• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.927-933
• /
• 1994

The effect of particle shape and size on the settling characteristics in monodisperse suspensions of non-spherical particles was investigated. The slope index n values which was obtained from the plot of logarithm of settling rate vs. voidage were increased with the decrease of particle size because different amount of liquid could be adsorbed on irregular particle shape and/or size at same volume concentration. From the experimental results, an equation, $n_{i}=n(a+b/d_{v})$ where n is value of spherical particles, dv is minimum particle diameter and a, b are constants for characteristic of particles.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.585-589
• /
• 2012

The characteristics of interface layer and the effect of mole fraction of inlet gas mixture($B_2H_6/H_2/N_2/TiCl_4$) on the microstructure of Ti(B,N) films were studied by microwave plasma hot filament CVD process. Ti(B,N) films were deposited on a substrate(STD-61) to develop a high performance of resistance wear coating tool. Ti(B,N) films were obtained at a gas pressure of 1 torr, bias voltage of 300 V and substrate temperature of $480^{\circ}C$ in $B_2H_6/H_2/N_2/TiCl_4$gas system. It was found that TiN, $TiB_2$, TiB and hexagonal boron nitride(h-BN) phases exist in thin layer on the STD-61.

• Journal of the Korean Statistical Society
• /
• v.12 no.2
• /
• pp.100-109
• /
• 1983

Let ${X_i}$ be a process with stationary and independent increments whose log characteristic function is expressed as $ibut-2^{-1}\sigma^2u^2t+t\int_{{0 }^c}{(exp(iux)-1-iux(i+x^2)^{-1})dv(x)}$. Our main result is taht $x^2(\int_{\y\>x}{dv(y)})/(\int_{$\mid$y$\mid$\leqx}{y^2dv(y)+\sigma^2}) \to 1$ as $x \to 0 (resp. x \to \infty)$ is necessary, and sufficient for ${X-i}$ to have ${A_t}$ and ${B_t}$ such that $(X_t-A_t)/B_t \to^D n(0,1)$ as $t \to 0 (resp. t \to \infty)$.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.79-83
• /
• 2004

We fabricated Bi-2223/Ag superconductor tape with 55 filaments and estimated the magnetic field dependence of critical current (I$_{c}$) and index n (n) up to 30 T at 4.2 K. The I$_{c}$ and n were characterized as a function of external magnetic field parallel to the tape surface on increasing and decreasing field, using a 35 T hybrid magnet. The $I_{c}$ was estimated to be 325 A, and n was 32, 22, and 26 in the electric field range of $0.1 ∼1\mu$V/cm, 1∼10 $\mu$V/cm, and 0.1∼10 $\mu$V/cm, respectively, under self-field at 4.2 K. It was observed that $I_{c}$ was dependent on magnitude of magnetic field and it decreased exponentially as the field increased; in a parallel and increasing field, It was 128 A at 30 T which is approximately 40% of critical current in self-field. In addition, the $I_{c}$ was higher on decreasing field than that on increasing one. On the other hand, n did not significantly depend on field strength up to 30 T, nor varied on whether increasing or decreasing field; n value in 0.1∼1 $\mu$V/cm was 23.0$\pm$5.2 and 27.8$\pm$8.0 on increasing and decreasing field, respectively. The n value on decreasing magnetic field was slightly higher than that on increasing field. This hysteretic behavior of n was similar to that of$ I_{c}$, which is related to the trapped flux at the grain boundary.ary.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.94-98
• /
• 2000

Polycrystalline SBTN ferroelectric thin films were prepared by sol-gel method with various Nb mole ratios on Pt/ $SiO_2$/Si (100) substrates. The films were annealed at different temperatures and characterized in terms of phase and microstructure. Relatively a well saturated hysteresis pattern was obtained at x =0.2 in S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin films. At an applied voltage of 5V, the dielectric constant ($\varepsilon$$_{r}$) and dissipation factor (tan $\delta$) of typical S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin film (x=0.2) were about 236.2 and 0.034. Measured remanent polarization (2Pr) and coercive field (Ec) were 4.28C/c $m_2$, and 38.88kv/cm respectively. No fatigue was observed up to 6$\times$10$_{10}$ switching cycles at 5V and the normalized polarization reduced by a factor of only 4%.%. 4%.%. 4%.%.%.%.%.

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.81-81
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.40-40
• /
• 2004

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.57-62
• /
• 1998

In this paper, tunable transconductor shows good linearity over a wide input voltage range are proposed. The proposed transconductor employ operating in the nonsaturation(ie., linear) region to improve circuit simplicity and tunability and 6.8V$\_$p-p/ wide input range. Also the circuit employ source-coupled differential pair to provide true differential input and can achieve both positive and negative transconductance values. The proposed circuits are implemented using a 1.2 $\mu\textrm{m}$ single poly double metal n-well CMOS technology. The THD characteristic of proposed circuit is less than 1% for a differential input voltage of up to 6V$\^$p-p/ when supply bias condition is V$\_$DD/=-V$\_$ss/=5V, I$\_$B/=20, 40${\mu}$A, and frequency of input signal is 1KHz.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1434-1436
• /
• 2002

The 400KN suspended insulator was fabricated with feldspar, quartz, clay and $Al_2O_3$ wt% for extra high voltage. These materials were grinded with ball milling for 25 hours after mixing them. The grinded materials were sintered at $1300^{\circ}C$ for 50 minutes in the tunnel kiln after mading with jiggering method. The sintered density of specimen was reached at 97% in comparison with that of theory. The specimen had the characteristic of temperature rise with the increase of electrical losses. Also, the flexural strength and the fracture toughness of sintered parts respectively were 1658 kg/$cm^2$ and 2.3 $MPa{\cdot}m^{1/2}$.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1137-1139
• /
• 1998

Effective database is the key to manage automatic distribution system. Currently, automatic distribution system database has been studied with a relational concept. But, it is hard to describe the characteristic of automatic distribution system data which require real time management and composite type. This paper present the way how to design conceptual schema for EMS database using object-oriented concept which is free to decribe composite data type and support inheritance concept.