• 제목/요약/키워드: ${\mu}$-GA

검색결과 945건 처리시간 0.032초

Evaluation of 1.3-㎛ Wavelength VCSELs Grown by Metal Organic Chemical Vapor Deposition for 10 Gb/s Fiber Transmission

  • Park, Chanwook;Lee, Seoung Hun;Jung, Hae Won;An, Shinmo;Lee, El-Hang;Yoo, Byueng-Su;Roh, Jay;Kim, Kyong Hon
    • Journal of the Optical Society of Korea
    • /
    • 제16권3호
    • /
    • pp.313-317
    • /
    • 2012
  • We have evaluated a 1.3 ${\mu}m$ vertical-cavity surface-emitting laser (VCSEL), whose bottom mirror and central active layer were grown by metal organic chemical vapor deposition (MOCVD) and whose top mirror was covered with a dielectric coating, for 10 Gb/s data transmission over single-mode fibers (SMFs). Successful demonstration of error-free transmission of the directly modulated VCSEL signals at data rate of 10 Gb/s over a 10 km-long SMF was achieved for operating temperatures from $20^{\circ}C$ to $60^{\circ}C$ up to bit-error-rate (BER) of $10^{-12}$. The DC bias current and modulation currents are only 7 mA and 6 mA, respectively. The results indicate that the VCSEL is a good low-power consuming optical signal source for 10 GBASE Ethernet applications under controlled environments.

집속이온빔(Focused Ion Beam)에 의한 단결정 다이아몬드 공구의 마이크로/나노스케일 절삭공구 형상 제작 (Fabrication of Micro/nanoscale Cutting Tool Geometry of Single Crystal Diamond Tool by Focused Ion Beam)

  • 백승엽;장성민
    • 한국정밀공학회지
    • /
    • 제31권3호
    • /
    • pp.207-213
    • /
    • 2014
  • A study was carried out to fabricate the cutting tool geometry with micro/nanoscale on the single crystal diamond tool by using the FIB. The FIB technique is an ideal tool for TEM sample preparation that allows for the fabrication of electron-transparent foils. The FIB is appropriate techniques to sample and subsequently define the chemical composition and the structural state of mineral inclusion on the micro/nanoscale. The combination of FIB with a SEM allows for 3D information to be obtained from samples including 3D imaging. Cutting strategies were demonstrated to improve the performance of cutting tool geometry and to generate high aspect ratio micro cutting tool. A finely focused beam of 30keV Ga+ ions was used to mill cutting tool shapes for various micro patterns. Therefore FIB sputtering is used to shape a variety of cutting tools with dimensions in the $1-5{\mu}m$ range and cutting edge radii of curvature of under 50nm.

GIS용 광PT의 전기적 특성에 관한 연구 (A Study on the Electrical Propertis of Optical Potential Transformer for GIS)

  • 이수웅;이성갑;박상만;우형관;원우식;안병립
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1273-1274
    • /
    • 2007
  • In this paper, a Optical Voltage Transformer has been designed and fabricated to improve temperature stability caused by materials properties and insulation in measuring system, using single crystal $Bi_{12}SiO_{20}$ as Pockels effect cells for Gas Insulated Switchgear[GIS] System. LD[wavelength: 850nm] was used as optical source, InGaAs as optical detector to measure optical power, Polarizing Beam Splitter as Polarizer and Analyzer, and Multi-mode Optical-fiber[62.5/$125{\mu}m$] as Light transmission line. OPT was assembled in order to pockels effect, and adopted direct electric field type. The linearity of OPT maintains variation for applied voltage range from 100V - 3000V during the test of electric property, As the temperature was changed from $25^{\circ}C$ to $60^{\circ}C$. the result of this study shows that characteristics of OPT are good, and it can be reflected for practical optical sensors in GIS system.

  • PDF

Hot Wall Epitaxy (HWE) 법에 의한 $CuInTe_2$ 단결정 박막 성장과 가전자대 갈라짐에 대한 광전류연구 (Growth and Characterization of $CuInTe_2$ Single Crystal Thin Films by Hot Wall Epitaxy)

  • 홍광준;박창선
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
    • /
    • pp.156-159
    • /
    • 2003
  • The stochiometric mixture of evaporating materials for the $CuInTe_2$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CuInTe_2$ mixed crystal was deposited on throughly etched GaAs(100) by the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were $610^{\circ}C\;and\;450^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about $0.5{\mu}m/h$. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). From the photocurrent spectra, we have found that values of spin orbit coupling ${\Delta}So$ and crystal field splitting ${\Delta}Cr$ ware $0.283{\underline{3}}eV\;and\;0.120{\underline{0}}eV$, respectively.

  • PDF

$AgInS_2$ 단결정 박막 성장과 광센서 특성 (Growth and Photosensor Properties for $AgInS_2$ Single Crystal Thin Film)

  • 홍광준;백승남
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.134-135
    • /
    • 2006
  • $AgInS_2$ single crystal thin filmsl was deposited on throughly etched semi-insulator GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $680^{\circ}C$ and $410^{\circ}C$ respectively, and the thickness of the single crystal thin films is $6{\mu}m$. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $AgInS_2$ single crystal thin film, we have found that the values of spin orbit coupling ${\Delta}So$ and the crystal field splitting ${\Delta}Cr$ were 0.0098 eV and 0.15 eV at 10 K, respectively. In order to explore the applicability as a photoconductive cell, we measured the sensitivity ($\gamma$), the ratio of photocurrent to darkcurrent (pc/dc), maximum allowable power dissipation (MAPD), spectral response and response time. The result indicated that the samples annealed in S vapour the photoconductive characteristics are best. Therefore we obtained the sensitivity of 0.98, the value of pc/dc of $1.02{\times}10^6$, the MAPD of 312 mW, and the rise and decay time of 10.4ms and 10.8ms respectively.

  • PDF

선택적 분자선 에피택시 방법에 의한 1D-2DEG 혼성 나노선 FET의 구현 (Realization of 1D-2DEG Composite Nanowire FET by Selective Area Molecular Beam Epitaxy)

  • 김윤주;김은홍;서유정;김동호;한철구;;김태근
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.167-168
    • /
    • 2006
  • High quality 3D-heterostructures were constructed by selective area (SA) molecular beam epitaxy (MBE) using a specially patterned GaAs (001) substrate. MBE growth parameters such as substrate temperature, V/III ratio, growth ratio, group V sources ($As_2$, $As_4$) were varied to calibrate the selective area growth conditions. Scanning micro-photoluminescence ($\mu$-PL) measurements and following analysis revealed that the gradually (adiabatically) coupled 2DEG-1D-1DEG field effect transistor (FET) system was realized. This 3D-heterostructure is very promising for the realization of the meso-scopic electronic devices and circuits since it makes it possible to form direct ohmic contact to the (quasi) 1DEG.

  • PDF

Pueraria montana var. lobata Root Extract Inhibits Photoaging on Skin through Nrf2 Pathway

  • Heo, Hee Sun;Han, Ga Eun;Won, Junho;Cho, Yeonoh;Woo, Hyeran;Lee, Jong Hun
    • Journal of Microbiology and Biotechnology
    • /
    • 제29권4호
    • /
    • pp.518-526
    • /
    • 2019
  • Pueraria montana var. lobata is a bioactive substance with various beneficial health effects and has long been extensively used as a traditional medication for the treatment of fever, acute dysentery, diabetes, and cardiovascular diseases in Northeast Asian countries. The purpose of this study was to evaluate the cytoprotective activity of Pueraria montana var. lobata ethanol extract (PLE) for ultraviolet B (UVB)-induced oxidative stress in human dermal fibroblasts (HDF). It was hypothesized that PLE treatment ($25-100{\mu}g/ml$) would reduce intracellular reactive oxygen species (ROS) levels as well as increase collagen production in UVB-irradiated HDF. The results confirmed this theory, with collagen production increasing in the PLE treatment group in a dose-dependent manner. In addition, regulators of cellular ROS accumulation, including HO-1 and NOQ-1, were activated by Nrf2, which was mediated by PLE. Hence, intracellular levels of ROS were also reduced in the PLE treatment group in a dose-dependent manner. In conclusion, PLE increases collagen production and maintains hyaluronic acid (HA) levels in human dermal fibroblasts exposed to UVB-irradiation, thereby inhibiting photoaging.

마찰받침이 있는 지진격리교량의 최적설계 (Optimal Design for Seismically Isolated Bridges with Frictional Bearings)

  • 이계희;유상배;하동호
    • 대한토목학회논문집
    • /
    • 제30권5A호
    • /
    • pp.399-406
    • /
    • 2010
  • 본 논문에서는 내진설계되지 않은 교량의 내진보강에 사용될 수 있는 지진격리장치의 하나인 마찰받침의 설계최적화에 대하여 연구하였다. 강상형교와 콘크리트교에 대하여 El Centro지진파와 인공지진파를 적용하여 마찰받침을 가진 교량구조물의 비선형동적해석을 수행하고 유전자알고리즘을 사용하여 구조물의 응답을 최적화하였다. 이 때 마찰받침의 전단력과 변위를 동시에 고려할 수 있도록 목적함수를 작성하고 전단력과 변위의 가중치를 변화시키면서 최적화를 수행하였다. 그 결과 상대적으로 경량인 강교에서는 전단력에, 상대적으로 중량인 큰 콘크리트교에서는 변위에 큰 가중치를 주는 경우 최적의 응답을 얻을 수 있었다.

저가태양전지에 응용을 위한 용액성장법에 의한 Al-Si층이 코팅된 유리기판상의 다결정 실리콘 박막성장에 관한 연구 (Solution growth of polycrystalline silicon on Al-Si coated borosilicate and quartz glass substrates for low cost solar cell application)

  • 이수홍
    • 한국결정성장학회지
    • /
    • 제4권3호
    • /
    • pp.238-244
    • /
    • 1994
  • 보로실리케이트 유리기판과 석영기판을 사용하여 $800^{\circ}C~520^{\circ}C$의 온도 범위에서 용액 성장법에 의한 다결정 실리콘 박막의 성장에 관해 조사 하였다. 기판상에는 용애과의 젖음성을 좋게 해주기 위해 박막의 알루미늄츠오가 실리콘층이 증착되었으며, 용매로는 알루미늄과 실리콘옥사이드와의 반응에 의해서 일어난다. 결정립 크기가 수백 마이크론까지 이르는 실리콘을 얻을 수 있었으며, 석영기 판의 경우에는 보르실리 케이트 유리기판보다 강한 (111) 우선 성장 방향을 보여주고 있다.

  • PDF

농업관련기업의 빅데이터 수용의도에 미치는 영향: 농업관련기업 종사자 중심으로

  • 류가현;허철무
    • 한국벤처창업학회:학술대회논문집
    • /
    • 한국벤처창업학회 2021년도 추계학술대회
    • /
    • pp.129-134
    • /
    • 2021
  • 농업은 잦은 자연재해, 코로나 같은 예측하기 힘든 불확실성이 높아지는 상황이며 이를 해결하기 위해 새로운 기술적 접근방안과 돌파구 마련이 필요하다. ICT의 급속한 발전과 4차 산업혁명 시대가 도래하면서 데이터의 중요성은 더욱 커지고 있다. 빅데이터는 농업이 직면한 다양한 기술적 난제를 해결함과 동시에 생산,소비,유통 분야의 밸류체인 혁신을 통해 높은 경쟁력을 확보할 수 있게 핵심 요소가 될 것이다. 실제 농업 분야의 해외 사례를 살펴보면 주로 빅데이터에 대한 수집 분석이 기업을 중심으로 이루어지고 있고 기업의 새로운 가치 창출에 중요한 역할을 담당하고 있어 상업적 측면에서 활용가치가 매우 높음을 알 수 있다. 우리나라도 기업의 빅데이터 활용을 위한 다양한 시도가 이루어지고 있으나 아직은 대기업, 소수의 혁신기술 기반 중소기업이 대부분이다. 기업의 빅데이터 활용에 영향을 미치는 연구는 계속 진행되고 있으나, 산업별 특성이 반영되어 결과는 상이하게 나타났다. 또한 대부분의 연구가 조직 차원에서 초기 도입 의도에 영향을 주는 요인 파악에 집중하였다. 반면 기업이 빅데이터를 활용하여 성과를 창출하기 위해서는 각 분야 현업 종사자들의 지속적인 활용 의도에 영향을 미치는 요인에 관한 연구가 필요하다. 따라서 본 연구는 혁신기술 수용 의도를 파악하는데 높은 설명력을 나타내는 통합기술수용이론(UTAUT)과 혁신성향 변수를 활용하여 농업 관련 기업 종사들의 빅데이터 수용 의도에 미치는 영향 요인들을 살펴보고 경제적 혜택과 실용적 혜택의 매개 효과를 분석하고자 한다. 실제 농업 관련 기업 종사자 대상 설문을 통한 실증 연구를 통해 현장 종사자들의 빅데이터 활용 수준을 높이고 우수의 고급 인력을 확보하여 육성하기 위한 방안을 제시하여 농업관련분야 기업의 빅데이터 활성화 정책 도출에 시사점을 제시하고자 한다.

  • PDF