 650 mV at CET. As a result, CET shows better properties than in-situ oxidation because of removing BRL uniformly.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.49-60
• /
• 2008

The aim of this study was to evaluate the variability of the blood.breath ratio (BBR) value and to rationalize the determination of ethanol in breath for evidential sobriety testing. In the experiment forty eight healthy persons, 24 men and 24 women, took part. The experiment included the experimental condition such as sex(2),the type of alcoholic beverage(2; soju, whisky), the type of food(2;kimchi stew, pork belly) and the amount of ethanol consumed(2; 0.35g/kg, 0.70g/kg, based on body weight ) according to 24 factorial design by orthogonal arrays. Breath and blood sample were taken each 8 times and 5 times after the end of drinking. The blood and breath alcohol measurements were highly correlated (r = 0.973). The Results of four way analyses of variance revealed a significant 'the type of food' effect for maximum BrAC (F (1, 43) =5.1, pp<.029), but no significant effect in the type of alcoholic beverage and sex. The overall blood/breath ratio (${\pm}$ SD) was 2295${\pm}$403 and the 95% confidence interval were 1489 and 3101. In spite of these variations, at this time, it seems to be reasonable that apply 2100:1 conversion factor to breathalyzers, because most of the subjects showed the blood.breath ratio of over 2100:1 at least 30 minutes or more passed from the time of drinking as shown in this study.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.474-474
• /
• 2014

Boron-rich Layer (BRL) 는 결정질 실리콘 태양전지를 제작하는 과정 중 보론 확산 공정 시 형성된다. 본 연구에서는, n-type 실리콘 태양전지에서 BRL의 구조적, 광학적, 전기적 특성을 조사하였다. 보론 에미터는 튜브 형식의 열처리 로에서 $950^{\circ}C$의 온도 하에서 BBr3 액상 소스를 이용하여 형성하였다. BRL은 비정질 상을 보였고, $1023atoms/cm^3$이 넘는 보론 농도를 나타내었다. BRL은 보론, 실리콘, 산소로 구성되었고, 산소는 비정질 상 형성의 원인으로 추정되고 있다. BRL은 1.5~2.0의 굴절률을 나타내었고, $0.8m{\Omega}{\cdot}cm^2$의 접촉 저항을 보였다.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.235.2-235.2
• /
• 2003

To decipher the structure-activity relationships of flavones for the inhibition of cyclooxygenase-2 catalyzed prostaglandin production, we synthesized 7-methxoyflavones, 7-hydroxyflavones, 5-methxoyflavones, 5-hydroxyflavones and flavones without any phenol group on A ring. Methoxyflavones were prepared from 2.6- and 2,4-dihydroxyacetophenones in 3 steps. Most of the methxoyflavones were converted to the corresponding hydroxyflavones by the reaction with BBr3 in good yields. (omitted)

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.115-119
• /
• 2009

Green fluorescent protein (GFPuv) was displayed on the surface of ethanol-producing bacteria Zymomonas mobilis using N-terminal domain of ice nucleation protein (INP) as an anchoring motif. To evaluate the ice nucleation protein as plausible anchor motif in Z. mobilis, GFPuv gene was subcloned into Zymomonas expression vector yielding pBBR1MCS-3/pPDC/INPN/GFPuv plasmid., INP-GFPuv fusion protein was expressed in Z. mobilis and its fluorescence was verified by confocal microscopy. The successful display of GFPuv on Zymomonas mobilis suggest that INP anchor motif could be used for future fusion partner in Z. mobilis strain improvement.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.5
• /
• pp.871-874
• /
• 2010

Many studies require expression analysis of the same gene/promoter across a range of bacterial genera. However, there is currently a lack of availability of reporters based on the broad-host-range IncQ replicon, which is compatible with a popular improved IncP transfer system that is self-transfer defective. We report IncQ lacZ reporter plasmids with features including (1) compatibility with IncP, IncW, and pBHR/pBBR replicons, (2) a variety of antibiotic markers (Sp-r, Sm-r, Km-r, Cm-r), (3) convenient mobilization via a novel self-transfer-defective IncP conjugation system, and (4) GenBank DNA sequences. Utility is demonstrated using three different promoters in different Gram-negative genera.