• The Journal of Advanced Prosthodontics
• /
• v.6 no.5
• /
• pp.333-345
• /
• 2014

PURPOSE. Bonding agents (BA) are the crucial weak link of composite restorations. Since the commercial materials' compositions are not disclosed, studies to formulize the optimum ratios of different components are of value. The aim of this study was to find a proper formula of BAs. MATERIALS AND METHODS. This explorative experimental in vitro study was composed of 4 different sets of extensive experiments. A commercial BA and 7 experimental formulas were compared in terms of degree of conversion (5 experimental formulas), shear bond strength, mode of failure, and microleakage (3 experimental formulas). Statistical analyses were performed (${\alpha}$=.05). The DC of selected formula was tested one year later. RESULTS. The two-way ANOVA indicated a significant difference between the shear bond strength (SBS) of two tissues (dentin vs. enamel, P=.0001) in a way that dentinal bonds were weaker. However, there was no difference between the four materials (P=.283). The adhesive mode of failure was predominant in all groups. No differences between the microleakage of the four materials at occlusal (P=.788) or gingival (P=.508) sites were detected (Kruskal-Wallis). The Mann-Whitney U test showed a significant difference between the microleakage of all materials (3 experimental formulas and a commercial material) together at the occlusal site versus the gingival site (P=.041). CONCLUSION. A formula with 62% bisphenol A-glycidyl methacrylate (Bis-GMA), 37% hydroxy ethyl methacrylate (HEMA), 0.3% camphorquinone (CQ), and 0.7% dimethyl-para-toluidine (DMPT) seems a proper formula for mass production. The microleakage and SBS might be respectively higher and lower on dentin compared to enamel.

• Journal of Sensor Science and Technology
• /
• v.29 no.1
• /
• pp.27-32
• /
• 2020

This study proposes a pixel-patterning method for organic light-emitting diodes (OLEDs) based on thermal transfer. An infrared lamp was introduced as a heat source, and glass type donor element, which absorbs infrared and generates heat and then transfers the organic layer to the substrate, was designed to selectively sublimate the organic material. A 200 nm-thick layer of molybdenum (Mo) was used as the lightto-heat conversion (LTHC) layer, and a 300 nm-thick layer of patterned silicon dioxide (SiO₂), featuring a low heat-transfer coefficient, was formed on top of the LTHC layer to selectively block heat transfer. To prevent the thermal oxidation and diffusion of the LTHC material, a 100 nm-thick layer of silicon nitride (SiN_x) was coated on the material. The fabricated donor glass exhibited appropriate temperature-increment property until 249 ℃, which is enough to evaporate the organic materials. The alpha-step thickness profiler and X-ray reflection (XRR) analysis revealed that the thickness of the transferred film decreased with increase in film density. In the patterning test, we achieved a 100 ㎛-long line and dot pattern with a high transfer accuracy and a mean deviation of ± 4.49 ㎛. By using the thermal-transfer process, we also fabricated a red phosphorescent device to confirm that the emissive layer was transferred well without the separation of the host and the dopant owing to a difference in their evaporation temperatures. Consequently, its efficiency suffered a minor decline owing to the oxidation of the material caused by the poor vacuum pressure of the process chamber; however, it exhibited an identical color property.

• Mass Spectrometry Letters
• /
• v.4 no.2
• /
• pp.30-33
• /
• 2013

Chalcones are naturally occurring, biologically active molecules generating interest from a wide range of research applications including synthetic methodology development, biological activity investigation and studying fragmentation patterns. In this article, a series of chalcones has been synthesized and their fragmentation behavior was studied using modern ambient ionization technique Direct Analysis in Real Time (DART). DART ion source connected with an ion trap mass spectrometer was used for the fragmentation of various substituted chalcones. The chalcones were introduced to the DART source using a glass capillary without sample preparation step. All the chalcones showed prominent molecular ion peaks $[M]^{{\cdot}+}$ corresponding to the structures. Multistage mass spectral data $MS^n$ ($MS^2$ and $MS^3$) were collected for all the chalcones studied. The chalcones with substitutions at 3, 4 or 5 positions gave product ion peaks with the loss of a phenyl radical ($Ph^{\cdot}$) by radical initiated ${\alpha}$-cleavage, while substitution at 2 position of chalcone in the A-ring gave a product ion peak with the loss of substituted styryl radical (PhCH = $CH^{\cdot}$). In case of the chalcones with the substituent at 4 positions in A and B rings gave both types of fragmentation patterns. In conclusion, chalcones can be easily characterized using modern DART interface in very short time and efficiently without any cumbersome sample pretreatment.

• Journal of Radiation Protection and Research
• /
• v.24 no.1
• /
• pp.1-7
• /
• 1999

Using the TBP slovent extraction method, a simple and precise method for determining uranium isotopes in the environment samples was developed. The soil sample was decomposed with $HNO_3$ and HF. Uranium isotopes were extracted with 15% TBP in $CCl_4$ from aqueous phase to organic phase, and Th fraction was removed with 8M HCl. Uranium fraction was purified in back extraction step with 1M HCl. Optimized electrode position conditions of uranium Isotopes were set using a new electrode position solution including a DTPA chelating agent. The new method of uranium isotopes determination was validated with a result of application to IAEA Reference Soils.

• The Korea Journal of Herbology
• /
• v.30 no.3
• /
• pp.19-24
• /
• 2015

Objectives : HPL-1, a novel herbal medicine which is composed of five herbs such as Kalopanacis Cortex, Chaenomelis Fructus, Raphani Semen, Atractylodis Rhizoma and Pulvis Aconiti Tuberis Purificatum, was developed for treatment of osteoarthritis. This study is aimed to develop analytical method for consistent quality control of HPL-1 and validate chromatographic method. Methods : Chromatographic analysis was performed using ultra-high performance liquid chromatography - diode array detector (UHPLC-DAD) equipped with RP-amide column, column oven, and auto sampler. Marker compounds [protocatechuic acid, chlorogenic acid, liriodendrin, 3,5-dicaffeoylquinic acid, ${\beta}$-D-(3-O-sinapoyl)-fructofuranosyl-$\alpha$-D-(6-O-sinapoyl)glucopyranoside and benzoylmesaconine] were separated by step gradient elution of acetonitrile and 0.1% phosphoric acid/water. The method validation was evaluated by quantitative validation parameters of linearity, accuracy, precision, limit of detection (LOD) and limit of quantification (LOQ) according to KFDA guideline.Results : An optimized method for six marker compounds in HPL-1 was established by UHPLC-DAD. The correlation coefficient (R²) with each calibration curve was greater than 0.99. The LOD and LOQ were within the range of 0.008-0.090 and $0.023-0.274{\mu}g/mL$, respectively. The relative standard deviation (RSD) of intra- and inter-day variability were less than 4.0%. The result of recovery test was range from 93.3-106.3% with RSD < 4.0%.Conclusions : These results suggest that the quantitative UHPLC method is precise, accurate, effective for quality evaluation of HPL-1. The method may also contribute to improve quality of crude drug preparations used for treatment of various diseases.

• Journal of Microbiology
• /
• v.43 no.3
• /
• pp.313-318
• /
• 2005

In this study, we demonstrate the use of a PCR-based method for the detection of the specific genes involved in natural-product biosynthesis. This method was applied, using specifically designed PCR primers, to the amplification of a gene segment encoding for sedo-heptulose 7-phosphate cyclase, which appears to be involved in the biosynthetic pathways of $C_7N$ aminoacyclitol or its keto analogue-containing metabolites, in a variety of actinomycetes species. The sequences of DNA fragments (about 540 bp) obtained from three out of 39 actinomycete strains exhibited a high degree of homology with the sedo-heptulose 7-phosphate cyclase gene, which has been implicated in acarbose biosynthesis. The selective cultivation conditions of this experiment induced the expression of these loci, indicating that the range of $C_7N$ aminoacyclitol or its keto analogue-group natural products might be far greater than was previously imagined. Considering that a total of approximately 20 $C_7N$ aminoacyclitol metabolites, or its keto analogue-containing metabolites, have been described to date, it appears likely that some of the unknown loci described herein might constitute new classes of $C_7N$ aminoacyclitol, or of its keto analogue-containing metabolites. As these metabolites, some of which contain valienamine, are among the most potent antidiabetic agents thus far discovered, the molecular detection of specific metabolite-producing actinomycetes may prove a crucial step in current attempts to expand the scope and diversity of natural-product discovery.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.513-533
• /
• 1994

The smooth surface after polishing of composite resin contributes to the patient's comfort, and appearance and longevity of the restoration. This study was performed for the quantitative analysis of the effects of the various finishing and polishing instruments on the surface roughness and reflectivity of the microfill, and hybrid composite resins. Cylindrical specimens 2mm thick and 10mm in diameter of Silux Plus, Durafill VS ; Z100, Prisma TPH, Brilliant, and Herculite XR composite resin were polymerized under the matrix strip. 18 specimens for each composite resin materials were divided into 6 groups ; 5 experimental groups were abraded with # 600 sand paper to remove resin-rich layer, except control. Thereafter, using diamond bur(Mani Dia-Burs), carbide bur(E. T. carbide set 4159), rubber point(Composite polishing kit), aluminum-oxide disk(Sof-Lex disk), polishing paste(Enhance system) ; each specimen was polished to its best achievable surface according to manufacturer's directions. Final polished surfaces were evaluated for the surface roughness with profilometer(${\alpha}$-step 200, Tencor instruments, USA) and for the reflectivity with image analyser(Omniment Image Analyser, Buehler, USA). The results were as follows. 1. Polishing paste or aluminum-oxide disk finish in the microfill, and hybrid composite resins was as smooth as matrix strip finish on the surface roughness test. 2. Polishing paste or aluminum-oxide disk finish in the microfill ; polishing paste finish in the hybrid composite resins was as reflective as matrix strip finish on the refectivity test. 3. For the polishing paste, there were no significant differences between the composite resin materials on the surface roughness and refectivity tests. 4. For the aluminum-oxide disk, the best result was obtained with the microfill composite resin on the surface roughness and reflectivity test. 5. Diamond bur, carbide bur, and rubber point were inappropriate for the final polishing instruments.

• Resources Recycling
• /
• v.9 no.2
• /
• pp.46-52
• /
• 2000

Aluminum can to can recycling was divided into two stpes. The first step was composed of the processes such as collection of used beverage cans (UBC), shredding, magnetic separation, De-laquiring, melting and casting. The second one was remelting and casting, heat treating, hot and cold rolling, annealing, and can making. In this study, the effect of alloying elements on the microstructure and texture of the secondary ingots made by Al UBC was investigated. In aluminum can to can recycling, the second phase particles appeared in the solidification stage must be controlled by heat treatment. The optimum heat treatment condition was $615^{\circ}C$ for 5hrs. the texture in hot rolled sheet was depressed with increasing Mn content, on the other hand, Si and Fe elements promoted the texture development. The textures of can-body sheet should be controlled in the hot rolling and annealing stage because can was formed from cold rolled sheet without heat treatment.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.4
• /
• pp.232-237
• /
• 1993

A strain of yeast which can convert starch directly to ethanol was developed by the intergeneric protoplast fusion between Schwanniomyces alluvius possessing $\alpha$ amylase as well as glucoamylase with debranching activity and FSC-14-75 which previously had been formed from a heterologous transformation and subsequent intergeneric protoplast fusion. Fusants were selected on minimal medium after protoplasts of auxotrophic mutant of S. alluvius fused with heat-treated protoplasts of FSC-14-75 in the presence of 30%(w/v) PEG and 20 mM $CaCl_2$. The fusion frequency was in the range of $10^{-6}$ order. All fusants tested were intermediate types of parental strains for carbon compound assimilation, and their cell volumes were approximately 1.1 times larger than FSC-14-75 and 1.8 times larger than S. alluvius. The fusants were unable to sporulate like FSC-14-75, while S. alluvius could sporulate. In flask scale the most promising fusant, FSCSa-R10-6, produced 7.83%(v/v) and 10.17%(v/v) ethanol from 15% and 20% of liquefied potato starch, respectively, indicating that the fermetation efficiency of each case increased 1.2 times and 1.6 times than that of FSC-14-75. The elution pattern on DEAE-cellulose chromatography showed that FSCSa-R10-6 has four distinct amylase peaks of which two peaks originated from S. alluvius and the other two from FSC-14-75. These results suggest that the enhanced fermentation efficiency of the fusant might be due to almost-complemented parental amylases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.94-94
• /
• 1998

최근 a-CH:N (hydrogenated amorphous carbon nitride)가 a-CH 보다 팡학적, 기계객성 질이 우수하므로 이에 대한 연구가 활발하게 진행되고 있다. 본 실험에선 원료 가스의 유량 은 5 sccm으로 고정시킨 채 원료가스내의 질소 대 메탄 혼합비 (N2ICHa)훌 O 에서 4 까지 변 화시 키 띤서 DC saddle-field PECVD (plasma enhanced chemical vapour d야Xlsition)훌 이 용하여 a-CH:N 박막융 제작하여, 가스 혼합비가 박막의 미세구조와 광학척 성질에 미치는 영향올 연구하였다. 박막 성장시 진공조 내의 압력온 throttle valve롤 사용하여 90 mTorr로 일정하게 유지하였으며 양극 전압과 기판전업은 각각 500 V, 200 V로 고청하고 상온에서 중 착하였다. a a -step으로 측정 한 a-C:H:N 박막의 두께는 혼합가스내의 질소의 양이 증가할수륙 4800 A에서 2000 A로 두께가 감소하였지만 표면 rot핑비less는 혼합가스내의 질소의 양이 중가할 수록 중가함을 AFM (atomic force mi$\alpha$'0 scopy) 으로 관찰하였다. 박막내의 C와 N의 정량 분석은 RES (Rutherford back scattering s야ctroscopy) 핵공명법을 이용하여 분석하였다. X XPS (X -ray photoelectron spec$\sigma$oscopy) 와 FT-IR (Fo삐er transform-infrared s spectrometry)로 미세구조률 측정한 결과 혼합가스내의 질소의 양이 충가할수록 C-H기는 감 소하였지 만 C르N, N-H기 는 늘어 났다. 또한 PL (photoluminescence) 측정 결과 웬료가스 내 메탄과 질소의 비율이 1:1일 때 최대의 발광올 보였고 UVS (비없 vi이et spec$\sigma$orne$\sigma$y)으 로 측정한 광학쩍 에너지 캡은 혼합비내의 질소의 양이 증가할수록 2.53 eV에서 2.3 eV로 감 소하였다. 이를 결과로부터 원료가스내의 N2ICHa의 중가에 따른 박막의 미세구조 변화와 광학척 생 질의 상관 관계가 고찰될 것이다.