• 제목/요약/키워드: $0.18{\mu}m$ Technology

검색결과 874건 처리시간 0.028초

포도와 포도 가공품에 함유되어 있는 trans-resveratrol의 함량 분석 (Analysis of trans-Resveratrol Contents of Grape and Grape Products Consumed in Korea)

  • 김대중;김상균;김명희;이희봉;이준수
    • 한국식품과학회지
    • /
    • 제35권5호
    • /
    • pp.764-768
    • /
    • 2003
  • 본 연구는 생물학적, 비생물학적인 스트레스에 대한 방어물질중의 한가지인 trans-resveratrol를 포도와 포도가공품(포도주, 포도쥬스)으로부터 분석하는 방법을 확립하였다. trans-Resveratrol 기기분석 조건은 다음과 같다. 분석 column은 Nucleosil 100-5 C18을 사용하였으며 이동상은 acetonitrile: water(40:60, v/v)로서 UV검출기(306 nm)를 이용하여 0.3 mL/min의 유속으로 측정하였다. 분석한 결과, 재현성과 반복성의 CV%는 10%이하였으며, 회수율은 $90{\sim}110%$이었다. 또한, 포도, 포도주 그리고 포도쥬스의 최소검출한계는 14.5 ng/g, 3.62 ng/mL 그리고 4.02 ng/mL이고, 최소정량한계는 14.8 ng/g, 3.69 ng/mL 그리고 4.10 ng/mL이었다. 표준물질인 trans-resveratrol 농도가 $0.048{\sim}2.4\;{\mu}g/mL$일때 $R^2$ 값은 0.999이었다. 32품종의 포도, 9종류의 포도주 그리고 9종류의 포도쥬스 내의 trans-resveratrol 함량은 각각 $0.76{\sim}207.14\;{\mu}g/100\;g$, $5.41{\sim}275.66\;{\mu}g/L$ 그리고 $63.25{\sim}751.55\;{\mu}g/L$로 분석되었다.

Millet 품종별 전분의 이화학적 성질 (Physicochemical Properties of Millet Starch Varieties)

  • 정구민
    • 한국식품과학회지
    • /
    • 제42권1호
    • /
    • pp.115-118
    • /
    • 2010
  • 메조 전분의 청가와 요오드 친화도는 각각 0.304와 4.22%로 일반 메 전분과 비슷하였으나 기장 전분은 각각 0.098과 1.07%로 찰 전분에 가까운 성질을 보였다. 차조와 찰기장 전분의 청가는 각각 0.056과 0.037, 요오드 친화도는 각각 0.49와 0.21%이었다. 전분의 평균중합도는 메조 전분이 1830이었으며, 나머지 세 전분은 3880-4660으로 비슷하였다. 생전분의 알파 아밀라아제 소화율은 찰기장 전분이 제일 커 35.6% 이었으며, 기장 전분이 제일 적어 18.2% 이었다. 전분 입자의 평균 크기는 기장이 $8.25\;{\mu}m$로 제일 작았으며, 나머지 세 전분은 $10.33-11.53\;{\mu}m$이었다. 입자 분포에서도 기장 전분만 $1.9\;{\mu}m$ 이하와 $20.0\;{\mu}m$ 이상의 크기를 갖는 입자가 없어 좁은 분포도를 보였다. 기장 전분의 호화개시온도가 다른 전분보다 $3.5-4.9^{\circ}C$ 높았으며, 최고 점도와 노화정도를 나타내는 Setback 점도는 메조 전분이 제일 컸다. 메조 전분을 제외하고는 12% 농도에서 겔을 형성하지 못하였으며, 25% 농도에서의 겔 강도는 차조, 기장, 찰기장 순이었다.

DC and RF Characteristics of $0.15{\mu}m$ Power Metamorphic HEMTs

  • Shim, Jae-Yeob;Yoon, Hyung-Sup;Kang, Dong-Min;Hong, Ju-Yeon;Lee, Kyung-Ho
    • ETRI Journal
    • /
    • 제27권6호
    • /
    • pp.685-690
    • /
    • 2005
  • DC and RF characteristics of $0.15{\mu}m$ GaAs power metamorphic high electron mobility transistors (MHEMT) have been investigated. The $0.15{\mu}m{\times}100{\mu}m$ MHEMT device shows a drain saturation current of 480 mA/mm, an extrinsic transconductance of 830 mS/mm, and a threshold voltage of -0.65 V. Uniformities of the threshold voltage and the maximum extrinsic transconductance across a 4-inch wafer were 8.3% and 5.1%, respectively. The obtained cut-off frequency and maximum frequency of oscillation are 141 GHz and 243 GHz, respectively. The $8{\times}50{\mu}m$ MHEMT device shows 33.2% power-added efficiency, an 18.1 dB power gain, and a 28.2 mW output power. A very low minimum noise figure of 0.79 dB and an associated gain of 10.56 dB at 26 GHz are obtained for the power MHEMT with an indium content of 53% in the InGaAs channel. This excellent noise characteristic is attributed to the drastic reduction of gate resistance by the T-shaped gate with a wide head and improved device performance. This power MHEMT technology can be used toward 77 GHz band applications.

  • PDF

매몰재의 혼수비가 치관 보철물 변연의 적합성에 미치는 영향에 관한 연구 (A Study on the Marginal Fit of Dental Prosthesis According to the W/P Ratio of Investment)

  • 황경숙
    • 대한치과기공학회지
    • /
    • 제18권1호
    • /
    • pp.67-72
    • /
    • 1996
  • This test is verifying for influence of W/P ratio of investment upon dental prosthesis Firstly we made 40 MOD die and divide 4 groups, each group take 0.2 different w/p ratio grade such as 0.35, 0.37, 0.39 and 0.41. The method of data analysis applied were by ANOVA, Tukey test and Mann-Whiney and Kruskal Wallis test. The finding of this study were as follows : 1. The 0.37 w/p ratio group showed most accurte margin due to $15.8{\mu}m$ gap between margin and die which keep up with manufacture's instruction and 0.35 w/p ratio group was followed as second accuracy group o 새 $48.3{\mu}m$ gap between margin and die, 0.39 w/p ratio group showed $101{\mu}m$ gap and 0.41 w/p ratio group showed $129.8{\mu}m$ gap. 2. As to the relationship of the margin accuracy between 4 different grade of w/p ratio groups, each group was statistically significant(P<0.01). Also the all groups were statistically significant except between 0.35 and 0.37 groups between 0.39 and 0.41 groups, and between 0.35 and 0.39 groups. 3. A consequence of Mann-Whitney & Kruskal-Wallis test for marginal accuracy between 4 different grade of w/p ratio was statistically significant as same as above ANOVA test result. Also Tukey test for verifying similarity from each group showed same as above.

  • PDF

벼 재배 환경 중 molinate의 휘산과 공기 중 고추약해 발현농도 (Volatilization of molinate in paddy rice ecosystem and its concentration in air causing phytotoxicity to chili pepper)

  • 박병준;최주현;김찬섭;임건재;오병렬;심재한
    • 농약과학회지
    • /
    • 제9권1호
    • /
    • pp.70-80
    • /
    • 2005
  • 수도용 제초제 molinate에 대하여 벼 재배환경에서 휘산양상과 공기 중 고추에 대한 약해증상 및 발현 농도설정 시험을 수행한 결과 물 중 휘산양상은 $35^{\circ}C$, 20 L/min에서 47시간 후의 누적 휘산비가 22.7%였고, $25^{\circ}C$, 10 L/min에서는 3.2%로 7배 이상이 차이를 보였다. 벼 재배 포장에 150 g/1,000 $m^2$의 약량으로 살포된 molinate의 공기 중 농도는 지면으로부터 60 cm 높이에서 곡간지와 평야지는 각각 18.17과 11.59 ${\mu}g/m^2$ 수준으로 살포 당일에 최고 휘산량을 보였고, 처리 후 20일에는 $0.18{\sim}0.51{\mu}g/m^3$로 95% 이상이 감소되었으며, 두 지역 모두 휘산 양상은 비슷하였다. 높이 간의 공기 중 molinate 농도는 지표면으로부터 60 cm 높이에서 180 cm높이 보다 2배 이상이 분포되었다. 한편 인근에 재배되고 있는 고추 신엽에서 엽록소가 파괴되면서 잎 표면이 오므라드는 증상이 약제 살포 3일만에 발생하였으며, 약해가 심하게 나타난 잎의 molinate 잔류량은 $0.004{\sim}0.006$ mg/kg 수준으로 검출되었다. 공기 중 molinate에 의한 고추 생육저해는 $6.8{\mu}g/m^3$ 농도에서는 노출 3일째에 약해가 발현되어 4일째는 약해 증상이 심하게 나타났고, $13.6{\mu}g/m^3$ 농도에서는 노출 2일째에 발현되었다. 한편 수경재배에 의한 고추약해는 물 중 $300{\mu}g/L$ 농도에서 10일 후에 약해가 발현되었다. 약해고추의 회복은 신선한 공기가 공급되었을 때 시일이 경과되면서 약해 받은 잎은 고사되어 없어지고 신엽이 새로 발생되어 4주 후에 정상고추와 비슷한 생장을 하였다.

단일구조 지르코니아(zirconia) 전부도재관의 표면처리에 따른 전장도재와의 전단결합강도 (Effect of surface treatments on the shear bond strength of full-contour zirconia layered with porcelain)

  • 최병환;김임선
    • 대한치과기공학회지
    • /
    • 제35권2호
    • /
    • pp.121-126
    • /
    • 2013
  • Purpose: The aim of this research was to investigate difference in shear bond strengths of full-contour zirconia layered with porcelain. Methods: Disk-shaped (diameter: 12.0 mm; height: 3.0 mm) zirconia were randomly divided into six groups according to the surface conditioning method to be applied (N=90, n=15 per group): group 1-contol group(ZC); group 2-airborne particle abrasion with $50-{\mu}m\;Al_2O_3(5A)$; group $3-50-{\mu}m\;Al_2O_3$ + liner(5AL), group $4-110-{\mu}m\;Al_2O_3(1A)$; group $5-110-{\mu}m\;Al_2O_3$ + liner(1AL); group 6-liner(LC). On each block, zirconia porcelain was build up according to manufacturer's instructions. All samples were fixed with measuring jigs and shear bond strength were measured with Universal testing machine. Collected data were analyzed using SPSS(Statistical Package for Social Sciences) Win 12.0 statistics program. Results: LC showed the highest value($29.92{\pm}2.55$ MPa) and ZC showed the lowest value($13.22{\pm}1.37$ MPa). Zirconia liner and Alumina oxide groups was significantly higher shear bond strength than control(p<0.05). 5A (without liner $22.18{\pm}2.37$, with liner $22.84{\pm}1.74$ MPa) was higher shear bond strength than $110{\mu}m$ (without liner $20.18{\pm}2.38$, with $20.71{\pm}2.67$). Conclusion: Surface treatments may have advantage in bond strength improvement for full-contour zirconia layered with porcelain.

0.18㎛ CMOS 3.1Gb/s VCSEL Driver 코아 칩 설계 (Design of Core Chip for 3.1Gb/s VCSEL Driver in 0.18㎛ CMOS)

  • 양충열;이상수
    • 한국통신학회논문지
    • /
    • 제38A권1호
    • /
    • pp.88-95
    • /
    • 2013
  • 본 논문에서는 $0.18{\mu}m$ CMOS 공정 기술을 이용하여 광트랜시버에 사용된 1550 nm 고속 VCSEL을 구동하는 드라이버 회로를 제안한다. 3.1Gb/s 데이터 속도에서 기존 구조에 비하여 향상된 대역폭, 이득 및 아이 다이어그램을 확인하였다. 본 논문에서는 다중채널 어레이 집적모듈을 갖는 광트랜시버에 응용하기 위한 3.1Gb/s VCSEL 드라이버의 설계 및 레이아웃을 확인한다.

Characteristics of PM10, PM2.5 and PM2.5/PM10 Ratio in Air Monitoring Stations in Gyeongnam

  • Park, Jeong-Ho;Suh, Jeong-Min
    • 한국환경과학회지
    • /
    • 제27권10호
    • /
    • pp.925-931
    • /
    • 2018
  • The characteristics of $PM_{10}$, $PM_{2.5}$ and Ratio($PM_{2.5}/PM_{10}$) of 11 urban air monitoring stations in Gyeongnam were analyzed for the last 3 years('15~'17). The average of the all stations was $PM_{10}\;45{\mu}g/m^3$, $PM_{2.5}\;24{\mu}g/m^3$ and Ratio 0.54, and annual reduction rates were $PM_{10}-2.9%$, $PM_{2.5}-2.7%$ and Ratio -1.2%, respectively. The seasonal characteristics of $PM_{10}$ were spring $54{\mu}g/m^3$ > winter $48{\mu}g/m^3$ > summer/autumn $40{\mu}g/m^3$, $PM_{2.5}$ were spring/winter $26{\mu}g/m^3$ > summer 23 > autumn $22{\mu}g/m^3$ and Ratio were summer 0.56 > winter 0.55 > autumn 0.54 > spring 0.51, respectively. The hourly characteristics of $PM_{10}$ were $11{\mu}g/m^3$ higher than 09:00~12:00 at 03:00~06:00, $PM_{2.5}$ were $6{\mu}g/m^3$ higher than 09:00~12:00 at 17:00~18:00 and Ratio were 0.07 higher than 04:00~06:00 at 19:00. By site, the highest concentration of $PM_{10}$ was YJ site $53{\mu}g/m^3$ and $PM_{2.5}$ was HW site $28{\mu}g/m^3$. And Ratio at HD site showed the largest reduction from '15 0.62 to '17 0.52.

LC-MS/MS를 이용한 소변 중 크레아티닌 분석의 측정불확도 평가 (Uncertainty evaluation for the determination of creatinine in urine by LC-MS/MS)

  • 김진영;권운용;서승일;인문교
    • 분석과학
    • /
    • 제25권1호
    • /
    • pp.83-90
    • /
    • 2012
  • 소변 중 크레아티닌의 정상적인 농도범위는 30 - 300 mg/dL로 마약류 감정에 앞서 크레아티닌농도를 측정함으로써 소변 시료의 유효성을 확인하고 있다. 크레아티닌 농도 측정을 위해 액체크로마토그래피-질량분량분석법(LC-MS/MS, liquid chromatography-tandem mass spectrometry)을 사용하였다. 우선 소변 시료를 고속으로 원심분리한 후 10 ${\mu}L$를 분취하여 증류수 390 ${\mu}L$와 혼합하여 희석하였다. 희석된 시료 20 ${\mu}L$에 내부표준물질(5 ${\mu}g/mL$) 30 ${\mu}L$와 acetonitrile 10 ${\mu}L$를 첨가하여 혼합한 후 여과한 시료를 LC-MS/MS에 주입하였다. 크레아티닌은 multi-mode ODS column (Scherzo SM-C18, 75 ${\times}$ 2.0 mm, I.D. 3 ${\mu}m$)을 이용하여 분리하였고, 이동상은 0.2% formic acid와 acetonitrile로 구성되었으며 유속은 150 ${\mu}L$/min으로 하였다. 크레아티닌과 내부표준물질은 [M+H]$^+$ precursor ion과 특징적인 product ion을 한 쌍으로 m/z 114.0${\rightarrow}$ 86.0과 m/z 117.0${\rightarrow}$ 89.1에서 모니터링하여 정량에 적합한 크로마토그램을 얻을 수 있었다. 측정불확도 평가에 앞서 정량분석시 측정값에 영향을 주는 인자들을 찾아내고 각각의 요소들이 측정결과에 어떤 영향을 주는가를 살펴보았다. 시료 희석, 검정 곡선, 재현성, 표준물질의 인자 순으로 측정불확도에 영향을 미치고 있음을 확인하였다. 실제 사람의 소변에서 크레아티닌 농도를 측정한 결과, 측정값에 대한 오차 범위의 상대불확도는 14.2%로 산출되었다.

Evaluation of the Genetic Toxicity of Synthetic Chemicals (IV) - in vitro Chromosomal Aberration Assay with 18 Chemicals in Chinese Hamster Lung Cells -

  • Ryu, Jae-Chun;Kim, Kyung-Ran;Kim, Youn-Jung
    • 한국환경성돌연변이발암원학회지
    • /
    • 제22권3호
    • /
    • pp.149-156
    • /
    • 2002
  • The detection of many synthetic chemicals used in industry that may pose a genetic hazard in our environment is of great concern at present. Since these substances are not limited to the original products, and enter the environment, they have become widespread environmental pollutants, thus leading to a variety of chemicals that possibly threaten the public health. In this respect, to regulate and to evaluate the chemical hazard will be important to environment and human health. The clastogenicity of 18 synthetic chemicals was evaluated in Chinese hamster lung fibroblast cells in vitro. 4-Chloro-3,5-dimethyl phenol (CAS No. 88-04-0) induced chromosomal aberrations with significance at the concentration of 15.7 $\mu\textrm{g}$/$m\ell$ both in the presence and absence of metabolic activation system. Phenoxybenzene (CAS No. 101-84-8) which is one of the most cytotoxic chemical among 18 chemicals tested revealed no clastogenicity in the range of 0.11-0.43 $\mu\textrm{g}$/$m\ell$ both in the presence and absence of metabolic activation system. From the results of chromosomal aberration assay with 18 synthetic chemicals in Chinese hamster lung cells in vitro, 4-chloro-3,5-dimethyl phenol (CAS No. 88-04-0) revealed weak positive clastogenic results in this study.

  • PDF