The dyeing of cotton fabric with Forsythia koreana NAKAI was investigated. The colorant was extracted with methanol under various concentrations of dyestuffs at $40^\circ{C}$ and $76^\circ{C}$. UV-VIS spectrum was obtained to find the maximum wavelength of colorant. Cotton fabrics were dyed at different temperatures, mordants, in pre and post mordanting methods. The maximum wavelength of spectrum were 390nm, 410nm, 440nm. The highest K/S value was showed at 100% dye concentration, extracted at $76^\circ{C}$ and dyed at $80^\circ{C}$. The mordant effect was not good in the K/S values. The light fastness was increased at Fe-pre mordant and Cr, Fe-post mordant.
The aero-industry is union industry which includes a research development type, a knowledge accumulation type and a developed country type. The aero-industry of Korea is in semi-developed type stage but departed later than that of other country such as Taiwan, Indonesia etc. Therefore, the necessity of domestic airplane material is required. This study on 7050Al extruded alloy aims to suggest an adequate heat treatment conditions of T73, T74 and T76. The results of this study show that; 1. The optimum conditions of T7x heat treatment in extruded 7050Al alloy show this; $$T73:121^{\circ}C{\times}7hr+177^{\circ}C{\times}14hr$$. $$T74:121^{\circ}C{\times}7hr+177^{\circ}C{\times}10hr$$. $$T76:121^{\circ}C{\times}7hr+163^{\circ}C{\times}21hr$$. 2. The 2nd step aging heat treatment such as T73, T74 and T76 etc. is efective in 7050Al alloy but the variation otf microstructure and mechanical property with dispersive inclusions produced for extrusion process causes some troubles. Accordingly, in order to produce a good 7050Al alloy, a careful attention is needed in manufacturing process.
Ferromagnetic resonance experiment was performed to study the variations of micromagnetic structure with heat treatment of melt spun $Fe_{76}Cu_{1}Nb_{3}Si_{14}B_{6}$ alloy for 1h at every $50^{\circ}C$ in the temperature range of $400^{\circ}C-700^{\circ}C$. The variations of micromagnetic structure was discussed qualitatively in terms of the variations of line width ${\Delta}H_{p-p}$ and resonance magnetic field $H_{res}$. With increasing armealing temperature to $400^{\circ}C$, ${\Delta}H_{p-p}$ decreases and $H_{res}$ increases due to the decrease in magnetic anisotropy resulting from structural relaxation during heat treatment. With increasing annealing temperature from 400 to $500^{\circ}C$, ${\Delta}H_{p-p}$ increases and $H_{res}$ decreases due to the increase in magnetic anisotropy resulting from the formation of nanocrystalline particles embedded in an amorphous matrix. With increasing armealing temperature from 500 to $550^{\circ}C$, ${\Delta}H_{p-p}$ decreases and $H_{res}$ increases due to the decrease in magnetic anisotropy resulting from the formation of homogeneous nanocrystalline structure with a minor amorphous phase. Further increase in armealing temperature above $550^{\circ}C$ C causes ${\Delta}H_{p-p}$ to increase and $H_{res}$ to decrease due to the increase in magnetic anisotropy due to the formation of inhomogeneous grain structure and intermetallic compounds.
Journal of the Korean Society of Food Science and Nutrition
/
v.22
no.1
/
pp.40-47
/
1993
Gelatinization properties of the air-dried sediment of cowpea were investigated. The water-binding capacity of cowpea flour was drastically increased over the temperature range of 52~55$^{\circ}C$. The percent transmittance of flour suspension was linearly increased at temperature between $65^{\circ}C$ to 75$^{\circ}C$. The gelatinization temperature determined by differential scanning calorimetry was 63.4~76.$0^{\circ}C$. Cowpea flour showed a single-stage of swelling and a low solubility pattern. The minimum moisture content required for the gelatinization was 37.0% . The amylograph peak viscosity was greatly influenced by concentration of the flour, but was not affected by heating temperatures (85~94$^{\circ}C$) at a given concentration. The 20 min height and cold viscosity at 3$0^{\circ}C$ at a fixed concentration was negatively correlated (p<0.05) with heating temperatures.
Kim, Eun-Ho;Son, Hee-Jung;Sung, Nak-Chang;Heo, Jong-Soo;Kim, Hyeong-Seok
Korean Journal of Environmental Agriculture
/
v.16
no.1
/
pp.31-36
/
1997
This study was carried out to analyze the composition of landfill generation gas using vertical pipe wells installed at landfill. The characteristics of composed waste were examined by the open-cut test at H. landfill in Pusan. The waste compositions of landfill layer by Open-cut test indicated that organic matter was average $4.6{\sim}8.78%$ in each landfill. $CH_4$ compositions of gas in each landfill were $49.71{\sim}50.45%$(A-point), $50.39{\sim}53.74%$(B-point), and $58.76{\sim}61.62%(C-point), respectively. The chemical formula of organic matter left in the underground was $C_{36.3}H_{76}O_{30}N_{0.3}S_{0.1}$ Underground temperatures were changed to $18.8{\sim}25.8^{\circ}C$ when the ambient temperature was about $13.4^{\circ}C$. Temperatures with passed times in A, B and C-lysimeter were about $21.1{\sim}22.5^{\circ}C,\;30{\sim}32.5^{\circ}C$ and $35{\sim}38.5^{\circ}C$, respectively. After about 65 day, decomposition rates of organic matter in A, B and C-lysimeter were 9.9%, 14.9% and 22.3%, respectively.
This study was conducted to investigate the pyrolysis products of patchouli oil by Curie-Point pyrolysis. The pyrolysis of patchouli oil was performed at the temperature of 16$0^{\circ}C$, 42$0^{\circ}C$, $650^{\circ}C$, 76$0^{\circ}C$, and 92$0^{\circ}C$ by Curie-Point Pyrolyzer. The pyrolysis products were analyzed by gas chromatography(GC) and mass selective detector(MSD). Total 21 components were identified in the pyrolyzates of patchouli oil. The temperature for maximum formation of most of these compounds was in the range of 76$0^{\circ}C$~92$0^{\circ}C$. The major components were $\beta$-patchoulene, $\alpha$-guaiene, $\beta$-caryophyllene, $\alpha$-patchoulene, seychellene, $\delta$-guaiene, and patchouli alcohol. The numbers of the pyrolyzed products of patchouli oil were increased by increasing temperature, however, the yields of major components such as patchoulene, guaiene, seychellene and patchouli alcohol decreased as the temperature of pyrolysis was raised to 92$0^{\circ}C$, the highest temperature in this experiment. The optimum temperature for formation of the pyrolysis products such as styrene, indane and naphthalene was at 92$0^{\circ}C$.
$Nd_{15}Fe_{77}B_8$ and $Nd_{16}Fe_{76}B_8$ powders were prepared by mechanical alloying in Ar atmosphere, and their phases and magnetic properties were investigated with as a function of the annealing temperature. It was found that the mechanical alloyed $Nd_{16}Fe_{76}B_8$ powder for 450 hours was amorphous phase with a part of $\alpha$-Fe crystallites. The obtained powders at 700 $^{\circ}C$ for 30 minute resulted in two phase of $Nd_2Fe_{14}B$ and $NdB_6$ by the solid-state reaction. The mechanical alloyed $Nd_{16}Fe_{76}B_8$ powder for 450 hour and annealed at 700 $^{\circ}C$ for 30 minute was showed $_iH_c\;of\;9.91\;kOe,\; B_{max}\;of\;12.93\;kG,\;Br\;of\;7.6\;kG\;and\;(BH)_{max}\;10.1\;MGOe$.
To examine the danger of explosion caused by decomposition explosion of Methyl Ethyl Ketone Peroxide, the mini cup pressure vessel tester (MCPVT) was used in the experiment. The maximum explosion pressure increased as the amount of $98\%H_2SO_4$ added to MEKPO increased from $0\%$ to $1\%,\;3\%$, and $5\%$, and the maximum pressure rising velocity increased as well. In addition, the temperature under the pressure at which decomposition starts decreased from $168.16^{\circ}C$ to $126.76^{\circ}C,\;91.21^{\circ}C$, and $81.25^{\circ}C$ as the amount of $H_2SO_4$ added increased.
This study was carried out in the laboratory to clarify effects of different temperature of Protopulvinaria mangiferae(Green) on development, survivorship and reproduction. Developmental period of the mango shieldscale from crawlers to preoviposition adult decreased as temperature increased. The threshold temperature andthermal constants for the development of one generation were 11.7"C and 1000.0 day-degrees, respectively. At25$^{\circ}$C and 30$^{\circ}$C, survival rate from egg to preoviposition adult were 82% and 6096, respectively. Hatchability ofeggs was more than 99% at both condition. The reproductive period overaged 50 days(2SnC) and 33 days(30$^{\circ}$C). After mature adult began to reporduce, and more than 50% of the crawlers emerged during the firsthalf of their life time. The net reproduction rate per generation(R), mean length of a generation0 and intrinsicrate of natural increase(r, ) were higher at 25$^{\circ}$C than at 30"C, and the values measured at 25$^{\circ}$C were 132.6, 76.2 and 0.064/female/day, respectively.
In the present study, the fecundation and fertilization behaviors of the trumpet shell, Charonia fampas sauliae were observed from November 2003 to March 2004. Female has multiple fecundation and multiple fertilization, and the fertilization continued for two days. The fertilized female stayed with the egg mass to protect the eggs, and the fecundation was made during the fertilization. The highest survival rate of egg capsule was 60% at $15^{\circ}C$. Charonia lampas sauliae fed with Chaetoceros calcitrans, Isochysis galbana, and Pavlova lutheri. Growth and survival rates of C. lampas sauliae in the conditions of various water temperature were observed. The highest survival rate was 23% at $15^{\circ}C$ reared for 60 days. The growth was presented in the $15^{\circ}C$ group, with shell length from $408{\pm}21.52{\mu}m\;to\;625{\pm}19.76{\mu}m$ during the experiment.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.