• Applied Biological Chemistry
• /
• v.38 no.1
• /
• pp.42-48
• /
• 1995

The experiment was carried out to purify and to investigate the properties of the cyclodextrinase produced from Bacillus megaterium KFCC 11855. The enzyme was partially purified with $(NH_4)_2SO_4$ and chromatography on DEAE-trisacryl, Ultrogel AcA 34, DEAE-trisacryl and Ultrogel HA. The optimum temperature and pH of the purified enzyme were $60^{\circ}C$ and 6.0, respectively. The enzyme was stable at the temperature of $45^{\circ}C$ below and at the pH range of $6.0{\sim}9.0$, respectively. The Km value for ${\gamma}-cyclodextrin$ was 0.903 mM. The enzyme activity was increased by $Mg^{2+}$ and $Mn^{2+}$, but decreased by $Hg^{2+}$ and $Cu^{2+}$. The enzyme degraded ${\gamma}-cyclodextrin$ but not ${\alpha}-cyclodextrin$. The degree of ${\beta}-CD$ degradation by the enzyme was very low. The decomposed products of ${\gamma}-cyclodextrin$ by the enzyme were mainly glucose, maltose and a little amount of maltotriose.

• Journal of Integrative Natural Science
• /
• v.3 no.3
• /
• pp.174-180
• /
• 2010

This study was conducted to investigate the major chemical components of dried Capsosiphon fulvescens. The proximate compositions of C. fulvescens as dry matter basis were the moisture content 6.27%, 27.66% of crude protein, 1.68% of crude fat, 10.69% of crude ash, and 53.70% of carbohydrate, respectively. Analysing total amino acids, 17 kinds of components isolated from C. fulvescens. The essential amino acid contained in C. fulvescens accounted for 42.33% of total amino acid, while the non-essential amino acid accounted for 57.67%. Fatty acids were of 13.34% of saturated fatty acids, 21.69% of monounsaturated fatty acids and 64.97% of polyunsaturated fatty acids. Linoleic acid, oleic acid, palmitic acid and linolenic acid were the major fatty acids among 14 fatty acids detected in dried C. fulvescens. Oxalic acid was the major organic acids. The contents of vitamin A and vitamin E were 0.021 mg% and 0.001 mg%, respectively. The mineral contents of dried C. fulvescens were greater in order of Mg

• The Korea Journal of Herbology
• /
• v.21 no.2
• /
• pp.95-101
• /
• 2006

Objectives : This study aimed to establish cosmeceutical activities of Perilla frutescens var. acuta. Methods : Folium Perillae, which had been extracted, concentrated, and freeze drying with water and ethanol, have been used for the experiment. The effects on electronic donating ability, SOD-like activity, xanthine oxidase inhibition, whitening effect have been investigated in the cosmeceutical activity measurement of function experiment. Results : Both water and ethanol extracts of Perilla frutescens var. acuta showed relatively high electron donating ability of more than 70% at over 500ppm. Also, SOD like activity increased in a dose dependent matter of more than 80% at 5,000ppm, while tyrosinase showed insufficient inhibitory rate. Xanthine oxidase showed a meaningful inhibitory effect of 72.4% in water extract and 55.3% at 1,000ppm in ethanol extract. The addition of $Fe^{2+}ion\;and\;Cu^{2+}ion$ showed relatively high oxidizing inhibitory effect of 57% and 41%, respectively, at 500ppm in water extract and, when $Fe^{2+}$ ion was added in ethanol extract, the effect of 64% at 1,000ppm was achieved. Also, higher oxidizing inhibitory effect was shown against $Fe^{2+}$ rather than $Cu^{2+}$ in both water and ethanol extracts. For human cancer cells, relatively high growth inhibition ability was shown against melanoma G361 in both water and ethanol extracts. Conclusion : From the above results, it was confirmed that Perilla frutescens var. acuta could be used in functional cosmetics.

• Journal of Hydrogen and New Energy
• /
• v.10 no.4
• /
• pp.225-232
• /
• 1999

The $Mg_2Ni$ hydrogen storage alloys which have much higher theoretical discharge capacity than $AB_5$ and $AB_2$ type alloys were synthesized by mechanical alloying with some additives and subjected to the electrochemical measurements. Two different processes were employed to the synthesis of $Mg_2Ni$ alloys with using the high energy ball mill SPEX 8000. One was only ball milling, 12 hrs, the Mg and Ni powders for 12 hrs with additives such as $AB_5$, Ni, Co and Cu powders. In the other process the Mg and Ni powders were ball milled for 1 hr first and then heat treated at $300{\sim}400^{\circ}C$ for 1 hr to get $Mg_2Ni$ alloy, and finally the $Mg_2Ni$ alloy powders were ball milled with the additives for 12 hrs. The alloy powders prepared were compacted at room temperature under $7.64tons/cm^2$ into disk type electrodes for the electrochemical measurements. The experimntal results showed that the electrodes prepared with the heat treated alloy powders had a higher discharge capacities than those without heat treatment. The addition of Ni caused an increase of the discharge capacity and the addition of Co improved the cycling characteristics. The electrode prepared by ball milling of $Mg_2Ni$ and 10wt% Ni powders has showed the highest discharge capacity, 546mAh/g.alloy, which was 55% of the theoretical capacity.

• BMB Reports
• /
• v.35 no.3
• /
• pp.330-336
• /
• 2002

The lgtB genes that encode $\beta$-1,4-galactosyltransferases from Neisseria meningitidis ATCC 13102 and gonorrhoeae ATCC 31151 were isolated by a polymerase chain reaction using the pfu DNA polymerase. They were expressed under the control of lac and T7 promoters in Escherichia coli M15 and BL21 (DE3). Although the genes were efficiently expressed in E. coli M15 at $37^{\circ}C$ (33 kDa), most of the $\beta$-1,4-galactosyltransferases that were produced were insoluble and proteolysed into enzymatically inactive polypeptides that lacked C-terminal residues (29.5 kDa and 28 kDa) during the purification steps. When the temperature of the cell growth was lowered to $25^{\circ}C$, however, the solubility of the $\beta$-1,4-galactosyltransferases increased substantially. A stable N-terminal his-tagged recombinant enzyme preparation could be achieved with E. coli BL21 (DE3) that expressed lgtB. Therefore, the cloned $\beta$-1,4-galactosyltransferases were expressed under the control of the T7 promoter in E. coli BL21 (DE3), mostly to the soluble form at $25^{\circ}C$. The proteins were easily purified to homogeneity by column chromatography using Ni-NTA resin, and were found to be active. The galactosyltransferases exhibited pH optimum at 6.5-7.0, and had an essential requirement for the $Mn^{+2}$ ions for its action. The $Mg^{+2}$ and $Ca{+2}$ ions showed about half of the galactosyltransferase activities with the $Mn^{+2}$ ion. In the presence of the $Fe^{+2}$ ion, partial activation was observed with the $\beta$-1,4-galactosyltransferase from N. meningitidis(64% of the enzyme activity with the $Mn^{+2}$$Ni^{+2}$, $Zn^{+2}$, and $Cu^{+2}$ ions could not activate the $\beta$-1,4-galactosyltransferase activity. The inhibited enzyme activity with the $Ni^{+2}$ ion was partially recovered with the $Mn^{+2}$$Fe^{+2}$, $Zn^{+2}$, and $Cu^{+2}$ ions, the $Mn^{+2}$$\beta$-1,4-galactosyltransferase activity was 1.5-fold stimulated with the non-ionic detergent Triton X-100 (0.1-5%).

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.57-64
• /
• 1996

석탄중에는 미량원소(trace elements)가 포함되어 있으며 이들의 농도는 석탄의 종류나 산지에 따라 크게 다르다. 석탄중의 미량원소를 제거하는 것은 그동안 크게 문제가 되지 않았으나 최근 환경문제가 점차 고조되면서 이에 대한 관심이 높아지고 있다. 일반적으로 사람의 건강 및 환경에 유해한 원소중에서 화석연료 사용과 관련이 있는 원소는 비소(As), 카드늄(Cd), 납(Pb), 구리(Cu), 수은(Hg), 니켈(Ni), 셀레니움(Se) 및 아연(Zn) 등 8개 원소이다. 그러나 그외에도 배출규제의 대상이 되는 원소는 코발트(Co), 염소(Cl), 안티모니(Sb), 베릴리움(Be), 크롬(Cr)과 망간(Mn)이며 이중 망간은 석탄사용과 직접적인 관련이 있다. 따라서 Mn을 포함한 9개 원소가 석탄의 사용에 따른 중금속 방출과 관련이 있는 것으로 간주되고 있다. 본 연구에서는 발전용 석탄에 대한 물리적 전처리 공정을 적용하여 석탄중의 광물질등을 미리 제거하므로서 연소 후 배출되는 배기가스중의 중금속 저감 가능성을 관찰하였다. 본 연구결과 전처리 공정의 석탄중의 Trace elements양을 감소시키므로서 연소 후 중금속의 배출량을 크게 줄일 수 있음을 확인하였다. 발전소에 적용하고 있는 ESP가 배출가스중 As, Cu, Zn, Mn등의 중금속을 제거하는데 효율적이기는 하나 가스상으로 존재하는 Hg, Se등을 제거하는데는 효율적이지 못하다. 전처리공정 전후 회분중에 함유된 미량원소를 분석한 결과, 국내 무연탄이나 해외 유연탄 모두 중금속 제거에 있어서 유사한 경향을 보여주었으며, Pb, Zn, Mn 등은 50∼70%, 특히 Hg 배출량은 80% 이상 저감이 가능하였다. 전반적으로 년간 총 중금속 배출량도 50∼60%가 감소하여 전처리 공정이 석탄중의 중금속을 줄이는데 크게 기여함을 확인하였다.을 선택할 수 있는 메뉴 그리고 계산 결과를 파일로 혹은 프린트로 출력할 것을 선택할 수 있는 메뉴가 있다. 사용자는 해당되는 데이타를 입력한후 마우스로 원하는 작업의 메뉴를 선택하면 된다. 방법을 타액과 혈청내 testosterone 농도 측정에 응용하여 RIA의 결과와 비교하여 본 바 상관관계가 타액에서 r=0.969, 혈청에서 r=0.990으로 두 결과가 잘 일치하였다. 본 실험에서 측정된 한국인 여성의 타액내 testosterone농도는 107.7$\pm$12.0 pmol／l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol／l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japanese Letter Jobcheso.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.28-41
• /
• 2017

In this paper, the fast encoding algorithm in High Efficiency Video Coding (HEVC) encoder was studied. For the encoding efficiency, the current HEVC reference software is divided the input image into Coding Tree Unit (CTU). then, it should be re-divided into CU up to maximum depth in form of quad-tree for RDO (Rate-Distortion Optimization) in encoding precess. But, it is one of the reason why complexity is high in the encoding precess. In this paper, to reduce the high complexity in the encoding process, it proposed the method by determining the maximum depth of the CU using a hierarchical clustering at the pre-processing. The hierarchical clustering results represented an average combination of motion vectors (MV) on neighboring blocks. Experimental results showed that the proposed method could achieve an average of 16% time saving with minimal BD-rate loss at 1080p video resolution. When combined the previous fast algorithm, the proposed method could achieve an average 45.13% time saving with 1.84% BD-rate loss.

• Journal of the Korean Dietetic Association
• /
• v.16 no.2
• /
• pp.116-121
• /
• 2010

Minerals play an important role in the body as essential nutrients. However, it is not easy to meet DRIs because food sources of minerals are limited. Recently, consumption of bottled natural water has been increasing in Korea due to water pollution and distrust of tap water. The present study was conducted to investigate mineral contents in bottled natural water and their intakes among Korean adults. We analyzed eight minerals in seven kinds of bottled natural water by ICP-spectrometry and conducted a survey on the intake status of water and bottled natural water with 400 Korean young adults. The mean contents of Ca, Mg, Fe, Zn, Cu, Mn, Se, and Mo in bottled natural water were 22.45${\pm}$22.48 mg/L, 10.59${\pm}$9.97 mg/L, 0.27${\pm}$0.18 ${\mu}g/L$, 2.06${\pm}$1.48 ${\mu}g/L$, 5.47${\pm}$0.70 ${\mu}g/L$, 1.43${\pm}$0.37 ${\mu}g/L$, 1.90${\pm}$0.96 ${\mu}g/L$, and 3.34${\pm}$0.79 ${\mu}g/L$, respectively. The mean age, height, weight, and BMI were 22.76 years, 174.94 cm, 68.64 kg, and 22.41 $kg/m^2$ for males (n=150) and 21.25 years, 162.04 cm, 51.05 kg, and 19.46 $kg/m^2$ for females (n=250), respectively. The respective daily intakes of total water and bottled natural water as water itself were 670.30 ml and 212.20 ml for males and 488.04 ml and 132.72 ml for females. The daily intakes of Ca, Mg, Fe, Zn, Cu, Mn, Se, and Mo from bottled natural water were 4.76 mg, 2.25 mg, 0.06 ${\mu}g$, 0.44 ${\mu}g$, 1.16 ${\mu}g$, 0.30 ${\mu}g$, 0.40 ${\mu}g$, and 0.71 ${\mu}g$ for males and 2.98 ${\mu}g$, 1.41 mg, 0.04 ${\mu}g$, 0.27 ${\mu}g$,0.73 ${\mu}g$, 0.19 ${\mu}g$,0.25 ${\mu}g$, and 0.44 ${\mu}g$ for females, respectively. Overall, the contents of Ca, Mg, and Se in bottled natural water were relatively high and the daily intakes of these minerals were 0.4~1.0% of the DRIs.

• Restorative Dentistry and Endodontics
• /
• v.13 no.2
• /
• pp.221-235
• /
• 1988

The purpose of this study was to observe characteristic properties through the polarization curves and EMPA images from 4 different types of amalgam obtained by using the potentiostats (EG & G PARC) & EPMA (Jeol JSM-35), to investigate the degree of corrosion of each phase of amalgam on the oxidation peak, and to identify corrosion products from the corroded amalgam by use of X-ray diffractometer(Rigaku). After each amlgam alloy and Hg were triturated as the direction of the manufacturer by means of the mechanical amalgamator(Shofu), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10mm in height and was condensed by means of routine manner. The specimen was removed from the mold and stored at room temperature for about 7 days. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to compare the corrosion behaviours of the amalgams in 0.9% saline solution(pH6.8~7.0) and artificial saliva (pH6.8~7.0) at $37^{\circ}C$. The open circuit potential was determined after 30 minutes' immersion of specimen in electrolyte and the potential scan was begun at the potential of 100mV cathodic from the corrosion potential. The scan rate was 1mV/sec and the surface area of amalgam exposed to the solution was 0.64$cm^2$ for each specimen. All the potentials reported are with respect to a saturated calomel electrode (SCE). EPMA images on the determined oxidation peaks of each amalgam in artificial saliva were observed. X-ray diffraction patterns of each sample were recorded before and after polarization in artificial saliva (Aristaloy, Caulk Spherical, Dispersalloy and Tytin: at +770mV, +585mV, +8.10m V and +680m V respectively) by use of a recording diffractometer. Nickel filtered Cu $K_{{\alpha}_1}$ radiation was used and sample was scanned at $4^{\circ}(2{\theta})/min.$ from $25^{\circ}$ to $80^{\circ}$. The following results were obtained. 1. Oxidation peak potential in artificial saliva shifted to more anodic direction than that in saline solution. 2. The corrosion potential of high copper amalgam was more anodic than the potential of low copper amalgam. 3. The current density was lower in artificial saliva than in saline solution. 4. One of the corrosion products, AgCl was identified by X-ray diffraction analysis. 5. ${\gamma}_2$ phase was the most susceptible to corrosion and e phase was stable in low copper amalgam and ${\eta}$' phase and Ag-Cu eutectic were susceptible to corrosion in high copper amalgam.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.1
• /
• pp.28-39
• /
• 2016

Struvite (MgNH₄PO₄ ⋅ 6H₂O) and hydroxyapatite (HAP, Ca₁₀(PO₄)₆(OH)₂) precipitation in urine-separating toilets (NoMix toilets) causes severe maintenance problems and also reduce the phosphate and calcium content. Application of urine separating technique and extraction of by-products from human urine is a cost effective technique in waste water treatment. In this study, we extract urine calcite from human urine by batch scale method, using urease producing microbes to trigger the precipitation and calcite formation process. Extracted urine calcite (calcining at 800℃) is a potential adsorbent for removal of heavy metal(loid)s like (Cd²⁺, Cu²⁺, Ni²⁺, Pb²⁺, Zn²⁺ and As³⁺) along with additional leaching analysis of total nitrogen (T-N), phosphate (T-P) and chemical oxygen demand (COD). The transformations of calcite during synthesis were confirm by characterization using XRD, SEM-EDAX and FT-IR techniques. In additional, the phosphate leaching potential and adsorbate (nitrate) efficiency in aqueous solution was investigated using the calcinedurine calcite. The results indicate that the calcite was effectively remove heavy metal(loid)s lead up to 96.8%. In addition, the adsorption capacity (q_e) of calcite was calculated and it was found to be 203.64 Pb, 110.96 Cd, 96.02 Zn, 104.2 As, 149.54 Cu and 162.68 Ni mg/g, respectively. Hence, we suggest that the calcite obtain from the human urine will be a suitable absorbent for heavy metal(loid)s removal from aqueous solution.