• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.3
• /
• pp.280-285
• /
• 1999

$\alpha$-$Fe_2O_3$ thin film gas sensors were deposited at various temperature by CVD method. Polycrystalline $\alpha$-$Fe_2O_3$ thin films were deposited at $175^{\circ}C$ and $200^{\circ}C$. $\gamma$-$\alpha$-$Fe_2O_3$ phase was obtained when the deposition temperature was higher than $250^{\circ}C$. The crystallite size of $\alpha$-$Fe_2O_3$ was affected by the deposition and annealing temperature. The specimen deposited at $175^{\circ}C$ showed maximum sensitivity. In this condition, the sensitivity of $\alpha$-$Fe_2O_3$ thin film for NO gas (at 250 ppm) was 3.2 and response time (at 100ppm) was 12 second.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.226-232
• /
• 2002

We searched thermal stability of ${\alpha}-Fe_2O_3$ using red color filter for display. In the PDP(Plasma Display Panel), the color filter layer is lied normally between front glass and transparent dielectric materials, so it might be needed to study the reaction of ${\alpha}-Fe_2O_3$ and transparent dielectric materials. The transparent dielectric materials containing ZnO has good transparency. Red colorlayer of ${\alpha}-Fe_2O_3$ contacted with dielectric material layer containing ZnO is changed to colorlessness over 500$^{\circ}$C because ZnO defuse ${\alpha}-Fe_2O_3$, the dielectric materials without ZnO, however, maintain red color at the same condition. We suggest that a layer contacting with ${\alpha}-Fe_2O_3$ red color layer has to lie with transparent dielectric materials without ZnO, then the materials containing ZnO is coated over to get color of ${\alpha}-Fe_2O_3$ for red color filter

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.185-190
• /
• 1999

An $Al_2O_3/Fe$ composite was synthesized through the double stage processes by a reaction sintering which requires simple process and equipments but provides near-net-shape, a reduction/oxidation process for 5 hrs at $650^{\circ}C$ was followed by sintering at $1200^{\circ}C$ to form an $Al_2O_3/Fe$ composite. The composite processed through the double stage sintering are mainly consists of $\alpha$-Fe and ${\alpha}Al_2O_3$ with minor amount of $FeAl_2O_4$, a spinnel structure which is known to prevent Fe from filling up the pores and good contact with $Al_2O_3/Fe$ particles.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.5
• /
• pp.189-193
• /
• 2004

Pure and Sn or Pt doped $\alpha-Fe_2O_3$ thin films were prepared on $Al_2O_3$ substrates by RF-magnetron sputtering method and the sensitivities were compared. It was found that pure $\alpha-Fe_2O_3$ thin films did not exhibit much selectivity in CO and $i-C_4H_{10}$ gases while it showed the high sensitivity in proportion to the gas concentration of $C_2H_{5}OH$ gas. Pt-doped $\alpha-Fe_2O_3$ showed to be alike sensing properties as pure $\alpha-Fe_2O_3$ thin film in $C_2H_{5}OH$ gas. However, Sn-doped $\alpha-Fe_2O_3$ thin films exhibited the excellent sensitivity and selectivity in Hz gas. After microstructure modification by plasma etching on pure $\alpha-Fe_2O_3$ thin films, the gas sensing characteristics were dramatically changed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.138-144
• /
• 1998

$\alpha$-$Fe_2O_3$ fine powders with the sizes smaller than 0.5 $\mu \textrm{m}$ were prepared by the solvolysis and condensation reaction using iron(III) nitrate and ethanol as starting materials. The variation of pH and the change of FT-IR absorption peak were observed to study the reaction mechanism of iron(III) nitrate solution. In addition, the decomposition mechanism of the precipitated gel was investigated by differential scanning calorimeter, X-ray diffractometer and FT-IR spectrometer. Scanning electron microscope and BET method were performed to analyze the effects of Iron (III) nitrate concentration and reaction temperature on the particle size of $\alpha$-$Fe_2O_3$ powders.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.14-23
• /
• 2018

$TiO_2-coated$ cubic ${\alpha}-Fe_2O_3$ with mostly exposed (012) and (101) facets (${\alpha}-Fe_2O_3@TiO_2$) was fabricated using a hydrothermal route for the photo-Fenton degradation of tetracycline under visible light irradiation. $TiO_2$ coating could greatly affect the photocatalytic activity of ${\alpha}-Fe_2O_3@TiO_2$. Compared with cubic ${\alpha}-Fe_2O_3$ alone for photodegradation of tetracycline, ${\alpha}-Fe_2O_3@TiO_2$ with $TiO_2$ shell of around 15 nm exhibited higher removal efficiency of tetracycline in photo-Fenton system, and its durability was slightly affected after five cycle times under same conditions. It is ascribed to the well-matched interface between cubic ${\alpha}-Fe_2O_3$ core and $TiO_2$ shell, leading to the broadened light-absorption and the efficient separation of photo-generated electon-hole pairs. The $^{\bullet}OH$ radicals were main responsible for the advanced photocatalytic performance of ${\alpha}-Fe_2O_3@TiO_2$ in visible-light driven degradation of tetracycline.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.400-405
• /
• 2016

Ferric oxide (${\alpha}-Fe_2O_3$, hematite) is an n-type semiconductor; due to its narrow band gap ($E_g=2.1eV$), it is a highly attractive and desirable material for use in solar hydrogenation by water oxidation. However, the actual conversion efficiency achieved with $Fe_2O_3$ is considerably lower than the theoretical values because the considerably short diffusion length (2-4 nm) of holes in $Fe_2O_3$ induces excessive charge recombination and low absorption. This is a significant hurdle that must be overcome in order to obtain high solar-to-hydrogen conversion efficiency. In consideration of this, it is thought that elemental doping, which may make it possible to enhance the charge transfer at the interface, will have a marked effect in terms of improving the photoactivities of ${\alpha}-Fe_2O_3$ photoanodes. Herein, we report on the synthesis by pulsed electrodeposition of ${\alpha}-Fe_2O_3$-based anodes; we also report on the resulting photoelectrochemical (PEC) properties. We attempted Ti-doping to enhance the PEC properties of ${\alpha}-Fe_2O_3$ anodes. It is revealed that the photocurrent density of a bare ${\alpha}-Fe_2O_3$ anode can be dramatically changed by controlling the condition of the electrodeposition and the concentration of $TiCl_3$. Under optimum conditions, a modified ${\alpha}-Fe_2O_3$ anode exhibits a maximum photocurrent density of $0.4mA/cm^2$ at 1.23 V vs. reversible hydrogen electrode (RHE) under 1.5 G simulated sunlight illumination; this photocurrent density value is about 3 times greater than that of unmodified ${\alpha}-Fe_2O_3$ anodes.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.111-120
• /
• 1985

The oxidation reaction of CO on the catalysts 4 mol%, 8 mol%, and 12 mol% Cd-doped ${\alpha}-Fe_2O_3$ is individually investigated. Regardless of Cd doping level, over-all reaction order for the oxidation of CO is 1.5; the first order with respect to CO and the one-half order with respect to $O_2$. Over the temperature range of 350∼$460^{\circ}C$, the activation energy for CO oxidation is 10.10∼11.30Kcal/mol. From the agreement between the kinetic data and conductivity measurements, the reaction mechanism is suggested. Especially from the effect of Cd doping, the fact that catalytic activity of ${\alpha}-Fe_2O_3$ is due to the excitation of electrons which are traped on oxygen vacancy is found, and the adsorption sites for reactant molecules are found.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.380-390
• /
• 1993

Effect of interfacial electrical conditions on adhesion of ${\alpha}-Fe_2O_3$ particles to PET fabric and the removal of ${\alpha}-Fe_2O_3$ particles from PET fabric, were investigated as functions of pH, electrolyte and ionic strength. The ${\zeta}$ potential of PET fiber and ${\alpha}-Fe_2O_3$ particles in the electrolyte solution were measured by streaming potential and microelectrophoresis methods respectively. The potential energy of interaction between ${\alpha}-Fe_2O_3$ particles and PET fabric were calculated by using the heterocoagulation theory for a sphere-plate model. The negative ${\zeta}$ potential of ${\alpha}-Fe_2O_3$ particle and PET fiber increased with pH, and then decreased certain pH and isoelectric points of ${\alpha}-Fe_2O_3$ particles and PET fiber were pH 6.5 and pH 3.5, respectively. The negative ${\zeta}$ potential of ${\alpha}-Fe_2O_3$ particle and PET fiber affected by electrolytes, were relatively high with polyanion electrolytes in solutions and were low with neutral salts. However, at surfactant solution, ${\zeta}$ potential was levelled off. The influence of the ionic strength on the ${\zeta}$ potential of ${\alpha}-Fe_2O_3$ particle was small but the negative ${\zeta}$ potential of PET fiber increased with the ionic strength. In the presence of anionic surfactant, the ${\zeta}$ potential of ${\alpha}-Fe_2O_3$ particle and PET fiber increased regardless of solution conditions. The interaction energy between ${\alpha}-Fe_2O_3$ particle and PET fabric increased with pH. The interaction energy was relatively high with polyanion electrolytes in solution, and the influence of ionic strength on the interaction energy was small, and the effective thickness of electrical double layer increased with decreasing the ionic strength.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.17-22
• /
• 1999

Hexagonal M-type barium ferrite $BaFe_{12}O_{19}$ was prepared by a direct solid state reaction between $BaCO_3$ and ${\Alpha}-Fe_2O_3$ powders at temperatures ranging from 800 to 1000 $^{\circ}C$ in a nitrogen or air environment. The effects of NaCl on phase transformation of mixture of $BaCO_3$ and ${\Alpha}-Fe_2O_3$ to $BaFe_{12}O_{19}$ were studied using X-ray diffraction and M$\"{o}$ssbauer spectroscopy. Regardless of the environment for heat treatment or the added NaCl, two phases, BaFe and ${\Alpha}-Fe_2O_3$, coexist for samples heat treated at 800 $^{\circ}C$, but a single phase was observed from samples heat treated at 100$0^{\circ}C$ in both air and nitrogen environments. It was found that the addition of NaCl reduced the amount of $a-Fe_2O_3$ phase.hase.