• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.1-1
• /
• 1994

;The electronic state calculations for various types of ceramic materials have beell performed by the use of $DV-X\;{\alpha}$ cluster method. The molecular orbital levels and wave functions for model clusters have been computed to study the electronic properties ami chemical bonding of the ceramics. For ${\beta}-sialon(Si_{6-z}Al_zO_zN_{8-z})$ which is a high temperature structural material based on ${\beta}-Si_3N_4$, we have made model cluster calculations to estimate the strength of chemical bonding between atoms by the Mulliken population analysis. It is found that the covalent bonding between Si and N atoms is very strong in pure ${\beta}-Si_3N_4$, but the covalency around solute atom is considerably weakened when Si atom is substituted by AI. This tendency is enhanced by an additional substitution of oxygen atom for N. The result calculated can well explain the experimental data of changes in mechanical properties such as the reductions of Young's modulus and Vickers hardness with increment of z-value in ${\beta}-sialon$. Various model clusters for transition metal oxides which show many interesting physical and chemical properties have also been calculated. High-valent perovskite-type iron oxides EMFe0_3E(M=Ca and Sr) possess very interesting magnetic and chemical properties. In these oxides, iron exists as $Fe^{4+}$ state, but the experimental measurement of Mossba~er effect suggests that disproportionation $2Fe^{4+}=Fe^{3+}+Fe^{5+}$ takes place for $CaFe0_3$ at low temperatures. The model cluster calculations for these compounds indicated the existence of considerably strong covalent bonding of Fe-O. The calculations of hyperfine interaction at iron neucleus show very good agreement with the experimental Mossbauer measurements. The result calculated also implies that the disproportionation reaction is strongly possible by assuming the quenching of breathing phonon mode at low temperatures.tures.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권3호
• /
• pp.5-8
• /
• 2013

We have studied Hall effect for potassium (K)-doped $BaFe_2As_2$ superconducting thin films by analyzing the relation between the longitudinal resistivity (${\rho}_{xx}$) and the Hall resistivity (${\rho}_{xy}$). The thin films used in this study were fabricated on $Al_2O_3$ (000l) substrates by using an ex-situ pulsed laser deposition (PLD) technique under a high-vacuum condition of ~$10^{-6}$ Torr. The samples showed the high superconducting transition temperatures ($T_c$) of ~ 40 K. The ${\rho}_{xx}$ and the ${\rho}_{xy}$ for K-doped $BaFe_2As_2$ thin films were measured by using a physical property measurement system (PPMS) with a temperature sweep (T-sweep) mode at an applied current density of $100A/cm^2$ and at magnetic fields from 0 up to 9 T. We report the T-sweep results of the ${\rho}_{xx}$and the ${\rho}_{xy}$ to investigate Hall scaling behavior on the basis of the relation of ${\rho}_{xy}={A{\rho}_{xx}}^{\beta}$. The ${\beta}$ values are $3.0{\pm}0.2$ in the c-axis-oriented K-doped $BaFe_2As_2$ thin films, whereas the thin films with various oriented-directions like a polycrystal showed slightly lower ${\beta}$ than that of c-axis-oriented thin films. Interestingly, the ${\beta}$ value is decreased with increasing magnetic fields.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1228-1229
• /
• 2008

The composites were fabricated 61[vol.%] ${\beta}$-SiC and 39[vol.%] $TiB_2$ powders with the liquid forming additives of 12[wt%] $Al_2O_3+Y_2O_3$ as a sintering aid by pressure or pressureless annealing at 1,650[$^{\circ}C$] for 4 hours. Reactions between SiC and transition metal $TiB_2$ were not observed in the microstructure and the phase analysis of the SiC-$TiB_2$ electroconductive ceramic composites. Phase analysis of SiC-$TiB_2$ composites by XRD revealed mostly of ${\alpha}$-SiC(6H), $TiB_2$, and In Situ $YAG(Al_5Y_3O_{12})$. The relative density, the flexural strength and the Young's modulus showed the highest value of 88.32[%], 136.43[MPa] and 52.82[GPa] for pressure annealed SiC-$TiB_2$ composites at room temperature. The electrical resistivity showed the lowest value of 0.0162[${\Omega}{\cdot}cm$] for pressure annealed SiC-$TiB_2$ composite at 25[$^{\circ}C$]. The electrical resistivity of the pressure annealed SiC-$TiB_2$ composite was positive temperature coefficient resistance (PTCR) but the electrical resistivity of the pressureless annealed SiC-$TiB_2$ composites was negative temperature coefficient resistance(NTCR) in the temperature ranges from 25[$^{\circ}C$] to 700[$^{\circ}C$].

• 한국토양비료학회지
• /
• 제21권2호
• /
• pp.129-134
• /
• 1988

토양(土壤)으로부터 분리(分離)한 Streptomyces sp. S-45 균주(菌株)의 효소학적(酵素學的) 성질(性質)을 검토(檢討)한 결과(結果)는 다음과 같다. 1. 분리균(分離菌) Streptomyces sp. S-45의 Chitinase activity는 $3.01({\mu}/m{\ell})$이고 ${\beta}$-1.3-Glucanase activity는 $2.49({\mu}/m{\ell})$이었다. 2. 탄소원(炭素原)으로서 Colloidal chitin 0.7%, Glucose 0.3%, 질소원(窒素原)으로서 Asparagine 0.5%, Peptone 0.2% 존재(存在)가 효소생산(酵素生産)에 효과적(效果的)이었다. 3. 최적(最適) 효소생성(酵素生成) 조건(條件)으로 pH 7.0, $30^{\circ}C$에서 6일간(日間) 진탕배양시(培養時) 최고(最高)의 효소생성(酵素生成)을 나타내었다. 4. 효소(酵素)의 활성(活性)에 미치는 최적(最適) 작용조건(作用條件)은 pH 6.5~7.0, 온도(溫度)는 $45{\sim}50^{\circ}C$였다. 5. 본(本) 효소(酵素)는 pH6.0~7.0에서 안정성(安定性)이 가장 높았고, $80^{\circ}C$로 10분(分) 처리시(處理時) Chitinase는 10%, ${\beta}$-1.3-Glucanase는 12%로 잔존활성(殘存活性)이 감소(減少)하였다. 6. 금속(金屬)이온에 대한 효소(酵素)의 영향(影響)은 $Co^{{+}{+}}$, $Cu^{{+}{+}}$, $Mn^{{+}{+}}$, $Al^{{+}{+}{+}}$의 $10^{-2}M$과 $Sn^{{+}{+}}\;10^{-3}M$에서 활성(活性)이 증대(增大)하였고, $Ag^{{+}{+}}$, $Hg^{{+}{+}}$는 현저(顯著)한 저해작용을 하였다.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• 고문화
• /
• 60호
• /
• pp.101-120
• /
• 2002

고대건축에 있어 중요부재로 사용되었던 전돌은 의장이 화려하고 섬세하여 통일신라시대에는 당${\cdot}$일본의 수준을 훨씬 능가하였다. 이 중 녹유전은 그 사용례가 특별한 건축물에 한정하여 사용하였으며 남겨진 자료 또한 소량일 뿐만 아니라, 현재까계 녹유전과 관련된 연구는 거의 이루어지지 않고 있어 분석을 시도하여 보았다. 조사된 녹유전은 통일신라시대의 가장 대표적인 포항 법광사지 출토 녹유전이다. 녹유전의 성분분석은 미소부X선회절분석기, 유도결합플라르마발광분석기, 미소부형광X선분석기, 열중량/시차별분석기/열이온화질량분석기의 방법으로 이루어졌다. 현미경관찰 결과, 단면구조는 대부분이 석영, 장석이며 주변에서 쉽게 관찰할 수 있는 보통의 점토입자로 구성되어 있었다. 태토의 성분 분석예는 거의 없음으로 기존에 조사 발표된 경주 및 장도 출토 토기와 비교하여 시 Al2O3와 Fe2O3가 조금 낮고 SiO2 성분이 더 높게 분석되었다. 또한 녹유의 성분분석 결과, PbO $70.2wt\%$를 함유한 순수한 납 유리질이었다. 전돌의 소성온도는 TG/DTA를 통해 $573^{\circ}C$에서의 흡열피크$(\alpha-quartz\rightarrow\beta-quartz)$와 $870^{\circ}C$에서 석영의 상전이$(\beta-quartz{\rightarrow}tridymite)$에 따른 발열피크가 관찰되었다. 이는 $900^{\circ}C$ 이전에는 특이한 열적 변화가 없고 이 온도 범위 이상에서 변화가 일어났다는 것을 의미하므로 $900^{\circ}C$ 이하에서 소성된 것이라 사료된다. XRD를 이용한 광물분석에서는 전형적인 점토광물인 quartz와 feldspar, muscovite peak가 동정되고, 고온 소성시 보여지는 tridymite, mullite와 cristobalite peak가 동정되지 않은 것으로 석영의 결정구조 변화에 따른 소성온도 추정으로 보아 $900^{\circ}C$ 이하의 저온소성으로 볼 수 있다. 전돌 녹유의 납동위원소비 분석결과는 한국중남-남부광산연과 일치하고 있으며, 따라서 포항 법광사지의 녹유전돌의 제작산지는 한반도 남부의 원료를 사용하여 제작했음을 추정할 수 있다.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1602-1608
• /
• 2007

The composites were fabricated, respectively, using 61[vol.%] SiC-39[vol.%] $TiB_2$ and using 61[vol.%] SiC-39[vol.%] $ZrB_2$ powders with the liquid forming additives of 12[wt%] $Al_2O_3+Y_2O_3$ by hot pressing annealing at $1650[^{\circ}C]$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H, 3C), $TiB_2$, $ZrB_2$ and $YAG(Al_5Y_3O_{12})$ crystal phase on the Liquid-Phase-Sintered(LPS) $SiC-TiB_2$, and $SiC-ZrB_2$ composite. $\beta\rightarrow\alpha-SiC$ phase transformation was occurred on the $SiC-TiB_2$ and $SiC-ZrB_2$ composite. The relative density, the flexural strength and Young's modulus showed the highest value of 98.57[%], 249.42[MPa] and 91.64[GPa] in $SiC-ZrB_2$ composite at room temperature respectively. The electrical resistivity showed the lowest value of $7.96{\times}10^{-4}[\Omega{\cdot}cm]$ for $SiC-ZrB_2$ composite at $25[^{\circ}C]$. The electrical resistivity of the $SiC-TiB_2$ and $SiC-ZrB_2$ composite was all positive temperature coefficient resistance (PTCR) in the temperature ranges from $25[^{\circ}C]$ to $700[^{\circ}C]$. The resistance temperature coefficient of composite showed the lowest value of $1.319\times10^{-3}/[^{\circ}C]$ for $SiC-ZrB_2$ composite in the temperature ranges from $100[^{\circ}C]$ to $300[^{\circ}C]$ Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of SiC-based electroconductive ceramic composites.

• 한국광학회지
• /
• 제20권4호
• /
• pp.201-206
• /
• 2009

본 연구에서는 무기섬광체와 광섬유를 이용하여 삼중수소 검출용 광섬유 방사선 센서를 제작하였다. 무기섬광체 선택을 위해 $Gd_2O_2S$ : Tb, $Y_3Al_5O_{12}$ : Ce, CsI : Tl을 이용하여 센서팁을 제작한 후, 금속 수소화물 형태의 삼중수소를 이용하여 섬광효율이 가장 좋은 섬광체를 선별하였다. 또한 선정된 섬광체를 사용하여 제작한 센서를 이용하여 삼중수소 선원으로부터 거리에 따른 섬광량을 계측하였고 선원의 방사능 세기에 따른 섬광량을 측정하여 표면 방사능 모니터의 결과와 비교 분석하였다.

• 한국전기전자재료학회논문지
• /
• 제33권5호
• /
• pp.427-431
• /
• 2020

In this research, we evaluated the electrical properties of polycrystalline-gallium-oxIde (Ga₂O₃) thin films grown by mist-CVD. A 500~800 nm-thick Ga₂O₃ film was used as a channel in a fabricated bottom-gate MOSFET device. The phase stability of the β-phase Ga₂O₃ layer was enhanced by an annealing treatment. A Ti/Al metal stack served as source and drain electrodes. Maximum drain current (I_D) exceeded 1 mA at a drain voltage (V_D) of 20 V. Electron mobility of the β-Ga₂O₃ channel was determined from maximum transconductance (g_m), as approximately, 1.39 ㎠/Vs. Reasonable device characteristics were demonstrated, from measurement of drain current-gate voltage, for mist-CVD-grown Ga₂O₃ thin films.

• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.354-357
• /
• 2007

The nitriding and post-sintering behavior of silicon powder compact containing sintering additives of 2.3 wt% and 7 wt% were investigated in this study. Regardless of the liquid phase content, elongated large grains of a typical morphology evolved in the post-sintered specimens. Phase analysis revealed a complete phase transformation into ${\beta}-Si_3N_4$ in both porous systems. Oxynitride second phases (mellilite) precipitated in the latter, while those were free in the former containing less amount of liquid phase. The post-sintering condition that yielded a favorable microstructure for a filter application was achieved when the specimens were soaked at $1800^{\circ}C$ for 2 h. It was found that the thermal conductivity of porous $Si_3N_4$ ceramics is dominated by the porosity more than this factor is influenced by the addition of $Al_2O_3$.