• 자원리싸이클링
• /
• 제3권3호
• /
• pp.21-26
• /
• 1994

국내에서 산출되고 있는 반토혈암으로부터 고순도 $\alpha-Al_2O_3$를 얻기 위하여 황산암모늄을 사용한 염배소와 황산을 이용한 추출 그리고 하소 실험을 하였다. 황산의 농도, 반응시간, 온도 등이 알루미나 추출에 미치는 영향에 대하여 조사하였으며, 반응산물은 X-ray, DTA-TG, 화학분석, SEM 등으로 분석하였다. 추출조건은 전처리 조건으로 황산암모늄의 농도가 0.6M, 배소온도가 $650^{\circ}C$였으며, 황산추출은 황산농도 10%로 240분간 추출할 경우 96%의 수율을 나타내었다. 생성된 $Al_2O_3$ 분말을 X-ray 분석한 결과 $\alpha-Al_2O_3$였으며 그 순도는 99.23%였다.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.428-433
• /
• 1999

본 연구는 $0.1~1.2\mu\textrm{m}$ 압도분포를 갖는 미세 $Al_2O_3$를 이용하여 플라츠마 용사한 후 상업용 용사분말(Metco 105)과 용사층의 특성을 비교하였다. 미세조직은 미세 $Al_2O_3$층이 상업용분말보다 더 치밀하였고 용샤층의 평균 표면조도 $(R_a)$는 미세 $Al_2O_3$의 경우에 $5.3\mu\textrm{m}$로 상업용 분말 $(R_a=8.2\mu\textrm{m})$ 보다 작은 값을 보였으며, 용사층 평균 splat 두께는 $1.4\mu\textrm{m}$ 였다. 또한 용샤층에는 많은 양의 부분 용융입자가 관찰되었다. XRD분석결과 두 분말 모두 용사층을 이루는 주된 상은 $\gamma-Al_2O_3$이였으며 $\alpha-Al_2O_3$도 관찰되었다. 용사층에 존재하는 $\alpha-Al_2O_3$의 분율은 미세 $Al_2O_3$층의 경우 8.39%. 상업용 $Al_2O_3$의 경우 13.79%이였다. 미세 경도 값은 두 분말에서 큰 차이를 보이지는 않았으나, 미세 $Al_2O_3$의 경우 큰 경도값 편차를 보였으며 따라서 미세 $Al_2O_3$층의 splat의 접합강도는 상업용 $Al_2O_3$보다 상대적으로 낮을 것으로 생각된다.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.445-451
• /
• 1989

Hydrolysis of aluminum isopropoxide with excess water in the presence of excess isopropyl alcohol resulted in the formation of boehmite in independence of temperature of hydrolysis and aging. Stoichiometric and substoichiometric amount of water hydrolyzed aluminum isopropoxide to pseudo-boehmite and amorphous one, respectively. $\alpha$-Al2O3 with 0.3${\mu}{\textrm}{m}$ in median size was produced by calcination of boehmite, bseudo-boehmite and amorphous boehmite at 125$0^{\circ}C$, 120$0^{\circ}C$, and 115$0^{\circ}C$ for one hour, respectively. Singnificant reduction in particle size was found during transition from $\theta$-Al2O3 to $\alpha$-Al2O3. $\alpha$-Al2O3 produced in this study was relatively uniform spherical and its purity was found to be over 99.9%.

• 한국결정성장학회지
• /
• 제7권2호
• /
• pp.259-270
• /
• 1997

$\alpha-Al_2O_3$와 비정질 $TiO_2$부터 $Al_2TiO_5$를 합성하기 위한 고체상태반응의 반응속도를 $1200~1300^{\circ}C$ 온도 범위에서 연구하였다. 반응속도는 $Al_2O_3$분말을 코팅한 50 mol%의. $TiO_2$와 일정한 온도에서 여러 시간동안 가열하여 생성된 혼합물에 의하여 결정되었다. MgO안의 반응물과 미반응물의 양은 X-선 회절분석에 의하여 결정되었다. $Al_2TiO_5$의 부피율과 peak intensity비의 자료로부터 $Al_2O_3$와 $TiO_2$의 pseudobrookite(Tialite)형태로의 반응은 $1280^{\circ}C$와 $1300^{\circ}C$ 사이에서 시작되었다. 고체상태반응 활성화 에너지는 Arrhenius식에 의하여 결정되었다. 활성화 에너지는 622.4 kJ/mol이다.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1045-1053
• /
• 1993

Alumina hydrates were prepared by the neutralization of AlCl3.6H2O solution with NH3 gas diluted with N2 gas. The values of pH in reaction solution influenced the formation of alumina hydrates minerals. Amorphous alumina hydrates, for example, were formed at ${\gamma}$-Al2O3longrightarrow$\delta$-Al2O3longrightarrow$\theta$-Al2O3longrightarrow$\alpha$-Al2O3. (2) Bayeritelongrightarrowamorphouslongrightarrow${\gamma}$-Al2O3longrightarrow$\delta$-Al2O3longrightarrowη-Al2O3longrightarrow$\theta$-Al2O3longrightarrow$\alpha$-Al2O3. On the other hand, the shape of alumina hydrates whichw ere prepared by the reacton of Al2(SO4)3.16H2O solution and NH3 gas was spherical, the progress of its phase transformation with increasing temperature was amorphouslongrightarrow${\gamma}$-Al2O3longrightarrow$\alpha$Al2O3 in sequence.

• Transactions on Electrical and Electronic Materials
• /
• 제9권3호
• /
• pp.96-100
• /
• 2008

The microstructure, voltage-current, and capacitance-voltage relations ofP CCYA doped ZnO-based varistors were investigated for different amounts of $Al_2O_3$. As the $Al_2O_3$ amount increased, the average grain size (d) increased from d=4.3 to $d=5.5{\mu}m$ and the sintered density $({\rho})$ increased from ${\rho}=5.63$ to ${\rho}=5.67g/cm^3$. As the $Al_2O_3$ amount increased, the breakdown voltage $(V_B)$ increased from $V_B=633$ to $V_B=71$ V/mm and the non-ohmic coefficient $({\alpha})$ increased from ${\alpha}=47$ to ${\alpha}=4$. $Al_2O_3$ served as a donor due to the donor density $(N_d)$, which increases in the range of $N_d=0.77-1.85{\times}10^{18}/cm^3$ with increasing amount of $Al_2O_3$.

• 한국의학물리학회지:의학물리
• /
• 제5권2호
• /
• pp.13-20
• /
• 1994

본 연구에서는 감마선 조사, 전자선 조사방법에 의한 전자만의 주업 및 이온 주업 후 전자선조사 방법으로 전자들이 주입된 $\alpha$-$Al_2O_3$의 열자극 발광(Thermoluminescence : TL)에 관련된 결함 형태를 조사하였다. 감마선 조사된 $\alpha$-$Al_2O_3$의 열자극 발광 곡선은 380K, 415K, 440K, 460K 및 475K에서 TL peak가 나타났다. 광흡수 스펙트럼과 자외선 photobleaching 결과로부터 감마선 조사된 $\alpha$-$Al_2O_3$의 380K와 475K TL peak는 F center에, 415K TL peak는 $F^{+}$ center에 기인함을 알았다. 전자선 조사방법에 의하여 전자 주입된 $\alpha$-$Al_2O_3$의 열자극 발광 곡선은 380K, 415K, 440K 및 460K TL peak를 가졌고, $Li^{+}$ 이온 주입 후 전자선 조사방법으로 전자들이 주입된 $\alpha$-$Al_2O_3$는 440K에서 TL peak가 나타났다. 전자선 조사방법에 의한 전자만의 주입과 $Li^{+}$ 이온 주입 후 전자선 조사방법으로 전자들이 주입된 $\alpha$-$Al_2O_3$의 열자극 발광 특성은 380K TL peak는 F center에, 440K TL peak는 $F^{+}$ center에 기인함을 보였다.

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.109-118
• /
• 1996

Al$_2$O$_3$-TiO$_2$powders of six different compositions were plasma-sprayed on Ti substrate. The spray powders and the spray coated layers were analysed and compared using SEM and X-RD. The elastic properties (specific elastic constant and damping coefficient) of the coated specimens were measured in order to select the optimum composition range of ceramics for use in a speaker diaphragm. A correlation between the microstructure and elastic properties was also investigated. When $Al_2$O$_3$powders with 0- 13% TiO$_2$were plasma sprayed, the coated layers were composed of metastable y-Al$_2$O$_3$with small amount of $\alpha$-Al$_2$O$_3$and the content of $\alpha$-Al$_2$O$_3$was increased with TiO$_2$content. Specific elastic constant was rapidly increased with 2 and 13% TiO$_2$addition to $Al_2$O$_3$. The internal damping was nearly unchanged with TiO$_2$content The specific elastic constant seemed to be dependent on the content of $\alpha$-Al$_2$O$_3$in the coated layer.

• 한국재료학회지
• /
• 제12권3호
• /
• pp.220-224
• /
• 2002

The oxide scales formed on $Ni_3Al$-7.8%Cr-1.3%Zr-0.8%Mo-0.025%B after oxidation at 900, 1000 and 110$0^{\circ}C$ in air were studied using XRD, SEM, EPMA and TEM. The oxide scales consisted primarily of $NiO,\; NiAl_2O_4,\;{\alpha}-Al_2O_3,\; monoclinic-ZrO_2,\; and \;tetragonal-ZrO_2$. The outer layer of the oxide scale was rich in Ni-oxides, whereas the internal oxide stringers were rich in Al-oxides and $ZrO_2$. Within the above oxide scales, Cr and Mo tended to exist as dissolved ions.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.100-108
• /
• 1989

Aluminum hydroxides were prepared by the alkoxide hydrolysis method using Al-isopropoxide as a starting material and NH4OH as a catalytic agent. When Al-isopropoxide was hydrolyzed in a H2O-NH3 system, only Al(OH)3 was obtained over all pH values. However, AlOOH was formed besides Al(OH)3 when Al-isopropoxide was hydrolyzed in a H2O-NH3-isopropyl alcohol system. The AlOOH/Al(OH)3 ratio was increased as the isopropyl alcohol content was increased. The hydroxides, Al(OH)3 and AlOOH, obtained in this study and the commerical products, $\alpha$-Al2O3 and AlOOH were subjected to the carbothermal reduction and nitridation reaction to product AlN powder, using carbon black as a reducing agent under N2 atmosphere at various temperatures. AlN was synthesized from the obtained Al(OH)3 and the commercial AlOOH at 145$0^{\circ}C$, however, synthesized from the obtained AlOOH and the commercial alpha-alumina at 135$0^{\circ}C$. The temperature difference is assumed to be attributed to the reactivity of those powders. AlN powder prepared from the Al-isopropoxide was observed to have the narrower particle size distribution than that prepared from the commercial $\alpha$-Al2O3 or AlOOH.