• Journal of the Korea Society of Computer and Information
• /
• v.18 no.1
• /
• pp.149-156
• /
• 2013

In this paper, Commercial program, STAR-CCM+, was used for computer simulation. And also Multi Inner Stage(MIS) cyclone which especially designed for the real experiments of particle removal efficiency. Under negative pressure condition of outlet, computer simulation was performed to predict the removal efficiency for $5{\mu}m$ and $10{\mu}m$ particles by using a turbulence model and lagrangian method. The simulation results are 55.7% and 64.1% for $5{\mu}m$ and $10{\mu}m$ particles, respectively. To compare the simulation results with the actual test of MIS cyclone, we generated the $SiO_2$ particles by heat reactor. Although removal efficiency of actual tests is 63~76% at different flow rate, the size of $SiO_2$ particles which confirmed by SEM(scanning electron microscope) and WAPS(wide range aerosol particle spectrometer) is too small(15~30nm) to compare each results. And so the alternative experiments were performed by using commercial alumina particles ($5{\mu}m$, $10{\mu}m$ and $20{\mu}m$). It was shown that the actual removal efficiency, 76~95%, from MIS cyclone is higher than simulated one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1514-1525
• /
• 1998

Two main characteristics of VBR MPEG video traffic are different statistics according to different picture types and the periodic traffic pattern due to GOP structure. Especially, the I-pictures at the beginning of each GOP generate $$\mu$h more traffic than other pictures. When several VBR Mpeg video sources are superposed, the I-picture starting times of these sources may significantly affect the cell loss characteristics of ATM $$\mu$tiplexers. In this paper, we propse a performance model for ATM $$\mu$tiplexers with VBR MPEG video sources whose starting times are arbitrary given. For analysis, both single and superposed source traffic are modeled as NDPPs (non-deterministic periodic processes), and the ATM $$\mu$tiplexer is modeled as a U-state NDPPD/D/1/B queueing system. It is hown that the numerical results are very close to the si$$\mu$ation results. From the relationships between the starting tiem distributions and the corresponding $$\mu$tiplexer performances, some considerations for designing a scheduling policy in order to obtain the maxi$$\mu$ $$\mu$tiplexing gain are presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.998-1007
• /
• 2015

The $H_{\infty}$ control theory using LMI method is applied to design an attitude controller of radial type satellite that has strongly coupled channels due to the large product of inertia. It is observed that the cross-over frequency of open-loop with $H_{\infty}$ controller is lower than that of open-loop without controller, which is not typical phenomenon in an optimal control design result: it is interpreted that due to a large product of inertia, there is certain limit in increasing agility of satellite by just tuning weighting function. ${\mu}$-analysis is performed to verify the stability and performance robustness with the assumption of +/-5% MOI variation. ${\mu}$-analysis result shows that the variation of principal MOI degrades the stability and performance robustness more than the variation of POI does.

• Korean Journal of Optics and Photonics
• /
• v.30 no.1
• /
• pp.15-22
• /
• 2019

$Si_3N_4$ rib-optical waveguides for evanescent-wave integrated-optical biosensors were analytically interpreted, to derive the single-mode propagation conditions. The integrated-optical biosensor structure based on two-mode interference was proposed, and the rib width and thickness and core thickness for a single-mode and two-mode waveguide (sensing region) were proposed to be $3{\mu}m$, 2 nm, and 150 nm and $3{\mu}m$, 20 nm, and 340 nm respectively. The optical characteristics of each guided-wave mode were investigated utilizing the film mode-matching (FMM) analysis.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.156-164
• /
• 1995

Based on the scalar wave equation of optical fibers, the dispersion characteristics of arbitrarily profiled fibers were analyzed. We used the I-D FEM employing quadratic interpolation fucntions to solve the scalar wave equation. We simulated the DC optical fibers as objects, and searched for the refractive index distribution to minimize the total dispersion. In DC fibers, we found the design parameters for which the total dispersion was almost zero at $\lambda=1.3{\mu}m and 1.55{\mu}m$ simultaneously. We also found the design parameters where the dispersion was flattened, less than 1.0 ps/km.nm for$\lambda=1.4~1.7{\mu}m$1. and the dispersion was as low as 0.65 ps/km.nm at $\lambda=1.55{\mu}m$..

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.101-105
• /
• 2001

본 논문에서는 한전 전력연구원에서 개발한 전력계통 해석용 시뮬레이터(이하 KEPS)를 이용하여 대규모 전력계통을 실시간으로 해석하는 방법 및 그 결과를 제시하고자 한다. KEPS는 캐나다 RTI사에서 개발한 RTDS(Real-Time Digital Simulator)를 근간으로 하는 대규모 디지털 실시간 시뮬레이터로써 총 26랙으로 구성되어 있으며 대규모 전력계통을 $50{\mu}sec{\sim}70{\mu}sec$의 타임스텝으로 계산할 수 있는 전력계통 전자기 과도현상 모의해석 장치이다. 본 논문에서는 KEPS를 이용하여 한전의 2000년 계통을 실시간으로 해석하고, 전력계통 안정화장치 (PSS), 계전기등 외부기기를 실시간으로 해석, 검증한 결과를 소개하기로 한다.

• Journal of Biomedical Engineering Research
• /
• v.22 no.5
• /
• pp.403-412
• /
• 2001

The Present study analyzed the pressure-flow characteristics of a Korean shunt valve. Changes in the characteristic currie depending on the design parameters were also investigated. The Korean shunt valve used in the present study was constant pressure type and our analyses were validated through experiments. We applied fluid-structure interaction to solve the flow dynamic Problem because the small diaphragm in the valve was made from flexible silicone elastomers. Considering the material nonlinearity of the hyper-elastic material. the Mooney-Rivlin approximation was employed. The results of the numerical analyses were close to the experimental results The major Pressure drop was observed to happen in the small diaphragm. The slope of the pressure-flow characteristic curve was computed to be 0.37mm$H_2O$.hr/cc, which was similar to the average value of commercial shunt valves. 0.40mm$H_2O$.hr/cc. Therefore. our valves analyzed in the Present study showed a Proper Pressure control characteristics of the constant pressure type shunt valves. The opening pressure could be controlled by adjusting the amount of predeflection of the valve diaphragm. In order to obtain opening pressures of 25mm$H_2O$ and 80mm$H_2O$, respectively, and the required predeflection was found to be 10.2$\mu$m and 35.3$\mu$m. The flow orifice size was found to be within 10$\mu$m during valve operation Therefore, Precision design and manufacturing techniques are necessary for successful operations of the shunt valve. The study indicated the amount of predeflection as well as the magnitude of corner rounding of the diaphragm edge are important design parameters to influence the slope of the pressure-flow characteristic curve.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.125-134
• /
• 2012

This study examines how the concentration of Fine Particles(PM10: Fine Particles of under Diameter $10{\mu}m$) included in the air influences on the satellite signal transmission frequency band. For the study of satellite signal attenuation rate by the concentration of Fine Particles, the concentration of Fine Particles classified 7 levels, below $50{\mu}g/m^3$, below $100{\mu}g/m^3$, below $200{\mu}g/m^3$, below $400{\mu}g/m^3$, below $800{\mu}g/m^3$, below $1,600{\mu}g/m^3$, below $3,200{\mu}g/m^3$. After then, it analyzed how much each concentration influenced on the satellite signal transmission frequency band.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5A
• /
• pp.849-859
• /
• 2006

This paper presents an extensive robust analysis of a ${\mu}$-controller in the hybrid system for various uncertainties using the benchmark cable-stayed bridge. The overall system robustness may be deteriorated by introducing active devices and the active controller may cause instability due to small margins. Therefore, a ${\mu}$-synthesis method that simultaneously guarantees the performance and stability of the closed-loop system (robust performance) with uncertainties is used for active devices to enhance the robustness in company with the inherent reliability of passive devices. The robustness of the ${\mu}$-synthesis method is investigated with respect to the additional mass on the deck, structural stiffness matrix perturbation, time delay of actuator, and combinations thereof. Numerical simulation results show that the proposed control system has the good robustness without loss of control performances with respect to various uncertainties under earthquakes considered in this study. Furthermore, the control system robustness is more affected by the perturbation of structural stiffness matrix than others considered in this study. Therefore, the hybrid system controlled by a ${\mu}$-synthesis method could be proposed as an improved control strategy for a seismically excited cable-stayed bridge containing many uncertainties.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.392-394
• /
• 2017

In this study, the surface heat transfer coefficient of the 3D model of a thruster regulator in the high temperature and high pressure environment was estimated using the CFD. The thermal barrier coating (TBC) on the surface of the thruster regulator was modeled and the effect of the thickness of the TBC on the temperature of the thruster regulator was investigated. The thickness of the TBC was varied from $100{\mu}m$ to $500{\mu}m$. Results showed that the temperature of the surface and the inside the thruster regulator was lower for the thicker TBS case.