• 한국분말재료학회지
• /
• 제12권5호
• /
• pp.325-331
• /
• 2005

Implant prototypes with various porosities were fabricated by electro-discharge-sintering of atomized spherical Ti-6Al-4V powders. Single pulse of 0.75 to 2.0 kJ/0.7 g-powder, using 150, 300, and $450{\mu}F$ capacitors was applied to produce a fully porous and porous surfaced implant compact. The solid core formed in the center of the compact after discharge was composed of acicular ${\alpha}+{\beta}$ grains and porous layer consisted of particles connected in three dimensions by necks. The solid core and neck sizes increased with an increase in input energy and capacitance. On the other hand, pore volume decreased with increased capacitance and input energy due to the formation of solid core. Capacitance and input energy are the only controllable discharge parameters even though the heat generated during a discharge is the unique parameter that determines the porosity of compact. It is known that electro-discharge-sintering of spherical Ti-6Al-4V powders can efficiently produce fully-porous and porous surfaced Ti-6Al-4V implants with various porosities in a short time less then 400 isec by manipulating the discharging condition such as input energy and capacitance including powder size.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권8호
• /
• pp.1190-1195
• /
• 2007

This study was conducted to improve efficiency of a follicle culture system without reducing developmental competence of intrafollicular oocytes. Preantral follicles (100 to $125{\mu}m$ in diameter) of F1 hybrid (B6CBAF1) mice were cultured singly for 216 h in modified ${\alpha}$-MEM-glutamax medium, to which 2.5 IU/ml hCG and epidermal growth factor was added 16 h prior to the end of culture. Medium change was either performed three times (54 h interval), twice (72 h interval), once (108 h interval), or not at all (216 h interval). Maturation (progression to the metaphase II stage) of intrafollicular oocytes was detected from 4 days after culture in the three-times change treatment, while all treatments yielded mature oocytes from day 5 of culture. Compared with the three-times change, decreasing the change frequency to once did not reduce the capacity to begin maturation (germinal vesicle breakdown of 82 to 86%), to mature (78 to 79%) and to develop into blastocysts after parthenogenetic activation (29 to 32%). Morphological parameters were similar among these treatments. Except for the no medium change treatment, similar colony-forming activity of inner cell mass cells after culturing of blastocysts in leukemia inhibitory factor-containing medium was detected, while the morphology of the colony-forming cells deteriorated in the change-once treatment compared with the change twice or three-times. In conclusion, the efficiency of the preantral follicle culture system could be improved by reducing frequency of medium change up to a 72 h interval (three times in total 216 h culture) without decreasing developmental competence of oocytes.

• Archives of Pharmacal Research
• /
• 제24권6호
• /
• pp.568-571
• /
• 2001

The purpose of this work was to study the effect of storage time and temperature on the in vitro release kinetics of a commercial sustained-release dosage form of theophylline, at different pHs of the dissolution medium. The formulation was stored at $35^{\circ}C$ for 16 months and at $45^{\circ}C$ for 8 months, with a relative humidity of 60%. The in vitro release tests were performed at pHs 2, 4, 6 and 7.4. The mean values of the transport coefficient n, were close to 0.5 in all the conditions tested, which indicates that the transport system is not modified after storage of the formulation at $35^{\circ}C$ and $45^{\circ}C$. The mean values of the dissolution rate constant ranged from 0.036 to 0.043 $min^{-n}$, under all the conditions tested. Significant differences (${\alpha}=0.05$) were found between pHs 2, 4 and 6, 7.4 for all the model-independent parameters studied. When the formulation was kept at $35^{\circ}C$ for 16 months, the mean percentage of drug dissolved at 8 hours was 25.61% (pHs 2, 4) and, 36.12% (pHs 6, 7.4), representing a 26% and 24% reduction, respectively. Simitar results were obtained after storing the formulation at $45^{\circ}C$ for 8 months, corresponding to 33.3% (pHs 2, 4) and, 22.5% (pHs 6, 7.4) diminution, respectively. The values of the similarity factory $f_2$, obtained were lower than 50, which indicates the lack of similarity among the dissolution profiles, after storing the formulation under the experimental Conditions tested.

• 미생물학회지
• /
• 제36권2호
• /
• pp.130-135
• /
• 2000

순천만 갯벌의 3개 지점의 표층(5cm)과 심층(20 cm)토양의 물리화학적 요인과 종속영양세균의 분포, 섬유소 분해율과 체외효소의 활성을 측정하였다. 온도, 수분함량, 인산염 인 그리고 유기물함량은 각각 -1~$30^{\circ}C$, 42.1~53.1%, 0.0779~0.1961mg/g, 그리고 1.99~7.64%로 나타나었다. 섬유소 films의 분해율은 7.7%~100%/month 범위로 1~2월에 최저 그리고 8~9월에 최고의 분해율을 나타냈다. 종속영양세균의 분포는 $0.87{\times}10^6 ~ 3.6{\times}10^7 $CUFs/g dry soil의 범위에 속해Tdmu 심층의 경우 표층에 비해 낮았다. MUF-기질의 분해율로 측정한 phoshatase, $\alpha$-D-gluocosidase, $\beta$-D-glucosidase, cellobiohydrolase 활성의 변화는 각각 152.23~1779.80 nMi/hr 2.67~202.18 nM/hr, 5.03~258.26 nM/hr, 3.42~63.07 nM/hr으로 모두 하계에 상대적으로 높은 값을 나타내었다. 섬유소 분해는 수온상승이 주된 요인이었으며, 정점간, 깊이간 큰 차이는 나타나지 않았다. 체외효소의 활성은 온도 및 섬유소 분해율과 높은 양의 상관관계를 나타냈다. 종속영양세균의 분포는 섬유소 분해와 체외효소의 활성과 높은 상괸은 나타나지 않았다.

• Restorative Dentistry and Endodontics
• /
• 제42권3호
• /
• pp.206-215
• /
• 2017

Objectives: To determine the combined effect of fatigue cyclic loading and thermocycling (CLTC) on the shear bond strength (SBS) of a resin cement to zirconia surfaces that were previously air-abraded with aluminum oxide ($Al_2O_3$) particles at different pressures. Materials and Methods: Seventy-two cuboid zirconia specimens were prepared and randomly assigned to 3 groups according to the air-abrasion pressures (1, 2, and 2.8 bar), and each group was further divided into 2 groups depending on aging parameters (n = 12). Panavia F 2.0 was placed on pre-conditioned zirconia surfaces, and SBS testing was performed either after 24 hours or 10,000 fatigue cycles (cyclic loading) and 5,000 thermocycles. Non-contact profilometry was used to measure surface roughness. Failure modes were evaluated under optical and scanning electron microscopy. The data were analyzed using 2-way analysis of variance and ${\chi}^2$ tests (${\alpha}=0.05$). Results: The 2.8 bar group showed significantly higher surface roughness compared to the 1 bar group (p < 0.05). The interaction between pressure and time/cycling was not significant on SBS, and pressure did not have a significant effect either. SBS was significantly higher (p = 0.006) for 24 hours storage compared to CLTC. The 2 bar-CLTC group presented significantly higher percentage of pre-test failure during fatigue compared to the other groups. Mixed-failure mode was more frequent than adhesive failure. Conclusions: CLTC significantly decreased the SBS values regardless of the air-abrasion pressure used.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.363-363
• /
• 2008

The development of dry etching process for sapphire wafer with plasma has been key issues for the opto-electric devices. The challenges are increasing control and obtaining low plasma induced-damage because an unwanted scattering of radiation is caused by the spatial disorder of pattern and variation of surface roughness. The plasma-induced damages during plasma etching process can be classified as impurity contamination of residual etch products or bonding disruption in lattice due to charged particle bombardment. Therefor, fine pattern technology with low damaged etching process and high etch rate are urgently needed. Until now, there are a lot of reports on the etching of sapphire wafer with using $Cl_2$/Ar, $BCl_3$/Ar, HBr/Ar and so on [1]. However, the etch behavior of sapphire wafer have investigated with variation of only one parameter while other parameters are fixed. In this study, we investigated the effect of pressure and other parameters on the etch rate and the selectivity. We selected $BCl_3$ as an etch ant because $BCl_3$ plasmas are widely used in etching process of oxide materials. In plasma, the $BCl_3$ molecule can be dissociated into B radical, $B^+$ ion, Cl radical and $Cl^+$ ion. However, the $BCl_3$ molecule can be dissociated into B radical or $B^+$ ion easier than Cl radical or $Cl^+$ ion. First, we evaluated the etch behaviors of sapphire wafer in $BCl_3$/additive gases (Ar, $N_2,Cl_2$) gases. The behavior of etch rate of sapphire substrate was monitored as a function of additive gas ratio to $BCl_3$ based plasma, total flow rate, r.f. power, d.c. bias under different pressures of 5 mTorr, 10 mTorr, 20 mTorr and 30 mTorr. The etch rates of sapphire wafer, $SiO_2$ and PR were measured with using alpha step surface profiler. In order to understand the changes of radicals, volume density of Cl, B radical and BCl molecule were investigated with optical emission spectroscopy (OES). The chemical states of $Al_2O_3$ thin films were studied with energy dispersive X-ray (EDX) and depth profile anlysis of auger electron spectroscopy (AES). The enhancement of sapphire substrate can be explained by the reactive ion etching mechanism with the competition of the formation of volatile $AlCl_3$, $Al_2Cl_6$ or $BOCl_3$ and the sputter effect by energetic ions.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.38-43
• /
• 2013

In this study we aims to examine the effects of $Co_3O_4$ and NiO doping on the defects and electrical properties in ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5) varistors. It seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.20 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects in Co and Ni co-doped ZBS system, however only ${V_o}^{\cdot}$ appeared in Co- or Ni-doped ZBS. Even though the same defects it was different in capacitance (1.5~4.5 nF) and resistance ($0.3{\sim}9.5k{\Omega}$). The varistor characteristics were improved with Co and Co+Ni doping (non-linear coefficient, ${\alpha}$= 36 and 29, relatively) in ZBS. The various parameters ($N_d=1.43{\sim}2.33{\times}10^{17}cm^{-3}$, $N_t=1.40{\sim}2.28{\times}10^{12}cm^{-2}$, ${\Phi}b$=1.76~2.37 V, W= 98~118 nm) calculated from the C-V characteristics in our systems did not depend greatly on the type of dopant, which were in the range of a typical ZnO varistors. It should be derived a improved C-V equation carefully for more reliable parameters because the variation of the varistor capacitance as a function of the applied dc voltage is depend on the defect, frequency, and temperature.

• 지역사회간호학회지
• /
• 제5권2호
• /
• pp.109-129
• /
• 1994

Chronic health problems has become a major concern and challenge to the health care professionals today. Especially hypertension, one of the leading primary cause of death in Korea, is a typical chronic disease requiring adequate and continuous management. Though these hypertensives need to maintain desirable health practice by themselves for their life time, many previous studies indicated that most of the essential hypertensives have no specific symptoms and thus, reluctant to follow appropriate medical regimens causing the condition further aggravated and complicated. Self-care is an essential factor that keeps chronic patients in control of their health and wellness. Thus this study was conducted to identify the effect of the comprehensive self-regulation program as a nursing intervention on the promotion self-care performance and improvement in physical parameters of hypertensives. For this purpose, a one group quasi-experimental research with pre and post test design was used. The subjects of the study was consisted of thirty persons with mild or moderate essential hypertension from two companies in Cheong-ju city. The whole program was carried out from October, 1993 to February, 1994. The self-regulation program was consisted with group education on hypertension and self-care, self-regulation including the blood pressure self-monitoring and recording, recording of daily self-care activities, and encouraging and reinforcing self-efficacy through verbal persuation and enactive attainment. The subjects were asked to measure their own blood pressure by themselves twice per day and to record blood pressure and the daily self-care performance according to the instructions provided during the whole period of 9 weeks. The instruments used for data collection in this study were as follows : 1) Instruments used for measuring the knowledge about hypertension, multiple health locus of control, and perceived benifits and barriers were adapted from previous studies and modified by author to be fit for the subjects. 2) Self-efficacy scale and self-care performance record were developed by the author. 3) Physiological parameters included systolic / diastolic blood pressure, body weight, level of blood cholesterol, and 24hour ambulatory blood pressure. The post-experimental Cronbach's Alpha as the reliability test of scales were 0.703-0.897, an appropriate level of confidence. The effect of the program was analyzed by experimental stages ; the first week, the fifth week, and the ninth week since the experimental imput began. Data were analyzed by the SPSS PC+ program with paired t-test and t-test, repeated measure ANOVA, and pearson's correlation to de termine the effect of program. The results were as follows : 1) After the self-regulation program, scores on knowledge(t=-2.41, p=.011), perceived self-efficacy (F=5.60, p=.001), self-care performance(F=22.31, p=.0001) were significantly higher than those before the program. 2) After the program, both systolic and diastolic blood pressure were significantly lower than those before the program(F=10.89 -13.11, p=.0001). However in 24hour ambulatory blood pressure, systolic mean pressure was nearly significantly lower, but not in diastolic mean pressure. 3) After the program, the body weight was significant decresed(t=5.53, p=.0001), but the blood cholesterol level was not decreased significantly except in those cases with higher cholesterol level. 4) There were significant relationships between changes in self-care performance and diastolic pressure at 1st week (r=.3389, p=.033) and changes in self-care performance and systolic pressure at 9th week(r=.3651, p=.024). 5) There were significant relationship between perceived self-efficacy and self-care performance at 5th week(r=.5313, p=.001) and 9th week (r=.3026, p=.052). 6) After the program, internal health locus of control and perceived benefits did not show significant change, but perceived barriers was significantly lower than those before the program (t=3.57, p=.0001). From the above results, it can be concluded that 1) The self-regulation program is an effective nursing strategy to promote self-care performance of hypertensives and to lower the blood pressure. Thus this program can be recommended in the management of the hypertensives in workplaces and community settings. 2) The synthesis of Orem's self-care theory and Bandura's self-regulation & self-efficacy theory in this study was proved to enhance explanation and prediction of the change of self-care behavior. Thus the result of the study would contribute in development of the self-care theory and an expansion of practice-theory.

• 생물정신의학
• /
• 제12권2호
• /
• pp.123-135
• /
• 2005

Objectives:EEG coherence could imply the connectivity between two different areas of the brain, which is known to be important in the pathophysiology of bipolar I disorder(BPD I) and schizophrenia. The authors investigated EEG coherence in patients with BPD I and schizophrenia to examine the connectivity of the neural circuit. Methods:EEGs were recorded in 15 schizophrenia and 14 bipolar disorder patients, and 14 age-matched normal control subjects from 16 electrodes with linked-ear reference. Spectral parameters and coherence were calculated for the alpha bandwidth(8-13Hz) by a multi-channel autoregressive model using 20 artifact-free 2-seconds epochs and the differences were compared among three groups by two different statistical methods;F-test and Kruskal-Wallis test. Furthermore, when there were significant differences among three groups, Scheffe's multiple comparison tests were provided and Jonckheere-Terpstra tests for the ordered alternative were given. Results:In the intra-hemispheric comparison, left frontal coherence was increased in order of control, BPD I and schizophrenia. In the inter-hemispheric comparison, 1) inter-prefrontal coherence in BPD I was signifi- cantly higher than in normal controls, and 2) inter-prefrontal coherence in schizophrenia was significantly lower than in controls. Conclusion:These results suggest that 1) both schizophrenia and BPD I are diseases having the abnormality of neural circuit connectivity in both frontal and prefrontal lobes, and 2) the abnormality is more severe in schizophrenia than in BPD I. Furthermore, the data support that a common pathogenetic process may reside in both schizophrenia and BPD I.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.120-120
• /
• 1998

Boron nitride (BN) films have attracted a growing interest for a variety of t technological applications due to their excellent characteristics, namely hardness, c chemical inertness, and dielectrical behavior, etc. There are two crystalline phases 1551; of BN that are analogous to phases of carbon. Hexagonal boron nitride (h-BN) has a a layered s$\sigma$ucture which is spz-bonded structure similar to that of graphite, and is t the stable ordered phase at ambient conditions. Cubic boron nitride (c-BN) has a z zinc blende structure with sp3-bonding like as diamond, 따ld is the metastable phase a at ambient conditions. Among of their prototypes, especially 삼Ie c-BN is an i interesting material because it has almost the same hardness and thermal c conductivity as di없nond. C Conventionally, significant progress has been made in the experimental t techniques for synthesizing BN films using various of the physical vapor deposition 밍ld chemical vapor deposition. But, the major disadvantage of c-BN films is that t they are much more difficult to synthesize than h-BN films due to its narrow s stability phase region, high compression stress, and problem of nitrogen source c control. Recent studies of the metalorganic chemical vapor deposition (MOCVD) of I III - V compound have established that a molecular level understanding of the d deposition process is mandatory in controlling the selectivity parameters. This led t to the concept of using a single source organometallic precursor, having the c constituent elements in stoichiometric ratio, for MOCVD growth of 삼Ie required b binary compound. I In this study, therefore, we have been carried out the growth of h-BN thin f films on silicon substrates using a single source precursors. Polycrystalline h-BN t thin films were deposited on silicon in the temperature range of $\alpha$)() - 900 $^{\circ}$C from t the organometallic precursors of Boron-Triethylamine complex, (CZHs)3N:BRJ, and T Tris(dimethylamino)Borane, [CH3}zNhB, by supersonic molecular jet and remote p plasma assisted MOCVD. Hydrogen was used as carrier gas, and additional nitrogen w was supplied by either aDlIDonia through a nozzle, or nitrogen via a remote plasma. T The as-grown films were characterized by Fourier transform infrared spectroscopy, x x-ray pthotoelectron spectroscopy, Auger electron spectroscopy, x-ray diffraction, t transmission electron diffraction, optical transmission, and atomic force microscopy.roscopy.