• 대한금속재료학회지
• /
• 제50권6호
• /
• pp.455-462
• /
• 2012

Al-Si coated boron steel and Zn coated DP steel plates were laser-welded to manufacture a Tailor Welded Blank (TWB) for a car body frame. Hot-stamping heat treatment ($900^{\circ}C$, 5 min) was applied to the TWB weld, and the microstructural change and transformation mechanism were investigated in the Al-rich area near the bond line of the Al-Si coated steel side. There was Al-rich area with a single phase, $Fe_3(Al,Si)$, which was transformed to ${\alpha}-Fe$ (Ferrite) after the heat treatment. It could be explained that the $Fe_3(Al,Si)$ phase was transformed to ${\alpha}-Fe$ during heat treatment at $900^{\circ}C$ for 5 min and the resultant ${\alpha}-Fe$ phase was not transformed by rapid cooling. Before the heat treatment, the microstructures around the $Fe_3(Al,Si)$ phase consisted of martensite, bainite and ${\alpha}-Fe$ while they were transformed to martensite and ${\delta}-Fe$ after the heat treatment. Due to the heat treatment, Al was diffused to the $Fe_3(Al,Si)$ and this resulted in an increase of Al content to 0.7 wt% around the Al-rich area. If the weld was held at $900^{\circ}C$ for 5 min it was transformed to a mixture of austenite (${\gamma}$) and ${\delta}-Fe$, and only ${\gamma}$ was transformed to the martensite by water cooling while the ${\delta}-Fe$ was remained unchanged.

• 대한환경공학회지
• /
• 제31권4호
• /
• pp.278-286
• /
• 2009

본 연구에서는 망간원석을 포함한 4종의 천연망간산화물($NMO_1\;NMO_4$)을 대상으로 물질특성(결정상, 표면형태)과 1-naphthol (1-NP)에 대한 제거반응 특성을 회분식 실험을 통하여 수행하였고, 그 결과를 버네사이트에서의 결과와 비교 분석하였다. 천연망간산화물은 출처에 따라 버네사이트(${\delta}-MnO_2$)외에도 크립토멜란(${\alpha}-MnO_2$), 연망간석(${\beta}-MnO_2$) 등의 다양한 표면 특성을 동시에 가지고 있었으며, 이러한 표면 특성으로 인해 제거효율(제거율, 반응속도) 및 제거반응(흡착 또는 산화-변환제거)에서 차이를 보였다. 특히, $NMO_1$(전해망간산화물)은 버네사이트에 비교해서도 우수한 1-NP의 산화-변환 제거효율을 보임을 알 수 있었다. 망간산화물에 의한 1-NP의 제거는 모두 유사-일차속도 식을 따랐으며, 각 망간산화물의 비표면적으로 표준화하여 얻은 속도상수($k_{surf},\;L/m^2$ min) 값은 $NMO_1(3.31{\times}10^{-3})$>${\delta}-MnO_2(1.48{\times}10^{-3}){\fallingdotseq}NMO_3(1.46{\times}10^{-3})$>$NMO_2(0.83{\times}10^{-3})$>$NMO_4(0.67{\times}10^{-3})$의 순이었다. 또한, 반응후 침전층에 대한 용매추출실험을 통해 평가한 1-NP의 산화-변환 반응효율은 $NMO_1{\fallingdotseq}{\delta}-MnO_2$>$NMO_3$>$NMO_4{\gg}NMO_2$의 순이었으며, 반응산물은 반응여액(상등액)에 대한 HPLC 크로마토그램, UV-vis. 흡광도비($A_{2/4}$, $A_{2/6}$) 분석을 통해 버네사이트에서와 같이 1-napthol의 산화-결합 반응에 의한 것임을 확인하였다. 이상의 결과로부터 본 실험에 사용한 천연망간산화물($NMO_2$ 제외)은 1-NP의 제거에 효과적으로 적용될 수 있으며, 반응효율은 망간산화물의 출처에 따른 표면특성에 따라 차이가 있음을 확인하였다.

• Journal of applied mathematics & informatics
• /
• 제30권1_2호
• /
• pp.219-234
• /
• 2012

By using the generalized Riccati transformation and the inequality technique, we establish some new oscillation criterion for the second-order nonlinear delay dynamic equations $$(a(t)(x^{\Delta}(t))^{\gamma})^{\Delta}+q(t)f(x({\tau}(t)))=0$$ on a time scale $\mathbb{T}$, here ${\gamma}{\geq}1$ is the ratio of two positive odd integers with $a$ and $q$ real-valued positive right-dense continuous functions defined on $\mathbb{T}$. Our results not only extend and improve some known results, but also unify the oscillation of the second-order nonlinear delay differential equation and the second-order nonlinear delay difference equation.

• 대한화학회지
• /
• 제17권2호
• /
• pp.122-125
• /
• 1973

시차열곡선에서 Pyrolusite $({\beta}-MnO_2)$의 결정 전이의 흡열 Peak를 이용하여 분석 화학적인 재현성을 검토한 결과 Pyrolusite의 량이 50mg∼450mg까지는 정량적이었다. ${\alpha}-MnO_2$는 흡열 Peak가 중첩되어 파의 분리가 불가능하였으며, ${\gamma}-MnO_2$(전해이산화망간)와 ${\delta}-MnO_2$는 오차 범위 ${\pm}5{\%}{\sim}{\pm}10{\%}$이내에서 조제시료중 Pyrolusite만을 정량할 수 있다.

• Journal of applied mathematics & informatics
• /
• 제40권3_4호
• /
• pp.657-668
• /
• 2022

In the present paper we introduce and study Euler sequence spaces of fractional difference and backward difference operators. We make an effort to prove that these spaces are BK-spaces and linearly isomorphic. Further, Schauder basis for Euler fractional difference sequence spaces $e^{\varsigma}_{0,p}({\Delta}^{(\tilde{\beta})},\;{\nabla}^m)$ and $e^{\varsigma}_{c,p}({\Delta}^{(\tilde{\beta})},\;{\nabla}^m)$ are also elaborate. In addition to this, we determine the 𝛼-, 𝛽- and 𝛾- duals of these spaces.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.658-663
• /
• 2003

A process of 3-D stereo particle image velocimetry(PIV)was developed for the measurement of an illuminated sliced section field of 3-D complex flows. The present method includes modeling of camera by a calibrator based on the homogeneous coordinate system, transformation of the oblique-angled image to the right-angled image, identification of 2-D velocity vectors by 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criteria, and finally 3-D display as the post processing. An experimental system was also used for the application of the proposed method. Two high speed digital CCD cameras and an Argon-Ion Laser for the illumination were adopted to clarify the time-dependent characteristics of the leading edge extension(LEX) in a highly swept shape applied to a delta wing found in modern air-fighters.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권1호
• /
• pp.1-12
• /
• 2017

Nitrate ($NO_3^-$), a common surface water and groundwater pollutant, poses a serious environmental problem in regions with intensive agricultural activities and dense population. It is thus important to identify the source of nitrate contamination to better manage water quality. Due to the distinct isotope compositions of nitrate among different origins, the dual isotope analysis (${\delta}^{15}N$ and ${\delta}^{18}O$) of nitrate has been widely applied to track contamination sources. This paper provided the underlying backgrounds in the isotope analysis of nitrate, which included typical ranges of ${\delta}^{15}N$ and ${\delta}^{18}O$ from various nitrate sources, isotope fractionation, the analytical methods used to concentrate nitrate from samples, and the potential limitations of the dual isotope analysis along with the resolutions. To enhance the applicability of the dual isotope analysis as well as increase the ability to interpret field data, this paper also introduced several case studies. Furthermore, other environmental tracers including ${\delta}^{11}B$ and $Cl^-/Br^-$ ratios were discussed to accompany the dual isotope analysis for better assignment of contamination sources even when microbial transformation of nitrate and/or mixing between contaminant plumes occur.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.49-52
• /
• 2005

In this study, abiotic transformation of 1-naphthol via oxidative-coupling reaction was evaluated using Mn oxide which is ubiquitous in natural soils. The transformation of 1-naphthol catalyzed by synthetic birnessite $({\delta}-MnO_2)$ followed pseudo-lst order reaction, and the rate constants was in the range of $0.053{\sim}0.13\;min^{-1}$ with birnessite loadings of $12.5{\sim}50\;mg/20\;mL$. Since the oxidation of 1-naphthol was occurred on the reactive surface of the oxide particles, the rate constants with various birnessite loadings were correlated with birnessite surface area concentration. The correlation showed a strong linearity, which confirms the supposition of the surface reaction. From the correlation, therefore, the surface area normalized rate constant, $k_{surf}$, was determined to be 0.032 $L/m^2\;min$.

• 열처리공학회지
• /
• 제4권4호
• /
• pp.34-43
• /
• 1991

A small amount of misch metal and/or Zr was added as a dopant to 70.5wt----Cu-26wt----Zn-3.5wt----Al shape memory alloy in order to study the effect of grain refinement and heat treatments on the transformation behavior, stabilization of martensite, and shape memory ability. It was found that the addition of misch metal and Zr was very effective for reducing the grain size. The fracture mode has been changed from intergranular brittle fracture to ductile fracture with void formation and coalescence by the addition of misch metal and Zr. Aging of the ${\beta}$-phase decreases the $M_s$ temperature, but that of the martensite phase increases the $A_s$ temperature. The hysteresis of transformation temperature ${\Delta}T(A_s-M_s)$ has an increasing tendancy by grain refinement. The crystal structure of martensite was identified as monoclinic structure. As the grain size decreased, martensite stabilization more easily occured and the shape, memory ability has been reduced by the grain size refined.

• Corrosion Science and Technology
• /
• 제19권3호
• /
• pp.146-155
• /
• 2020

To elucidate the effect of heat inputs on phase transformation and resistance to intergranular corrosion of F316 austenitic stainless steel (ASS), thermodynamic calculations of each phase and time-temperature-transformation diagram were conducted using JMaPro simulation software, oxalic acid etch test, double-loop electrochemical potentiokinetic reactivation test (DL-EPR), field emission scanning electron microscopy with energy dispersive spectroscopy, and transmission electron microscopy analyses of Cr carbide (Cr₂₃C₆), austenite phase and ferrite phase. F316 ASS containing a relatively low C content of 0.043 wt% showed a slightly sensitized microstructure (acceptably dual structure) due to a small amount of Cr carbide precipitated at heat affected zone irrespective of heat inputs. Based on results of DL-EPR test, although heat input was increased, the ratio of I_r to I_a was only increased very slightly due to a slight sensitization. Therefore, heat inputs have little influences on resistance to intergranular corrosion of F316 austenitic stainless steel containing 0.043 wt% C.