• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.86-89
• /
• 2004

The present study reports the preparation of a compact ZSM-5 membrane showing high thermal stability and high separation factors, especially n-/i-butane isomers at high temperatures. ZSM-5 membrane was prepared on a porous $\alpha$-Al$_2$O$_3$ tube (an average pore diameter, ca. 100 nm) at 18$0^{\circ}C$ by the seed-assisted crystallization method. The XRD and SEM results showed that a thin zeolite layer (ca. 1 ${\mu}{\textrm}{m}$) was formed on the support surface. The single gas permeances of $N_2$, H$_2$, SF$_{6}$, n-butane, and i-butane were taken at 27$0^{\circ}C$. i-Butane permeance hardly changed after repeated thermal treatments up to 40$0^{\circ}C$, indicating the membrane is thermally stable. On the other hand, other single gas permeances increased when the membrane was further dried at 40$0^{\circ}C$, indicating thermal pretreatment at 27$0^{\circ}C$ could not remove all the adsorbed species in the membrane. i-Butane and SF$_{6}$ permeances were significantly lower than the permeances of smaller molecules, indicating that the membrane has a low concentration of defects. The ideal selectivities at 27$0^{\circ}C$ were 61 for $H_2$/i-butane and 47 for $H_2$/SF$_{6}$. The temperature dependency of n/i-butane ideal selectivities and separation factors for an equimolar n/i-butane mixture was studied. The ideal selectivity showed a maximum of 36 at 30$0^{\circ}C$. The separation factors increased with temperature and reached around 12 at 300-40$0^{\circ}C$, which were much higher than those reported in the literature.ature.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.102-103
• /
• 2000

화학레이저는 화학연료의 반응에서 생성되는 막대한 화학에너지를 이용하여 레이저를 발생시키며, 반응하는 화학연료의 양에 따라 수천 kW의 고출력을 낼 수 있는 가장 강력한 레이저이다. 화학레이저인 Chemical Oxygen-Iodine Laser(COIL)는 염소기체(Cl$_2$)를 염기성 과산화수소수 용액과 반응시켜 고에너지의 여기산소(O$_2$($^1$$\Delta$))를 생성시키고 여기산소가 다시 요오드 원자와 반응하면서 1.3 $mu extrm{m}$ 파장의 레이저를 발생시킨다.(1)-(2) 이와같은 COIL 레이저는 발진효율이 높고 포화 강도가 높아 수십 kW 급의 고출력이 용이하게 이루어 질 수 있으며 광섬유 전송시 광손실이 가장 적어 레이저 빔의 원격 전송에 의한 재료가공에 적합한 레이저이다. 가공용레이저로 많이 사용하는 $CO_2$ 레이저에 비해 발진 파장이 짧으므로 재료의 광흡수율이 높아 일반 산업분야의 용접/절단에서 기존의 $CO_2$ 레이저를 대체할 것으로 기대되는 상용성이 큰 레이저이다.(3)-(4) 또한 COIL은 우수한 집속 특성을 유지하면서도 고출력의 개발이 가능하다. 이미 외국에서는 비록 단시간 동안 동작하지만 수백 kW급이 실현되었으며 수천 kW 급 고출력 항공기탑재형 COIL 이 수백 km의 거리에서 미사일을 요격하기위해 지금 개발중에 있다.(5) 일반 산업용 광섬유에 의해 쉽게 전송되는 파장인 1.315 $\mu\textrm{m}$ 인 수십 kW 급 COIL 은 조선 등의 중공업산업용 및 원자력 제염/해체분야에서 다용도 기술로서 광범위하게 사용될 것이다. COIL은 다양한 재료와 다양한 두께의 구조물 절단, 표면처리 그리고 용접에도 이용될 수 있다. COIL의 산업화는 빠르게 발전하고 있으며 산업용으로써 장시간 연속사용이 가능한 20-30 kW급 시설이 곧 개발될 것으로 기대된다. 따라서 개발될 고출력 화학레이저가 앞으로 원자력시설의 해체시 작업자의 안전성 향상에 크게 기여할 수 있게 되었다.(6) 여기서는 화학레이저인 COIL 장치와 기본적인 원리, 그리고 염소유량에 따른 출력특성등을 살펴보기로 하겠다. (중략)

• Culinary science and hospitality research
• /
• v.8 no.1
• /
• pp.55-69
• /
• 2002

Sedum Sarmentosum Bunge has been used as medical material and food in Korea. To upgrade it's value as a materials of beverage, I research and analysed nutritive substance and taste. Inorganic components content was included in the order of Ca, mg, P, K, Na, in line, and there were little Fe, Cu, Zn. It appeared much Ascorbic acid contents in May sample for March sample, but it was included less than other Green Vegetables. Chlorophyll contents decreased about 37.8% and 37.6% to the first each contents after seven days resulting measuring May sample and March sample in room temperature. There was much difference in appearance. Sedum Sarmentosum Bunge included a little polyphenol contents. Polyphenol contents decreased a little in five days in May sample and March sample. I measured phenol compounds of garlic acid, vani11ic acid, caffeic acid, p-coumaric acid, ferulic acid, most of consisted in corrected forms. Fragrance components were confirmed 9 kinds in March sample, 11 kind in May sample the common components in May sample and March sample were 7-octen-4-o1.

• Journal of Chest Surgery
• /
• v.30 no.12
• /
• pp.1159-1166
• /
• 1997

For Improvement of lung preservation, many tripes of preservation solution were developed and tested. The aim of this study was to compare the effect of the most frequently used extracellular type pieservation solution (Low Potassium Dextran, LPD) with a newly developed trehalose containing extracellular type preservation solution(ET-Kyoto, ETK) on postischemic lung function. Twelve New-Zealand white rabbit lungs were harvested and studied on an isolated, blood-perfused model of lung function after 4 hours of cold ischemia at $10^{\circ}C$ In group I (n=6), lungs were preserved with 100 mL/kg of LPD solution; in group II(n=6), lungs were preserved with 100 mL/kg of ETK solution. A few minutes before flushing with preservation solutions, 20$\mu\textrm{g}$ of PGEI were injected into main pulmonary artery. Functions of the preserved lung were compared with PO2, PA pressure, t acheal air pressure, and drylwet ratio. The pulmonary efferent blood oxygen tension at the end of the 60-minute reperfusion period was higher in group II compacted with group I(486.5 $\pm$ 80.3 mmHg versus $432.5\pm82.9$ mmHg at FiO2 1.0, p-value = NS). The mean pulmonary arterial pressure was similar in both $groups.(33.7\pm2.2$ mmHg versus $35.5\pm2.0$ mmHg, p-value : NS). The peak inspiratory airway pressure was significantly lower in group 11(8.010.6 mmHg versus 11.8 $\pm$ 1.4 mmHg, p-value=0.02) The water content of the lung was lower in group II $(70.2\pm6.9%$ versus 78.5 $\pm6.1%),$ but not significant. These data demonstrate that a newly-developed trehalose-containing ET-Kyoto solution yield equal or slightly superior lung function after reperfusion compared with LPD solution.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.18-26
• /
• 1997

$\beta-SiC $powder with or without the addition of 1 wt% of $\alpha-SiC$ particles (seeds) was pressureless-sintered at $1950^{\circ}C$ for 0.5, 2 and 4 h using $Y_3Al_5O_{12}$ (yttrium aluminum garnet, YAG) as a sintering aid. The introduction of $\alpha-SiC$ seeds into $\beta-SiC$ accelerated :he grain growth of elongated large grains during sintering, resulting in the coarser microstructure. The fracture toughnesses of materials with $\alpha$-SiC seeds and without $\alpha-SiC$ seeds sintered for 4 h were 7.5 and 6.1 $MPa\cdot \textrm m^{1/2}$, respectively. Higher fracture toughness of the material with seeds was due to the enhanced bridging by elongated grains, resulting from coarser microstructure.

• Microbiology and Biotechnology Letters
• /
• v.7 no.1
• /
• pp.23-30
• /
• 1979

Fungi which produce red pigment were isolated from tapioca chips, Korean Koji, air, and plant leaves. Among the Fungi, T-1 strain was selected as test strain. This strain was identified as a Monatcus sp. by the morphological propeties. Various culture conditions, and physical and physiological characteristics of red pigment were studied. According to the studies of culture conditions, optimum condition was found to be pH 6.5; 4 days of incubation; temperature, 32~33 c: 3.5％ of Tapioca chips powder as carbon source, 0.2％ of sodium nitrate as nitrogen source and 100 ml of medium in the 500 ml Erlenmyer flask at a rotary shaker (rpm180) as aeration condition. Also effective levels of vitamins, amino acids and inorganic compounds was found to be l$\mu\textrm{g}$/ml of folic acid and niacin; 0.3％ of L-arginine, L-glutamic acid and L-proline; and 0.001％ of manganese dioxide giving good results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.211-219
• /
• 2001

This paper describes a read-only CMOS transponder IC for RFID applications. A full-wave rectifier implemented using NMOS transistors supplies the transponder with a dc supply voltage using the magnetic field generated from a reader. A 64-bit ROM has been designed for a data memory. Front-end impedance modulation and Manchester coding are used for transmitting the data from the transponder memory to the reader. A new damping circuit which has almost constant damping rate under the variations of the distance between the transponder and the reader has been employed for impedance modulation. The designed circuit has been fabricated using a 0.65${\mu}{\textrm}{m}$2-poly, 2-metal CMOS process. Die area is 0.9mm$\times$0.4mm. Measurement results show that it has a constant damping rate of around 20~25% and a data transmission rate of 3.9kbps at a 125KHz RF carrier. The power required for reading operation is about 100㎼. The measured reading distance is around 7cm.

• Archives of Pharmacal Research
• /
• v.27 no.2
• /
• pp.169-172
• /
• 2004

Activity-guided fractionation of the EtOAc-soluble extract of the stems of Couepia ulei, using a bioassay based on the induction of quinone reductase (QR) in cultured Hepa 1c1c7 mouse hepatoma cells led to the isolation of two active compounds, a new natural product, erythro-2,3-bis(4-hydroxy-3-methoxyphenyl)-3-ethoxypropan-1-o1 (1), and a known compound, evofolin-B (2), along with five inactive compounds all of known structure, viz., betulinic acid, oleanolic acid, pomolic acid, ($\pm$)-syringaresinol, and ursolic acid. These isolates were identified by analysis of physical and spectral data. Compounds 1 and 2 exhibited QR inducing activity, with observed CD (concentration required to double induction) values of 16.7 and 16.4 $\mu\textrm{M}$, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.35-42
• /
• 1979

Experiments were conducted to find out the labor saving efficiency and optimum seeding rate and fertilizer level when newly invented Barley Rotor Caster was used in wheat sowing on paddy field. It decreased the labor for sowing by 66~77% compared with conventional sowing method. And the optimum. seeding rate was considered to be approximately 20$\ell$Q per 10a in standard fertilizer level and optimum fertilizer level to be 18-12-12kg/10a, $N-P_2O_5-K_2O$ respectively.