• Elastomers and Composites
• /
• v.31 no.2
• /
• pp.122-129
• /
• 1996

The Thermal decomposition of the ${\alpha}-Cellulose$ and NaCl was studied using a thermal analysis technique in the steam of nitrogen gas with 30ml/min at various heating ranges from 4 to $20^{\circ}C/min$. The Derivative and Integral method used to be obtained values of activation energy of decomposition reaction. 1. The values of activation energy evaluated by Derivative and Intergral method were consistent with each other very well. 2. The maximum value of heat of decomposition evalated by DSC method was ${\alpha}-Cellulose/NaCl= 90/10$. 3. The thermogravimetric trace curve agreed with the theoretical equation.

• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.558-566
• /
• 2009

Time-dependent behavior is a basic mechanical property of rocks. Predicting the failure time of rock structures by analyzing the time-dependent characteristic is important and problematic. It is tried to predict the failure time of tunnel, slope & laboratory creep test specimen from measured displacement(or strain) and rate with relationship suggested by Voight($\ddot{\Omega}=A\dot{\Omega}^\alpha$, where $\Omega$ is a measurable quantity such as strain & displacement and A & $\alpha$ are constants). A & $\alpha$ are estimated through applying the nonlinear least square method to the single and double integrated Voight's equations and utilized to predict the failure time. Predicted failure time is in accordance with real one except minor error. Linear inverse rate method applied to creep strain and rate yields a poor linear correlation of data and precision of predicted failure time is not better than methods using strain and rate.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.1
• /
• pp.139-144
• /
• 2008

Generally, real system that is the object of decision-making is very variable and sometimes it lies situations with uncertainty. To solve these problem, it has used statistical methods as significance level, certainty factor, sensitivity analysis and so on. In this paper, we propose a method for fuzzy decision-making based on MFAC(Multiple Fuzzy Alpha Cut) to improve the definiteness of classification results with similarity evaluation. In the proposed method, MFAC is used for extracting multiple a ${\alpha}$-level with proximity degree at proximity relation between relative Hamming distance and max-min method and for minimizing the number of data which are associated with the partition intervals extracted by MFAC. To determine final alternative of decision-making, we compute the weighted value between extracted data by MFAC From the experimental results, we can see the fact that the proposed method is simpler and more definite than classification performance of the conventional methods and determines an alternative efficiently for decision-maker by testing significance of sample data through statistical method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.703-709
• /
• 2017

Creep analysis takes much more time than elastic or elastic-plastic analysis. In this study, we conducted elastic and elastic-plastic analysis and compared the results with creep analysis results. In the elastic analysis, we used primary stress, which can be classified by the $M{\alpha}-tangent$ method and stress intensities recommended in the ASME code. In the elastic-plastic analysis, we calculated the parameters recommended in the R5 code. For the FE models, a bending load, uniaxial load, and biaxial load were applied to the cross shaped welded plate, and a bending load and internal pressure were applied to the elbow pipe. To investigate the element size sensitivity, we conducted FE analysis for various element sizes for the cases where bending load was applied to the cross shaped welded plate. There was no significant difference between the creep stress and the alternative methods; however, in the $M{\alpha}-tangent$ method, the results were affected by the element size.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.2
• /
• pp.661-677
• /
• 2015

In this paper, we consider the following Kirchhoff-type Schr$\ddot{o}$dinger system $$\{-\(a_1+b_1{\int}_{\mathbb{R^3}}{\mid}{\nabla}u{\mid}^2dx\){\Delta}u+{\gamma}V(x)u=\frac{2{\alpha}}{{\alpha}+{\beta}}{\mid}u{\mid}^{\alpha-2}u{\mid}v{\mid}^{\beta}\;in\;\mathbb{R}^3,\\-\(a_2+b_2{\int}_{\mathbb{R^3}}{\mid}{\nabla}v{\mid}^2dx\){\Delta}v+{\gamma}W(x)v=\frac{2{\beta}}{{\alpha}+{\beta}}{\mid}u{\mid}^{\alpha}{\mid}v{\mid}^{\beta-2}v\;in\;\mathbb{R}^3,\\u,v{\in}H^1(\mathbb{R}^3),$$ where $a_i$ and $b_i$ are positive constants for i = 1, 2, ${\gamma}$ > 0 is a parameter, V (x) and W(x) are nonnegative continuous potential functions. By applying the Nehari manifold method and the concentration-compactness principle, we obtain the existence and concentration of ground state solutions when the parameter ${\gamma}$ is sufficiently large.

• BMB Reports
• /
• v.33 no.4
• /
• pp.353-357
• /
• 2000

A new assay method of ${\alpha}-Oxidase$ (fatty acid : oxygen dioxygenase, 1-decarboxylating) was developed using a bioluminescence reaction system of marine luminous bacterium, Photobacterium phosphoreum. ${\alpha}$-Oxidase was isolated from a cucumber (Cucumis sativus). Pentadecanoic acid was used as a substrate, and the product, tetradecanal, was analyzed with a bacterial luciferase-coupled reaction. Initial light intensity was directly related to the concentration of tetradecanal in the range of 1 nM to 10 ${\mu}M$. Optimal pH and temperature were 7.5 and $25^{\circ}C$, respectively. Optimal pentadecanoic acid concentration in a standard assay of ${\alpha}$-oxidase was 0.1 mM. The Km value of pentedecanoic acid was $85{\mu}M$. This method is straightforward, rapid, convenient, and easy. Its needs no treatment or extraction of reaction mixture.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.292-298
• /
• 1998

${\alpha}-Fe_2O_3$films were prepared by a dip-coating method using the mixed solution of ferric nitrate, ethylene glycol and acethyl acetone. The polymerization effect of the mixed solution was studied by FT-IR spectroscopic analysis, and the decomposition of organic parts and crystallization of the dip-coated film were investigated by FT-IR, XRD and DSC. In addition, AFM and SEM were employed to analyze the surface roughness and the thickness of ${\alpha}-Fe_2O_3$films.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.239-244
• /
• 1998

Iron complexes were prepared using ferric nitrate and ethylene glycol as starting materials and the ul-trafine ${\alpha}-Fe_2O_3$ particles with the sizes smaller than 200nm were obtained by the pyrolysis of iron com-plexes at over $350^{\circ}C$ In addition the decomposition mechanism of the synthesized iron complexes was in-vestigated by differential scanning calorimeter X-ray diffractometer and IR spectrometer. Transmission electron microscopy and BET method were performed to analyze the effects of ferric nitrate contents and reaction temperatures on the size and shape of the particles.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.662-665
• /
• 2001

As the fuzzy control is applied to servo system the hardware implementation of the fuzzy information systems requires the high speed operations, short real time control and the small size systems. The aims of this study is to develop hardware of the fuzzy information systems to be apply to servo system. In this paper, we propose a calculation method of approximate reasoning for fuzzy control based on $\alpha$-level set decomposition of fuzzy sets by quantize $\alpha$-cuts. This method can be easily implemented with analog hardware. The influence of quantization levels of $\alpha$-cuts on output from fuzzy inference engine is investigated. It is concluded that 4 quantization levels give sufficient result for fuzzy control performance of do servo system. It examined useful with experiment for dc servo system.

• Korean Journal of Microbiology
• /
• v.43 no.3
• /
• pp.210-216
• /
• 2007

The principal objective of this study was to analyze 16S rDNA-ARDRA of the humus forest soil via an improved manual method and an ISOIL kit on the basis of the UPGMA clustering of the 16S rDNA combined profile, 44 ARDRA clusters of 76 clones via the ISOIL kit method and 45 ARDRA clusters of 136 clones via the improved manual method. On the basis of the 16S rDNA sequences, 44 clones from the ARDRA clusters by the ISOIL kit were classified into 3 phyla : ${\alpha}-,\;{\beta}-,\;{\gamma}-,\;{\delta}-Proteobacteria$, Acidobacteria and Actinobacteria. Using the improved manual method, the specimens were classified into 6 phyla : the ${\alpha}-,\;{\beta}-,\;{\gamma}-,\;{\delta}-Proteobacteria$, Acidobacteria, Bacteroides, Verrucomicrobia, Planctomycetes and Gemmatomonadetes. As a result, the modified manual method indicated greater phylogenetic diversity than was detected by the ISOIL kit. Approximately 40 percent of the total clones were identified as ${\alpha}-Proteobacteria$ and 30 percent of the total clones were ${\gamma}-Proteobacteria$ and assigned to dominant phylogenetic groups using the ISOIL kit. Using the modified manual method, 41 percent of the total clones were identified as Acidobacteria and 28 percent of total clones were identified as ${\alpha}-proteobacteria$ and assigned to dominant phylogenetic groups.